Hob and oven installation in Sherborne

Who usually needs hob and oven installation in Sherborne?

If the oven in your Sherborne kitchen has failed, a like-for-like built-in replacement is usually a short job, provided the new model fits the existing housing.

Keen cooks across Dorset often choose a range cooker, which needs a level floor, the right clearances to the units and a stability bracket on gas models. Homes right across Sherborne are covered, as are nearby places such as Yeovil, Shaftesbury and the villages in between.

What does the job involve?

After the survey visit we write the scope down. For hob and oven installation in Sherborne it usually covers:

Gas supply moved to a new hob position, with pipework tested and made good
Induction and ceramic hobs wired to a suitable cooker circuit and tested
Appliance models checked against worktop cut-outs, oven housings and existing supplies
Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
Built-in single and double ovens fixed into housings with their ventilation gaps
Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer

Hob and oven installation prices in Sherborne

These guide ranges include VAT at 20% and are adjusted for prices in the South West. We confirm your price in writing after a free survey visit. Costs in the South West sit close to the national guide.

Hob and oven installation prices in Sherborne
Typical project	Guide price
Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested	£120–£310
Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test	£120–£260
Range cooker installedGas or dual fuel, levelled, stability bracket fitted	£150–£410
New gas pipe run to a new hob positionPipework, testing and making good	£260–£820

Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.

What kind of kitchens do we fit in Sherborne?

In and around Sherborne, homes range across thatched cottages, Victorian and Edwardian villas, 1930s semis and seaside bungalows. Edwardian villas in Bournemouth often have a separate kitchen and scullery, while 1930s semis and bungalows tend to have a compact room at the back.

Flats in converted villas may have no lift and shared hallways, and narrow village lanes can make delivering long worktops difficult. Most of Dorset has hard water, so limescale on taps, sinks and boiling water taps is common, and a scale-reducing filter can help.

Regulations for kitchen work in Sherborne

In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.

Thatched and listed cottages may need listed building consent for internal changes, and owners of flats in converted houses usually need the freeholder's consent before work starts.

Before you book hob and oven installation in Sherborne

If your Sherborne home has an open-flued gas appliance, mention it at the survey, because any new extraction above the hob will need a spillage test.
Measure the gap for a range cooker at worktop height and at floor level, as older walls and thick skirting can narrow the space more than expected.
Keep the hob's cut-out template and installation manual with the worktop plan, so a stone worktop for your kitchen in Dorset can be cut correctly by the fabricator.
If the new hob sits away from the existing gas supply, allow for a new pipe run by a Gas Safe registered engineer.

Questions about hob and oven installation in Sherborne

How much does hob and oven installation cost in Sherborne?

Guide prices in Sherborne are about £120 to £310 including VAT for connecting a gas hob to an existing supply. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Which parts of Sherborne do you work in?

All of them. Our Dorset coverage takes in the whole of Sherborne, including the DT9 postcode district, as well as surrounding towns such as Yeovil. If you are unsure, send us your postcode.

Do built-in ovens need ventilation?

Yes. Built-in ovens release heat, and their installation instructions set the gaps and openings the housing must leave, often at the back or beneath the oven. Blocking them can overheat the surrounding units and the oven's own controls. An oven under the worktop and one in a tall housing have different requirements, so we check the instructions for your model before fitting.

Does an induction hob need a new circuit?

Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.

Who is allowed to connect a gas hob?

By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.

Hob and oven installation in neighbouring towns

We also carry out hob and oven installation in these towns near Sherborne: