Hob and oven installation in Christchurch

Thinking about hob and oven installation in Christchurch?

Keen cooks across Dorset often choose a range cooker, which needs a level floor, the right clearances to the units and a stability bracket on gas models.

If your Christchurch kitchen has an old ceramic hob with a cracked top, an induction replacement may fit the same cut-out, though the circuit still needs checking. Our Dorset coverage reaches every part of Christchurch (BH23) and out towards Bournemouth.

What is included in the work?

The exact scope is agreed after the survey, but a typical job in Christchurch covers:

Appliance models checked against worktop cut-outs, oven housings and existing supplies
Old hob or oven disconnected safely and taken away for recycling
Induction and ceramic hobs wired to a suitable cooker circuit and tested
Built-in single and double ovens fixed into housings with their ventilation gaps
Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
Gas supply moved to a new hob position, with pipework tested and made good

Guide prices for hob and oven installation in Christchurch

Use these ranges to plan your budget. They include VAT, reflect costs in the South West, and are firmed up once we have seen your Christchurch kitchen. For the South West, these ranges are close to the national figures.

Guide prices for hob and oven installation in Christchurch
Typical project	Guide price
Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested	£120–£310
Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test	£120–£260
Range cooker installedGas or dual fuel, levelled, stability bracket fitted	£150–£410
New gas pipe run to a new hob positionPipework, testing and making good	£260–£820

Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.

What kind of kitchens do we fit in Christchurch?

Across Dorset you will often find thatched cottages, Victorian and Edwardian villas, 1930s semis and seaside bungalows, and each shapes the kitchen differently. Edwardian villas in Bournemouth often have a separate kitchen and scullery, while 1930s semis and bungalows tend to have a compact room at the back.

Flats in converted villas may have no lift and shared hallways, and narrow village lanes can make delivering long worktops difficult. Most of Dorset has hard water, so limescale on taps, sinks and boiling water taps is common, and a scale-reducing filter can help.

Building regulations, electrics and gas in Christchurch

In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.

Thatched and listed cottages may need listed building consent for internal changes, and owners of flats in converted houses usually need the freeholder's consent before work starts.

Before you book hob and oven installation in Christchurch

Measure the gap for a range cooker at worktop height and at floor level, as older walls and thick skirting can narrow the space more than expected.
Before buying an induction hob for your Christchurch home, check the rating of the cooker circuit at the consumer unit, or ask for it to be checked at the survey.
If you are replacing an old cooker with a separate hob and oven in your Christchurch kitchen, ask for the gas supply position and condition to be checked first.
Measure the oven housing against the installation dimensions, including the ventilation gaps at the back or base that the manufacturer requires.

Questions about hob and oven installation in Christchurch

How much does hob and oven installation cost in Christchurch?

Hob and oven installation in Christchurch typically costs £120 to £310 including VAT for connecting a gas hob to an existing supply, based on prices in the South West. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover all of Christchurch?

Yes. We work across Christchurch, including the BH23 postcode district, and nearby towns such as Bournemouth and New Milton. Book a free survey visit and we will arrange a time that suits you.

Do built-in ovens need ventilation?

Yes. Built-in ovens release heat, and their installation instructions set the gaps and openings the housing must leave, often at the back or beneath the oven. Blocking them can overheat the surrounding units and the oven's own controls. An oven under the worktop and one in a tall housing have different requirements, so we check the instructions for your model before fitting.

Why does a range cooker need a stability bracket?

Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.

Does an induction hob need a new circuit?

Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.

Also covering nearby towns

Neighbouring towns where we offer hob and oven installation: