Hob and oven installation · Dorset
Hob and oven installation in Blandford Forum
Whether your Blandford Forum kitchen is a narrow galley or an open-plan room, hob and oven installation follows the same careful order: survey, written scope, fit and a final check together.

Why do people in Blandford Forum choose hob and oven installation?
If the oven in your Blandford Forum kitchen has failed, a like-for-like built-in replacement is usually a short job, provided the new model fits the existing housing.
Some people in Blandford Forum buy a hob and oven online and need them fitted properly, with gas work by a Gas Safe registered engineer and electrics tested and certified. Blandford Forum sits about 16 miles north-west of Bournemouth, and our Dorset coverage takes in everything in between.
What is included in the work?
Your written quote lists everything included. For hob and oven installation, that normally means:
- Induction and ceramic hobs wired to a suitable cooker circuit and tested
- Appliance models checked against worktop cut-outs, oven housings and existing supplies
- Gas supply moved to a new hob position, with pipework tested and made good
- Old hob or oven disconnected safely and taken away for recycling
- Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
- Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models
Guide prices for hob and oven installation in Blandford Forum
The figures below are guide prices for Blandford Forum, including VAT and adjusted for typical costs across the South West. The fixed price comes after we have measured up. For the South West, these ranges are close to the national figures.
| Typical project | Guide price |
|---|---|
| Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested | £120–£310 |
| Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test | £120–£260 |
| Range cooker installedGas or dual fuel, levelled, stability bracket fitted | £150–£410 |
| New gas pipe run to a new hob positionPipework, testing and making good | £260–£820 |
Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.
Kitchens in homes around Blandford Forum
Across Dorset you will often find thatched cottages, Victorian and Edwardian villas, 1930s semis and seaside bungalows, and each shapes the kitchen differently. Edwardian villas in Bournemouth often have a separate kitchen and scullery, while 1930s semis and bungalows tend to have a compact room at the back.
Flats in converted villas may have no lift and shared hallways, and narrow village lanes can make delivering long worktops difficult. Most of Dorset has hard water, so limescale on taps, sinks and boiling water taps is common, and a scale-reducing filter can help.
Do you need approval for hob and oven installation in Blandford Forum?
In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.
Thatched and listed cottages may need listed building consent for internal changes, and owners of flats in converted houses usually need the freeholder's consent before work starts.
Worth knowing before the fit
- If you are replacing an old cooker with a separate hob and oven in your Blandford Forum kitchen, ask for the gas supply position and condition to be checked first.
- Before buying an induction hob for your Blandford Forum home, check the rating of the cooker circuit at the consumer unit, or ask for it to be checked at the survey.
- Measure the gap for a range cooker at worktop height and at floor level, as older walls and thick skirting can narrow the space more than expected.
- Follow the hood and hob manufacturers' instructions on the minimum distance between them; gas hobs usually need more clearance than induction.
Questions about hob and oven installation in Blandford Forum
How much does hob and oven installation cost in Blandford Forum?
Guide prices in Blandford Forum are about £120 to £310 including VAT for connecting a gas hob to an existing supply. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.
Do you cover all of Blandford Forum?
Yes. We work across Blandford Forum, including the DT11 postcode district, and nearby towns such as Shaftesbury and Poole. Book a free survey visit and we will arrange a time that suits you.
Does an induction hob need a new circuit?
Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.
Who is allowed to connect a gas hob?
By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.
Why does a range cooker need a stability bracket?
Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.
Hob and oven installation in neighbouring towns
Neighbouring towns where we offer hob and oven installation:
- Hob and oven installation in Shaftesbury
- Hob and oven installation in Poole
- Hob and oven installation in Dorchester
- Hob and oven installation in Bournemouth
- Hob and oven installation in Ringwood
- Hob and oven installation in Sherborne
- Hob and oven installation across Dorset
More services for Blandford Forum kitchens
- Integrated appliance installation in Blandford Forum
- Kitchen installation in Blandford Forum
- Replacement kitchen doors in Blandford Forum
- Landlord and rental kitchens in Blandford Forum
- Kitchen underfloor heating in Blandford Forum
- Kitchen strip-out and removal in Blandford Forum
- All kitchen services in Blandford Forum
