Utility room fitting · Surrey
Utility room fitting in Camberley
Homeowners and landlords in Camberley can book us for utility room fitting: utility rooms fitted with units, a sink, washer and dryer connections and a worktop over the appliances.
When does utility room fitting make sense in Camberley?
Families in Camberley often want the washing machine out of the kitchen, so the noise, the wet laundry and the drying racks have a room of their own.
Larger households in Camberley sharing a lot of laundry often want a stacked washer and dryer, a hanging rail and a clear worktop for folding. We cover all of Camberley, including the GU15 postcode district, and travel out to neighbouring towns across Surrey.
What does utility room fitting in Camberley include?
Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:
- Extract fan fitted to clear moisture from washing and drying
- Stacking kit fitted where the washer and dryer sit one above the other
- Worktop over the washing machine and dryer, supported clear of the appliances
- Free survey visit to check water, waste, power and outside wall positions
- Base, wall and tall units fitted, levelled and fixed to the wall
- Utility sink and tap plumbed in, with new supplies and waste where none exist
How much does utility room fitting cost in Camberley?
The figures below are guide prices for Camberley, including VAT and adjusted for typical costs across the South East. The fixed price comes after we have measured up. Prices in the South East usually run above the national guide, mainly because labour and parking cost more.
| Typical project | Guide price |
|---|---|
| Utility units and worktop fitted (fit only)Three to six units, laminate worktop, panels | £1,400–£3,400 |
| Utility room supplied and fittedUnits, worktop, sink, washer and dryer connections | £3,400–£8,000 |
| New utility plumbing for a sink and washing machineSupplies, waste and valves where none exist | £460–£1,200 |
Fit-only and supply-and-fit ranges cover units, worktop and standard sink and appliance connections, with new plumbing where none exists as a separate line; extract fans, dryer vents and new circuits are quoted on top. Prices include VAT at 20%.
House types around Camberley and what they mean for a kitchen
In and around Camberley, homes range across 1930s semis, Victorian and Edwardian villas, detached family houses and new-build estates. 1930s semis often have a narrow kitchen beside the dining room, while larger detached houses and Edwardian villas may have room for an island or a separate utility.
Private roads, long drives and village lanes can be awkward for large lorries, while town-centre flats may need lift bookings and parking permits for delivery day. Surrey's water is hard across most of the county, so limescale on taps and boiling water taps is common, and a scale-reducing filter is worth considering.
What rules apply to utility room fitting in Camberley?
Fitting a utility room needs no planning permission in England, though a new dryer vent through the outside wall of a flat may need planning permission and the freeholder's consent. Adding sockets to an existing circuit is not notifiable, but a new circuit is, under Part P. Approved Document F sets an extract rate of about 30 litres per second for a utility room, so a new fan should be sized to meet it, and if an open-flued boiler shares the room, a Gas Safe registered engineer should carry out a spillage test once a fan is fitted.
Listed buildings and conservation areas in older towns and villages may need consent for new vents, and flats in managed blocks usually need the freeholder's consent first.
Tips before you start
- In a Camberley flat, check with the freeholder before a new dryer vent or extract fan is cut through an outside wall.
- Plan the sockets in your Camberley utility so each appliance can be switched off at an accessible switch without moving the machine.
- Ask for an isolation valve on the washing machine supply that can be reached without pulling the machine out from under the worktop.
- If there is no water or waste in the space, new plumbing has to reach it, which is simplest close to an existing kitchen or bathroom.
Questions about utility room fitting in Camberley
How much does utility room fitting cost in Camberley?
Utility room fitting in Camberley typically costs £1,400 to £3,400 including VAT for fitting three to six utility units and a worktop you have bought, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.
Do you work near Camberley as well?
Yes. As well as Camberley itself, we cover the rest of Surrey and nearby towns such as Sandhurst and Farnborough. The process is the same wherever the kitchen is.
Does a condenser or heat pump dryer need an outside vent?
No. Condenser and heat pump dryers do not need an outside vent, so they can go where a vented dryer cannot. They collect water in a container that has to be emptied, or they can be connected to the waste so they drain automatically, which is easy when the dryer sits beside the washing machine. They still give off some warmth, so the space needs air around it. A vented dryer needs a duct to an outside wall.
Does a utility room need an extractor fan?
Yes, in most cases. Washing and drying put a lot of moisture into a small space, so extract ventilation is strongly advised: Approved Document F sets a rate of about 30 litres per second for utility rooms in England and Wales, and the building standards in Scotland and Technical Booklet K in Northern Ireland cover ventilation too. An extract fan ducted outside is the usual answer, with a window helping but not replacing it. A vented dryer needs its own duct as well.
Can a utility room go in a garage or under the stairs?
Often, yes, as long as the space already exists and is usable. In a garage it needs to be dry and protected from frost, with power and a route for water and waste. Under the stairs, check the headroom, the ventilation and whether a door can open fully. We fit units and connect appliances in existing spaces; converting a garage into a habitable room is a separate building project.
Utility room fitting near Camberley
We also carry out utility room fitting in these towns near Camberley:
- Utility room fitting in Sandhurst
- Utility room fitting in Farnborough
- Utility room fitting in Crowthorne
- Utility room fitting in Yateley
- Utility room fitting in Bracknell
- Utility room fitting in Fleet
- Utility room fitting across Surrey