Hob and oven installation · Kent
Hob and oven installation in Gillingham
Our hob and oven installation service covers Gillingham and nearby places such as Chatham and Rochester, with a free survey visit and an itemised written quote as the first step.

Why hob and oven installation for a Gillingham home?
A new kitchen layout in Gillingham sometimes puts the hob on an island or another wall, so gas pipework or a cooker circuit has to follow it to the new position.
Many households in Gillingham switch from gas to induction when they refit, which can mean a new cooker circuit and the old gas supply capped off safely. If your home is in Gillingham or close by in Chatham or Rochester, the same survey, quote and fitting process applies.
What is included in the work?
Here is what usually goes into hob and oven installation, adjusted to your Gillingham kitchen after we have measured it:
- Induction and ceramic hobs wired to a suitable cooker circuit and tested
- Built-in single and double ovens fixed into housings with their ventilation gaps
- Old hob or oven disconnected safely and taken away for recycling
- Appliance models checked against worktop cut-outs, oven housings and existing supplies
- Gas supply moved to a new hob position, with pipework tested and made good
- Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
Guide prices for hob and oven installation in Gillingham
The figures below are guide prices for Gillingham, including VAT and adjusted for typical costs across the South East. The fixed price comes after we have measured up. Prices in the South East usually run above the national guide, mainly because labour and parking cost more.
| Typical project | Guide price |
|---|---|
| Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested | £140–£340 |
| Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test | £140–£290 |
| Range cooker installedGas or dual fuel, levelled, stability bracket fitted | £170–£460 |
| New gas pipe run to a new hob positionPipework, testing and making good | £290–£920 |
Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.
Fitting kitchens in older and newer Gillingham homes
Across Kent you will often find Victorian terraces, weatherboarded cottages, 1930s semis and oast house conversions, and each shapes the kitchen differently. Victorian terraces in the Medway towns and along the coast often have a narrow back-addition kitchen, while 1930s semis usually have a small kitchen beside a separate dining room.
Water across Kent is hard, so limescale builds up quickly on taps and boiling water taps, and a scale-reducing filter is worth considering. Seaside terraces, permit parking and narrow village lanes can each make deliveries slower, so the route for long worktops is best checked at the survey.
Building regulations, electrics and gas in Gillingham
In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.
Listed weatherboarded and timber-framed cottages, oast conversions and homes in conservation areas such as historic Canterbury may need consent for new external vents.
Practical advice for Gillingham homeowners
- If you are moving the hob in your Gillingham kitchen, choose the cooker hood at the same time so the extraction and ducting can follow it.
- Keep the hob's cut-out template and installation manual with the worktop plan, so a stone worktop for your kitchen in Kent can be cut correctly by the fabricator.
- If your Gillingham home has an open-flued gas appliance, mention it at the survey, because any new extraction above the hob will need a spillage test.
- Follow the hood and hob manufacturers' instructions on the minimum distance between them; gas hobs usually need more clearance than induction.
Questions about hob and oven installation in Gillingham
How much does hob and oven installation cost in Gillingham?
Hob and oven installation in Gillingham typically costs £140 to £340 including VAT for connecting a gas hob to an existing supply, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.
Do you work near Gillingham as well?
Yes. As well as Gillingham itself, we cover the rest of Kent and nearby towns such as Chatham and Rochester. The process is the same wherever the kitchen is.
Who is allowed to connect a gas hob?
By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.
Why does a range cooker need a stability bracket?
Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.
Does an induction hob need a new circuit?
Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.
Nearby places we cover
Close to Gillingham? We cover these nearby towns too:
- Hob and oven installation in Chatham
- Hob and oven installation in Rochester
- Hob and oven installation in Strood
- Hob and oven installation in Gravesend
- Hob and oven installation in Maidstone
- Hob and oven installation in Sittingbourne
- Hob and oven installation across Kent
