Kitchen Installers UK

Utility room fitting · Berkshire

Utility room fitting in Wokingham

Homeowners and landlords in Wokingham can book us for utility room fitting: utility rooms fitted with units, a sink, washer and dryer connections and a worktop over the appliances.

Guide price£460 to £8,000
Postcodes includeRG40
Timescale1 to 3 days on site
A utility room with a stacked washing machine and dryer, a small sink, a tall cupboard and a laminate worktop

Why do people in Wokingham choose utility room fitting?

Dog owners and keen walkers around Wokingham often ask for a utility with a deep sink, a coat cupboard and somewhere to leave muddy boots and wet jackets.

If your Wokingham home has a back lobby or a rear porch with a little spare width, a few units and a stacked washer and dryer can make it a working utility. We cover all of Wokingham, including the RG40 postcode district, and travel out to neighbouring towns across Berkshire.

What does utility room fitting in Wokingham include?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

  • Free survey visit to check water, waste, power and outside wall positions
  • A vent to outside for a vented dryer, or a drain hose for condenser models
  • Worktop over the washing machine and dryer, supported clear of the appliances
  • Utility sink and tap plumbed in, with new supplies and waste where none exist
  • Base, wall and tall units fitted, levelled and fixed to the wall
  • Washing machine supply, waste and isolation valve, tested for leaks

Guide prices for utility room fitting in Wokingham

Use these ranges to plan your budget. They include VAT, reflect costs in the South East, and are firmed up once we have seen your Wokingham kitchen. Expect costs in the South East to sit somewhat above UK averages, reflecting local labour rates.

Guide prices for utility room fitting in Wokingham
Typical projectGuide price
Utility units and worktop fitted (fit only)Three to six units, laminate worktop, panels£1,400–£3,400
Utility room supplied and fittedUnits, worktop, sink, washer and dryer connections£3,400–£8,000
New utility plumbing for a sink and washing machineSupplies, waste and valves where none exist£460–£1,200

Fit-only and supply-and-fit ranges cover units, worktop and standard sink and appliance connections, with new plumbing where none exists as a separate line; extract fans, dryer vents and new circuits are quoted on top. Prices include VAT at 20%.

Kitchens in homes around Wokingham

Typical homes in this part of Berkshire include Victorian and Edwardian terraces, 1930s semis, post-war estate houses and new-build town houses. Edwardian terraces often have a long galley running back from the dining room, while newer three-storey town houses usually have a compact kitchen on the ground floor.

Busy town-centre streets and permit parking zones can make unloading slow, so a parking permit or bay suspension may need arranging before delivery day. Expect hard water in most of Berkshire, much of it drawn from chalk, so limescale on taps is common and a boiling water tap benefits from a filter.

Do you need approval for utility room fitting in Wokingham?

Fitting a utility room needs no planning permission in England, though a new dryer vent through the outside wall of a flat may need planning permission and the freeholder's consent. Adding sockets to an existing circuit is not notifiable, but a new circuit is, under Part P. Approved Document F sets an extract rate of about 30 litres per second for a utility room, so a new fan should be sized to meet it, and if an open-flued boiler shares the room, a Gas Safe registered engineer should carry out a spillage test once a fan is fitted.

A new extractor vent on a street-facing wall can need permission in a conservation area, and listed homes may need consent for internal changes affecting historic features.

Practical advice for Wokingham homeowners

  • Leave room behind the washing machine for the hoses; pushing it hard against the wall can kink them and stop the water draining properly.
  • If your Berkshire home has an open-flued boiler in the utility, ask for a spillage test by a Gas Safe registered engineer once an extract fan goes in.
  • Before choosing a dryer for your Wokingham utility, check whether there is an outside wall close enough for a short, straight vent duct.
  • A utility in a garage needs to be dry, lit and kept above freezing already; converting the garage itself is a separate building job.

Questions about utility room fitting in Wokingham

How much does utility room fitting cost in Wokingham?

Utility room fitting in Wokingham typically costs £1,400 to £3,400 including VAT for fitting three to six utility units and a worktop you have bought, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover all of Wokingham?

Yes. We work across Wokingham, including the RG40 postcode district, and nearby towns such as Crowthorne and Bracknell. Book a free survey visit and we will arrange a time that suits you.

Can a utility room go in a garage or under the stairs?

Often, yes, as long as the space already exists and is usable. In a garage it needs to be dry and protected from frost, with power and a route for water and waste. Under the stairs, check the headroom, the ventilation and whether a door can open fully. We fit units and connect appliances in existing spaces; converting a garage into a habitable room is a separate building project.

Does a condenser or heat pump dryer need an outside vent?

No. Condenser and heat pump dryers do not need an outside vent, so they can go where a vented dryer cannot. They collect water in a container that has to be emptied, or they can be connected to the waste so they drain automatically, which is easy when the dryer sits beside the washing machine. They still give off some warmth, so the space needs air around it. A vented dryer needs a duct to an outside wall.

Does a utility room need an extractor fan?

Yes, in most cases. Washing and drying put a lot of moisture into a small space, so extract ventilation is strongly advised: Approved Document F sets a rate of about 30 litres per second for utility rooms in England and Wales, and the building standards in Scotland and Technical Booklet K in Northern Ireland cover ventilation too. An extract fan ducted outside is the usual answer, with a window helping but not replacing it. A vented dryer needs its own duct as well.

Utility room fitting near Wokingham

Neighbouring towns where we offer utility room fitting:

Planning more than one job in Wokingham?

Free survey visit

Book a free survey visit in Wokingham

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price