Utility room fitting in Yateley

Why do people in Yateley choose utility room fitting?

Larger households in Yateley sharing a lot of laundry often want a stacked washer and dryer, a hanging rail and a clear worktop for folding.

Families in Yateley often want the washing machine out of the kitchen, so the noise, the wet laundry and the drying racks have a room of their own. We work throughout Yateley (GU46) and across the wider Hampshire area.

What does utility room fitting in Yateley include?

The exact scope is agreed after the survey, but a typical job in Yateley covers:

Utility sink and tap plumbed in, with new supplies and waste where none exist
Free survey visit to check water, waste, power and outside wall positions
Extract fan fitted to clear moisture from washing and drying
Base, wall and tall units fitted, levelled and fixed to the wall
Washing machine supply, waste and isolation valve, tested for leaks
Worktop over the washing machine and dryer, supported clear of the appliances

Utility room fitting prices in Yateley

As a starting point for Yateley, these ranges include VAT at 20% and allow for typical labour costs in the South East. Labour in the South East generally costs more than the UK average, which lifts these ranges a little.

Utility room fitting prices in Yateley
Typical project	Guide price
Utility units and worktop fitted (fit only)Three to six units, laminate worktop, panels	£1,400–£3,400
Utility room supplied and fittedUnits, worktop, sink, washer and dryer connections	£3,400–£8,000
New utility plumbing for a sink and washing machineSupplies, waste and valves where none exist	£460–£1,200

Fit-only and supply-and-fit ranges cover units, worktop and standard sink and appliance connections, with new plumbing where none exists as a separate line; extract fans, dryer vents and new circuits are quoted on top. Prices include VAT at 20%.

Fitting kitchens in older and newer Yateley homes

The housing mix across Hampshire includes Victorian terraces, 1930s semis, post-war estate houses and thatched and brick cottages, so no two kitchen fits are quite alike. Terraces in Southampton and Portsmouth often have a narrow back kitchen, while post-war estate houses tend to have a compact rectangular room suited to an L-shape.

Water across Hampshire is mostly hard, largely from chalk sources, so limescale on taps and boiling water taps is common and a filter can help. Dense terraced streets can be very tight for parking, and New Forest lanes and village roads may limit the size of delivery vehicle.

Building regulations, electrics and gas in Yateley

Fitting a utility room needs no planning permission in England, though a new dryer vent through the outside wall of a flat may need planning permission and the freeholder's consent. Adding sockets to an existing circuit is not notifiable, but a new circuit is, under Part P. Approved Document F sets an extract rate of about 30 litres per second for a utility room, so a new fan should be sized to meet it, and if an open-flued boiler shares the room, a Gas Safe registered engineer should carry out a spillage test once a fan is fitted.

Homes within the New Forest or South Downs national parks, listed cottages and conservation areas may need consent for a new extractor vent or alterations to historic features.

Tips before you start

If the utility will be in the garage of your Yateley home, make sure the space stays above freezing in winter for the pipes and machines.
Measure the washer and dryer heights, including any stacking kit, before ordering wall units or shelves to go above them.
Ask for an isolation valve on the washing machine supply that can be reached without pulling the machine out from under the worktop.
A worktop over appliances needs support at each side and a gap above the machines, so they can be slid out for servicing.

Questions about utility room fitting in Yateley

How much does utility room fitting cost in Yateley?

Utility room fitting in Yateley typically costs £1,400 to £3,400 including VAT for fitting three to six utility units and a worktop you have bought, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Can you measure up in Yateley before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Yateley. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Does a condenser or heat pump dryer need an outside vent?

No. Condenser and heat pump dryers do not need an outside vent, so they can go where a vented dryer cannot. They collect water in a container that has to be emptied, or they can be connected to the waste so they drain automatically, which is easy when the dryer sits beside the washing machine. They still give off some warmth, so the space needs air around it. A vented dryer needs a duct to an outside wall.

Does a utility room need an extractor fan?

Yes, in most cases. Washing and drying put a lot of moisture into a small space, so extract ventilation is strongly advised: Approved Document F sets a rate of about 30 litres per second for utility rooms in England and Wales, and the building standards in Scotland and Technical Booklet K in Northern Ireland cover ventilation too. An extract fan ducted outside is the usual answer, with a window helping but not replacing it. A vented dryer needs its own duct as well.

Can a utility room go in a garage or under the stairs?

Often, yes, as long as the space already exists and is usable. In a garage it needs to be dry and protected from frost, with power and a route for water and waste. Under the stairs, check the headroom, the ventilation and whether a door can open fully. We fit units and connect appliances in existing spaces; converting a garage into a habitable room is a separate building project.

Utility room fitting in neighbouring towns

Neighbouring towns where we offer utility room fitting: