Replacement kitchen doors in Wells

When do replacement kitchen doors make sense in Wells?

If your Somerset kitchen is older, its cabinets may be in sizes that are no longer standard, so made-to-measure doors let you keep units that are still sound.

Peeling wrapped doors near the oven or kettle are a common reason people in Wells ask about replacements, especially when the units underneath are still fine. Homes right across Wells are covered, as are nearby places such as Shepton Mallet, Glastonbury and the villages in between.

What is included in the work?

The exact scope is agreed after the survey, but a typical job in Wells covers:

Free survey visit to check the carcasses and measure every door and drawer front
Handles or knobs drilled from a template so they sit at a consistent height
Drawer fronts fixed to existing drawer boxes, or new boxes where worn
New soft-close hinges fitted and every door adjusted so the gaps run even
Doors and drawer fronts made to measure or matched to the existing sizes
Matching end panels, plinths, cornice and pelmet cut and fitted

What should you budget for replacement kitchen doors in Wells?

Use these ranges to plan your budget. They include VAT, reflect costs in the South West, and are firmed up once we have seen your Wells kitchen. Prices across the South West are broadly in line with UK averages.

What should you budget for replacement kitchen doors in Wells?
Typical project	Guide price
Doors and drawer fronts supplied and fitted (15–20 doors)Standard ranges, with new hinges and handles	£1,000–£3,100
Bespoke, in-frame or hand-painted doorsMade to measure for your carcasses	£2,100–£5,200
Fitting only, doors you have boughtHanging, adjusting, handles drilled and fitted	£310–£820
Matching end panels, plinths and corniceCut and fitted to suit the new doors	£150–£620

Guide ranges cover doors, drawer fronts, hinges and handles for a typical kitchen of 15 to 20 doors; replacing swollen carcasses, worktops or appliances is priced separately. Prices include VAT at 20%.

What kind of kitchens do we fit in Wells?

The housing mix across Somerset includes Georgian townhouses, Victorian terraces, stone cottages and post-war estate houses, so no two kitchen fits are quite alike. Georgian townhouses in Bath often have kitchens at lower-ground level or in flats on upper floors, while Victorian terraces in Taunton and Yeovil tend to have a narrow back galley.

Somerset's mains water is mostly hard, so limescale on taps and boiling water taps is common, and a filter or softener can help keep them working well. Steep streets and controlled parking in Bath, upper-floor flats without lifts and narrow village lanes can each make delivering worktops slower.

What rules apply to replacement kitchen doors in Wells?

Replacing kitchen doors needs no planning permission or Building Regulations approval in England, because nothing structural, electrical or plumbed changes. The exception is a listed building, where original fitted cupboards or joinery may need listed building consent before they are altered. If you add plinth or cornice lighting at the same time, the wiring must meet BS 7671, and a new circuit for it would be notifiable under Part P.

Bath is a World Heritage city with many listed buildings, and homes in Exmoor National Park or conservation areas may need consent for new vents or internal changes.

Before you book replacement kitchen doors in Wells

Ask whether the cornice and pelmet will be replaced too, as old ones left on a Wells kitchen with new doors often show a colour mismatch.
Keep one old door until the new ones are fitted, so sizes and hinge positions can be checked if anything does not line up.
Allow for delivery time on made-to-measure doors; your kitchen stays usable while you wait, as nothing comes off until they arrive.
A new kitchen makes more sense if the carcasses are damaged, the layout does not work, or the sink and hob need to move.

Questions about replacement kitchen doors in Wells

How much do replacement kitchen doors cost in Wells?

For 15 to 20 doors and drawer fronts, supplied and fitted, budget around £1,000 to £3,100 including VAT in Wells. That reflects typical costs in the South West; we confirm the actual figure in writing once we have measured up.

Can you measure up in Wells before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Wells. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Are new hinges and handles fitted with the doors?

Yes, normally. Old hinges are often worn or set for the old doors, so new soft-close hinges are fitted and adjusted so the doors close quietly and the gaps run even. Handles are drilled from a template so every one sits at the same height and distance from the edge. If you would like to reuse your existing handles, the new doors are drilled to suit them.

Can I change to a completely different door style?

Usually, yes. Slab, shaker and painted doors can all go on standard carcasses if the sizes and hinge positions suit. An in-frame look is more involved, because the doors sit inside a frame built onto the front of the units, so it costs more. A true handleless kitchen uses rails built into the carcasses, so with a door change that look is imitated with edge-profiled doors instead.

Can new doors be fitted to my existing kitchen units?

Usually, yes, as long as the carcasses are sound. We measure every door and drawer front at the survey and check the hinge positions, because sizes vary between makers and older kitchens often use sizes that are no longer standard. Doors are then made to measure or matched to your units, drilled for new hinges and hung so the gaps line up across each run.

Replacement kitchen doors near Wells

The same service is available a short drive from Wells, including: