Hob and oven installation · Kent
Hob and oven installation in Gravesend
From the survey to handover, hob and oven installation in Gravesend is run by us as one job, with the fitters and trades booked in the right order.

Thinking about hob and oven installation in Gravesend?
Keen cooks across Kent often choose a range cooker, which needs a level floor, the right clearances to the units and a stability bracket on gas models.
If the oven in your Gravesend kitchen has failed, a like-for-like built-in replacement is usually a short job, provided the new model fits the existing housing. We work throughout Gravesend (DA12) and across the wider Kent area.
What does the job involve?
After the survey visit we write the scope down. For hob and oven installation in Gravesend it usually covers:
- Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models
- Appliance models checked against worktop cut-outs, oven housings and existing supplies
- Induction and ceramic hobs wired to a suitable cooker circuit and tested
- Old hob or oven disconnected safely and taken away for recycling
- Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
- Gas supply moved to a new hob position, with pipework tested and made good
What should you budget for hob and oven installation in Gravesend?
As a starting point for Gravesend, these ranges include VAT at 20% and allow for typical labour costs in the South East. Expect costs in the South East to sit somewhat above UK averages, reflecting local labour rates.
| Typical project | Guide price |
|---|---|
| Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested | £140–£340 |
| Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test | £140–£290 |
| Range cooker installedGas or dual fuel, levelled, stability bracket fitted | £170–£460 |
| New gas pipe run to a new hob positionPipework, testing and making good | £290–£920 |
Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.
Kitchens in homes around Gravesend
Across Kent you will often find Victorian terraces, weatherboarded cottages, 1930s semis and oast house conversions, and each shapes the kitchen differently. Victorian terraces in the Medway towns and along the coast often have a narrow back-addition kitchen, while 1930s semis usually have a small kitchen beside a separate dining room.
Water across Kent is hard, so limescale builds up quickly on taps and boiling water taps, and a scale-reducing filter is worth considering. Seaside terraces, permit parking and narrow village lanes can each make deliveries slower, so the route for long worktops is best checked at the survey.
What rules apply to hob and oven installation in Gravesend?
In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.
Listed weatherboarded and timber-framed cottages, oast conversions and homes in conservation areas such as historic Canterbury may need consent for new external vents.
Before you book hob and oven installation in Gravesend
- If your Gravesend home has an open-flued gas appliance, mention it at the survey, because any new extraction above the hob will need a spillage test.
- Keep the hob's cut-out template and installation manual with the worktop plan, so a stone worktop for your kitchen in Kent can be cut correctly by the fabricator.
- Before buying an induction hob for your Gravesend home, check the rating of the cooker circuit at the consumer unit, or ask for it to be checked at the survey.
- Switching from gas to induction leaves a gas pipe that must be capped safely, so plan that with the Gas Safe engineer at the same visit.
Questions about hob and oven installation in Gravesend
How much does hob and oven installation cost in Gravesend?
Hob and oven installation in Gravesend typically costs £140 to £340 including VAT for connecting a gas hob to an existing supply, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.
Which parts of Gravesend do you work in?
All of them. Our Kent coverage takes in the whole of Gravesend, including the DA12 postcode district, as well as surrounding towns such as Swanscombe. If you are unsure, send us your postcode.
Do built-in ovens need ventilation?
Yes. Built-in ovens release heat, and their installation instructions set the gaps and openings the housing must leave, often at the back or beneath the oven. Blocking them can overheat the surrounding units and the oven's own controls. An oven under the worktop and one in a tall housing have different requirements, so we check the instructions for your model before fitting.
Who is allowed to connect a gas hob?
By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.
Does an induction hob need a new circuit?
Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.
Hob and oven installation in neighbouring towns
The same service is available a short drive from Gravesend, including:
- Hob and oven installation in Swanscombe
- Hob and oven installation in Grays
- Hob and oven installation in Longfield
- Hob and oven installation in Hartley
- Hob and oven installation in Strood
- Hob and oven installation in South Ockendon
- Hob and oven installation across Kent
