Utility room fitting in Crowthorne

Why do people in Crowthorne choose utility room fitting?

If the kitchen in your Berkshire home is a narrow galley, a separate utility can take the appliances that would otherwise crowd the worktop and storage.

Larger households in Crowthorne sharing a lot of laundry often want a stacked washer and dryer, a hanging rail and a clear worktop for folding. Crowthorne sits about 10 miles south-east of Reading, and our Berkshire coverage takes in everything in between.

What is in a typical job?

Here is what usually goes into utility room fitting, adjusted to your Crowthorne kitchen after we have measured it:

Utility sink and tap plumbed in, with new supplies and waste where none exist
A vent to outside for a vented dryer, or a drain hose for condenser models
Free survey visit to check water, waste, power and outside wall positions
Base, wall and tall units fitted, levelled and fixed to the wall
Worktop over the washing machine and dryer, supported clear of the appliances
Extract fan fitted to clear moisture from washing and drying

Utility room fitting prices in Crowthorne

These guide ranges include VAT at 20% and are adjusted for prices in the South East. We confirm your price in writing after a free survey visit. Labour in the South East generally costs more than the UK average, which lifts these ranges a little.

Utility room fitting prices in Crowthorne
Typical project	Guide price
Utility units and worktop fitted (fit only)Three to six units, laminate worktop, panels	£1,400–£3,400
Utility room supplied and fittedUnits, worktop, sink, washer and dryer connections	£3,400–£8,000
New utility plumbing for a sink and washing machineSupplies, waste and valves where none exist	£460–£1,200

Fit-only and supply-and-fit ranges cover units, worktop and standard sink and appliance connections, with new plumbing where none exists as a separate line; extract fans, dryer vents and new circuits are quoted on top. Prices include VAT at 20%.

Local homes and their kitchens

Typical homes in this part of Berkshire include Victorian and Edwardian terraces, 1930s semis, post-war estate houses and new-build town houses. Edwardian terraces often have a long galley running back from the dining room, while newer three-storey town houses usually have a compact kitchen on the ground floor.

Busy town-centre streets and permit parking zones can make unloading slow, so a parking permit or bay suspension may need arranging before delivery day. Expect hard water in most of Berkshire, much of it drawn from chalk, so limescale on taps is common and a boiling water tap benefits from a filter.

Do you need approval for utility room fitting in Crowthorne?

Fitting a utility room needs no planning permission in England, though a new dryer vent through the outside wall of a flat may need planning permission and the freeholder's consent. Adding sockets to an existing circuit is not notifiable, but a new circuit is, under Part P. Approved Document F sets an extract rate of about 30 litres per second for a utility room, so a new fan should be sized to meet it, and if an open-flued boiler shares the room, a Gas Safe registered engineer should carry out a spillage test once a fan is fitted.

A new extractor vent on a street-facing wall can need permission in a conservation area, and listed homes may need consent for internal changes affecting historic features.

Before you book utility room fitting in Crowthorne

Ask for an isolation valve on the washing machine supply that can be reached without pulling the machine out from under the worktop.
If your Berkshire home has an open-flued boiler in the utility, ask for a spillage test by a Gas Safe registered engineer once an extract fan goes in.
Plan the sockets in your Crowthorne utility so each appliance can be switched off at an accessible switch without moving the machine.
A worktop over appliances needs support at each side and a gap above the machines, so they can be slid out for servicing.

Questions about utility room fitting in Crowthorne

How much does utility room fitting cost in Crowthorne?

For fitting three to six utility units and a worktop you have bought, budget around £1,400 to £3,400 including VAT in Crowthorne. That reflects typical costs in the South East; we confirm the actual figure in writing once we have measured up.

Do you work near Crowthorne as well?

Yes. As well as Crowthorne itself, we cover the rest of Berkshire and nearby towns such as Sandhurst and Yateley. The process is the same wherever the kitchen is.

Does a utility room need an extractor fan?

Yes, in most cases. Washing and drying put a lot of moisture into a small space, so extract ventilation is strongly advised: Approved Document F sets a rate of about 30 litres per second for utility rooms in England and Wales, and the building standards in Scotland and Technical Booklet K in Northern Ireland cover ventilation too. An extract fan ducted outside is the usual answer, with a window helping but not replacing it. A vented dryer needs its own duct as well.

Does a condenser or heat pump dryer need an outside vent?

No. Condenser and heat pump dryers do not need an outside vent, so they can go where a vented dryer cannot. They collect water in a container that has to be emptied, or they can be connected to the waste so they drain automatically, which is easy when the dryer sits beside the washing machine. They still give off some warmth, so the space needs air around it. A vented dryer needs a duct to an outside wall.

Can a worktop go over a washing machine and dryer?

Yes, and it is one of the most common utility layouts. The worktop is supported by units, end panels or a rail at each side rather than resting on the machines, with a small gap above them for vibration and so they can be slid out for servicing. Standard front-loading machines usually fit under a standard-height worktop, but we check the appliance heights against the plan first.

Utility room fitting near Crowthorne

Neighbouring towns where we offer utility room fitting: