Hob and oven installation in Poole

Who usually needs hob and oven installation in Poole?

Some people in Poole buy a hob and oven online and need them fitted properly, with gas work by a Gas Safe registered engineer and electrics tested and certified.

If the oven in your Poole kitchen has failed, a like-for-like built-in replacement is usually a short job, provided the new model fits the existing housing. We work throughout Poole (BH15) and across the wider Dorset area.

What is included in the work?

The exact scope is agreed after the survey, but a typical job in Poole covers:

Gas supply moved to a new hob position, with pipework tested and made good
Induction and ceramic hobs wired to a suitable cooker circuit and tested
Built-in single and double ovens fixed into housings with their ventilation gaps
Old hob or oven disconnected safely and taken away for recycling
Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer

Hob and oven installation prices in Poole

Use these ranges to plan your budget. They include VAT, reflect costs in the South West, and are firmed up once we have seen your Poole kitchen. For the South West, these ranges are close to the national figures.

Hob and oven installation prices in Poole
Typical project	Guide price
Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested	£120–£310
Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test	£120–£260
Range cooker installedGas or dual fuel, levelled, stability bracket fitted	£150–£410
New gas pipe run to a new hob positionPipework, testing and making good	£260–£820

Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.

What kind of kitchens do we fit in Poole?

Across Dorset you will often find thatched cottages, Victorian and Edwardian villas, 1930s semis and seaside bungalows, and each shapes the kitchen differently. Edwardian villas in Bournemouth often have a separate kitchen and scullery, while 1930s semis and bungalows tend to have a compact room at the back.

Flats in converted villas may have no lift and shared hallways, and narrow village lanes can make delivering long worktops difficult. Most of Dorset has hard water, so limescale on taps, sinks and boiling water taps is common, and a scale-reducing filter can help.

Building regulations, electrics and gas in Poole

In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.

Thatched and listed cottages may need listed building consent for internal changes, and owners of flats in converted houses usually need the freeholder's consent before work starts.

Before you book hob and oven installation in Poole

Confirm whether your new oven sits under the worktop or in a tall housing, because the ventilation and fixing requirements differ between the two.
Measure the gap for a range cooker at worktop height and at floor level, as older walls and thick skirting can narrow the space more than expected.
If your Poole home has an open-flued gas appliance, mention it at the survey, because any new extraction above the hob will need a spillage test.
Measure the oven housing against the installation dimensions, including the ventilation gaps at the back or base that the manufacturer requires.

Questions about hob and oven installation in Poole

How much does hob and oven installation cost in Poole?

For connecting a gas hob to an existing supply, budget around £120 to £310 including VAT in Poole. That reflects typical costs in the South West; we confirm the actual figure in writing once we have measured up.

Which parts of Poole do you work in?

All of them. Our Dorset coverage takes in the whole of Poole, including the BH15 postcode district, as well as surrounding towns such as Bournemouth. If you are unsure, send us your postcode.

Why does a range cooker need a stability bracket?

Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.

Does an induction hob need a new circuit?

Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.

Do built-in ovens need ventilation?

Yes. Built-in ovens release heat, and their installation instructions set the gaps and openings the housing must leave, often at the back or beneath the oven. Blocking them can overheat the surrounding units and the oven's own controls. An oven under the worktop and one in a tall housing have different requirements, so we check the instructions for your model before fitting.

Nearby places we cover

Close to Poole? We cover these nearby towns too: