Utility room fitting in Wells

Why utility room fitting for a Wells home?

Dog owners and keen walkers around Wells often ask for a utility with a deep sink, a coat cupboard and somewhere to leave muddy boots and wet jackets.

Landlords letting larger family homes across Somerset sometimes add a utility so tenants have room for laundry, coats and cleaning kit without filling the kitchen with appliances. Our Somerset coverage reaches every part of Wells (BA5) and out towards Shepton Mallet.

What is included in the work?

Your written quote lists everything included. For utility room fitting, that normally means:

Utility sink and tap plumbed in, with new supplies and waste where none exist
Base, wall and tall units fitted, levelled and fixed to the wall
Extract fan fitted to clear moisture from washing and drying
Stacking kit fitted where the washer and dryer sit one above the other
A vent to outside for a vented dryer, or a drain hose for condenser models
Washing machine supply, waste and isolation valve, tested for leaks

Guide prices for utility room fitting in Wells

Use these ranges to plan your budget. They include VAT, reflect costs in the South West, and are firmed up once we have seen your Wells kitchen. Costs in the South West sit close to the national guide.

Guide prices for utility room fitting in Wells
Typical project	Guide price
Utility units and worktop fitted (fit only)Three to six units, laminate worktop, panels	£1,200–£3,100
Utility room supplied and fittedUnits, worktop, sink, washer and dryer connections	£3,100–£7,200
New utility plumbing for a sink and washing machineSupplies, waste and valves where none exist	£410–£1,000

Fit-only and supply-and-fit ranges cover units, worktop and standard sink and appliance connections, with new plumbing where none exists as a separate line; extract fans, dryer vents and new circuits are quoted on top. Prices include VAT at 20%.

Kitchens in homes around Wells

Typical homes in this part of Somerset include Georgian townhouses, Victorian terraces, stone cottages and post-war estate houses. Georgian townhouses in Bath often have kitchens at lower-ground level or in flats on upper floors, while Victorian terraces in Taunton and Yeovil tend to have a narrow back galley.

Somerset's mains water is mostly hard, so limescale on taps and boiling water taps is common, and a filter or softener can help keep them working well. Steep streets and controlled parking in Bath, upper-floor flats without lifts and narrow village lanes can each make delivering worktops slower.

Building regulations, electrics and gas in Wells

Fitting a utility room needs no planning permission in England, though a new dryer vent through the outside wall of a flat may need planning permission and the freeholder's consent. Adding sockets to an existing circuit is not notifiable, but a new circuit is, under Part P. Approved Document F sets an extract rate of about 30 litres per second for a utility room, so a new fan should be sized to meet it, and if an open-flued boiler shares the room, a Gas Safe registered engineer should carry out a spillage test once a fan is fitted.

Bath is a World Heritage city with many listed buildings, and homes in Exmoor National Park or conservation areas may need consent for new vents or internal changes.

Getting the most from your utility room fitting

Measure the washer and dryer heights, including any stacking kit, before ordering wall units or shelves to go above them.
In a Wells flat, check with the freeholder before a new dryer vent or extract fan is cut through an outside wall.
Leave room behind the washing machine for the hoses; pushing it hard against the wall can kink them and stop the water draining properly.
If there is no water or waste in the space, new plumbing has to reach it, which is simplest close to an existing kitchen or bathroom.

Questions about utility room fitting in Wells

How much does utility room fitting cost in Wells?

Guide prices in Wells are about £1,200 to £3,100 including VAT for fitting three to six utility units and a worktop you have bought. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you work near Wells as well?

Yes. As well as Wells itself, we cover the rest of Somerset and nearby towns such as Shepton Mallet and Glastonbury. The process is the same wherever the kitchen is.

Can a utility room go in a garage or under the stairs?

Often, yes, as long as the space already exists and is usable. In a garage it needs to be dry and protected from frost, with power and a route for water and waste. Under the stairs, check the headroom, the ventilation and whether a door can open fully. We fit units and connect appliances in existing spaces; converting a garage into a habitable room is a separate building project.

Can a worktop go over a washing machine and dryer?

Yes, and it is one of the most common utility layouts. The worktop is supported by units, end panels or a rail at each side rather than resting on the machines, with a small gap above them for vibration and so they can be slid out for servicing. Standard front-loading machines usually fit under a standard-height worktop, but we check the appliance heights against the plan first.

Does a condenser or heat pump dryer need an outside vent?

No. Condenser and heat pump dryers do not need an outside vent, so they can go where a vented dryer cannot. They collect water in a container that has to be emptied, or they can be connected to the waste so they drain automatically, which is easy when the dryer sits beside the washing machine. They still give off some warmth, so the space needs air around it. A vented dryer needs a duct to an outside wall.

Utility room fitting in neighbouring towns

Close to Wells? We cover these nearby towns too: