Hob and oven installation in Chatham

Thinking about hob and oven installation in Chatham?

Landlords in Kent replacing a worn cooker between tenancies need a safe gas connection or a suitable circuit, with the work properly recorded for their property files.

Some people in Chatham buy a hob and oven online and need them fitted properly, with gas work by a Gas Safe registered engineer and electrics tested and certified. We work throughout Chatham (ME4) and across the wider Kent area.

What is included in the work?

The exact scope is agreed after the survey, but a typical job in Chatham covers:

Induction and ceramic hobs wired to a suitable cooker circuit and tested
Old hob or oven disconnected safely and taken away for recycling
Appliance models checked against worktop cut-outs, oven housings and existing supplies
Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
Built-in single and double ovens fixed into housings with their ventilation gaps

Hob and oven installation prices in Chatham

These guide ranges include VAT at 20% and are adjusted for prices in the South East. We confirm your price in writing after a free survey visit. Prices in the South East usually run above the national guide, mainly because labour and parking cost more.

Hob and oven installation prices in Chatham
Typical project	Guide price
Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested	£140–£340
Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test	£140–£290
Range cooker installedGas or dual fuel, levelled, stability bracket fitted	£170–£460
New gas pipe run to a new hob positionPipework, testing and making good	£290–£920

Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.

What kind of kitchens do we fit in Chatham?

Across Kent you will often find Victorian terraces, weatherboarded cottages, 1930s semis and oast house conversions, and each shapes the kitchen differently. Victorian terraces in the Medway towns and along the coast often have a narrow back-addition kitchen, while 1930s semis usually have a small kitchen beside a separate dining room.

Seaside terraces, permit parking and narrow village lanes can each make deliveries slower, so the route for long worktops is best checked at the survey. Water across Kent is hard, so limescale builds up quickly on taps and boiling water taps, and a scale-reducing filter is worth considering.

What rules apply to hob and oven installation in Chatham?

In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.

Listed weatherboarded and timber-framed cottages, oast conversions and homes in conservation areas such as historic Canterbury may need consent for new external vents.

Tips before you start

Ask the Gas Safe engineer for a record of the work and keep it with your home documents, especially if you let a property in Kent.
Keep the hob's cut-out template and installation manual with the worktop plan, so a stone worktop for your kitchen in Kent can be cut correctly by the fabricator.
Before buying an induction hob for your Chatham home, check the rating of the cooker circuit at the consumer unit, or ask for it to be checked at the survey.
If the new hob sits away from the existing gas supply, allow for a new pipe run by a Gas Safe registered engineer.

Questions about hob and oven installation in Chatham

How much does hob and oven installation cost in Chatham?

Hob and oven installation in Chatham typically costs £140 to £340 including VAT for connecting a gas hob to an existing supply, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover all of Chatham?

Yes. We work across Chatham, including the ME4 postcode district, and nearby towns such as Gillingham and Rochester. Book a free survey visit and we will arrange a time that suits you.

Does an induction hob need a new circuit?

Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.

Why does a range cooker need a stability bracket?

Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.

Do built-in ovens need ventilation?

Yes. Built-in ovens release heat, and their installation instructions set the gaps and openings the housing must leave, often at the back or beneath the oven. Blocking them can overheat the surrounding units and the oven's own controls. An oven under the worktop and one in a tall housing have different requirements, so we check the instructions for your model before fitting.

Hob and oven installation near Chatham

The same service is available a short drive from Chatham, including: