Kitchen underfloor heating in Wells

Thinking about kitchen underfloor heating in Wells?

If your Wells kitchen opens onto a dining area through a wide opening, one heated floor can run across both, with the units left unheated.

In a compact Wells kitchen with no room for a radiator at all, a plinth heater tucked under a base unit can be the simplest answer. We work throughout Wells (BA5) and across the wider Somerset area.

What does the job involve?

Here is what usually goes into kitchen underfloor heating, adjusted to your Wells kitchen after we have measured it:

Insulation boards so the floor responds more quickly when the heating comes on
Electric mats or cables, or wet pipework connected through a manifold
A survey of the subfloor, open floor area and existing heating system
Screed, overlay boards or levelling compound, left to cure before finishes
Door thresholds and plinth heights checked against the new floor build-up
A new circuit or fused spur, plus a thermostat with a floor sensor

Kitchen underfloor heating prices in Wells

As a starting point for Wells, these ranges include VAT at 20% and allow for typical labour costs in the South West. For the South West, these ranges are close to the national figures.

Kitchen underfloor heating prices in Wells
Typical project	Guide price
Electric underfloor heating, kitchen floorMat or cable system, insulation board and thermostat	£620–£1,500
Wet underfloor heating, kitchen floorPipes, manifold, screed or overlay boards	£1,500–£4,100
Plinth heater fitted under a base unitElectric or hydronic, where wall space is short	£260–£620

Guide prices cover the heating system, insulation boards, controls and connection with testing; the floor finish, subfloor repairs, a consumer unit upgrade and any boiler or heat pump changes are priced separately. Prices include VAT at 20%.

Local homes and their kitchens

In and around Wells, homes range across Georgian townhouses, Victorian terraces, stone cottages and post-war estate houses. Georgian townhouses in Bath often have kitchens at lower-ground level or in flats on upper floors, while Victorian terraces in Taunton and Yeovil tend to have a narrow back galley.

Steep streets and controlled parking in Bath, upper-floor flats without lifts and narrow village lanes can each make delivering worktops slower. Somerset's mains water is mostly hard, so limescale on taps and boiling water taps is common, and a filter or softener can help keep them working well.

Building regulations, electrics and gas in Wells

In England, electric underfloor heating needs a supply and a thermostat. A new dedicated circuit is notifiable under Part P and is certified through a competent person scheme or building control, while a fused spur from an existing circuit is not notifiable in England but must still meet BS 7671 and be certified. A wet system is joined to your existing heating, and any work on a gas boiler is for a Gas Safe registered engineer.

Bath is a World Heritage city with many listed buildings, and homes in Exmoor National Park or conservation areas may need consent for new vents or internal changes.

Tips before you start

Allow extra days in your Wells kitchen plan for screed or levelling to cure before the tiler arrives, rather than squeezing it into the fit.
If you have a heat pump or a newer boiler in Somerset, ask whether it can supply a wet floor zone or whether electric is simpler.
Ask for the floor sensor position to be recorded and the thermostat set to the finish's limits before the heating is first used in your Wells kitchen.
Insulation boards under an electric system help the floor warm up more quickly, especially when it is laid over a cold concrete slab.

Questions about kitchen underfloor heating in Wells

How much does kitchen underfloor heating cost in Wells?

Kitchen underfloor heating in Wells typically costs £620 to £1,500 including VAT for electric underfloor heating for a kitchen floor, based on prices in the South West. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover all of Wells?

Yes. We work across Wells, including the BA5 postcode district, and nearby towns such as Shepton Mallet and Glastonbury. Book a free survey visit and we will arrange a time that suits you.

Which floor finishes work with underfloor heating?

Porcelain and ceramic tiles work well, because they conduct heat and cope with temperature changes. Luxury vinyl tiles and engineered wood can also be used, but their manufacturers set a maximum surface temperature, so the thermostat needs a floor sensor and a limit set to match. Thick underlays and rugs reduce the heat reaching the room, so check the finish's installation guidance before ordering.

Will underfloor heating raise my kitchen floor?

Usually, yes. An electric mat with insulation board and tile adhesive adds a modest height, while a wet system in screed adds more. The new level affects door thresholds, the gap under integrated appliances and plinth heights, so it is measured at the survey and the units are set to suit. Low-profile overlay boards can reduce the rise where height is tight.

How soon can a floor be tiled over underfloor heating?

It depends on what the heating is laid in. Thin levelling compounds over electric mats are generally ready far sooner than a traditional sand and cement screed over wet pipes, which needs much longer to dry. The product instructions set the curing time, and the heating should be brought up to temperature gradually, following the system's commissioning guidance, rather than used to dry the floor.

Also covering nearby towns

Neighbouring towns where we offer kitchen underfloor heating: