Utility room fitting · Somerset
Utility room fitting in Shepton Mallet
Need utility room fitting in Shepton Mallet? Tell us about the kitchen and we will arrange a free, no-obligation survey to see what the job really involves.
When does utility room fitting make sense in Shepton Mallet?
Larger households in Shepton Mallet sharing a lot of laundry often want a stacked washer and dryer, a hanging rail and a clear worktop for folding.
If the kitchen in your Somerset home is a narrow galley, a separate utility can take the appliances that would otherwise crowd the worktop and storage. Our Somerset coverage reaches every part of Shepton Mallet (BA4) and out towards Wells.
What does the job involve?
The exact scope is agreed after the survey, but a typical job in Shepton Mallet covers:
- Washing machine supply, waste and isolation valve, tested for leaks
- A vent to outside for a vented dryer, or a drain hose for condenser models
- Worktop over the washing machine and dryer, supported clear of the appliances
- Utility sink and tap plumbed in, with new supplies and waste where none exist
- Base, wall and tall units fitted, levelled and fixed to the wall
- Free survey visit to check water, waste, power and outside wall positions
How much does utility room fitting cost in Shepton Mallet?
As a starting point for Shepton Mallet, these ranges include VAT at 20% and allow for typical labour costs in the South West. Prices across the South West are broadly in line with UK averages.
| Typical project | Guide price |
|---|---|
| Utility units and worktop fitted (fit only)Three to six units, laminate worktop, panels | £1,200–£3,100 |
| Utility room supplied and fittedUnits, worktop, sink, washer and dryer connections | £3,100–£7,200 |
| New utility plumbing for a sink and washing machineSupplies, waste and valves where none exist | £410–£1,000 |
Fit-only and supply-and-fit ranges cover units, worktop and standard sink and appliance connections, with new plumbing where none exists as a separate line; extract fans, dryer vents and new circuits are quoted on top. Prices include VAT at 20%.
Fitting kitchens in older and newer Shepton Mallet homes
In and around Shepton Mallet, homes range across Georgian townhouses, Victorian terraces, stone cottages and post-war estate houses. Georgian townhouses in Bath often have kitchens at lower-ground level or in flats on upper floors, while Victorian terraces in Taunton and Yeovil tend to have a narrow back galley.
Steep streets and controlled parking in Bath, upper-floor flats without lifts and narrow village lanes can each make delivering worktops slower. Somerset's mains water is mostly hard, so limescale on taps and boiling water taps is common, and a filter or softener can help keep them working well.
What rules apply to utility room fitting in Shepton Mallet?
Fitting a utility room needs no planning permission in England, though a new dryer vent through the outside wall of a flat may need planning permission and the freeholder's consent. Adding sockets to an existing circuit is not notifiable, but a new circuit is, under Part P. Approved Document F sets an extract rate of about 30 litres per second for a utility room, so a new fan should be sized to meet it, and if an open-flued boiler shares the room, a Gas Safe registered engineer should carry out a spillage test once a fan is fitted.
Bath is a World Heritage city with many listed buildings, and homes in Exmoor National Park or conservation areas may need consent for new vents or internal changes.
Practical advice for Shepton Mallet homeowners
- Leave room behind the washing machine for the hoses; pushing it hard against the wall can kink them and stop the water draining properly.
- If the utility will be in the garage of your Shepton Mallet home, make sure the space stays above freezing in winter for the pipes and machines.
- If your Somerset home has an open-flued boiler in the utility, ask for a spillage test by a Gas Safe registered engineer once an extract fan goes in.
- Check which dryer you have: a vented dryer needs a duct to an outside wall, while condenser and heat pump dryers need emptying or a drain.
Questions about utility room fitting in Shepton Mallet
How much does utility room fitting cost in Shepton Mallet?
Guide prices in Shepton Mallet are about £1,200 to £3,100 including VAT for fitting three to six utility units and a worktop you have bought. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.
Do you work near Shepton Mallet as well?
Yes. As well as Shepton Mallet itself, we cover the rest of Somerset and nearby towns such as Wells and Glastonbury. The process is the same wherever the kitchen is.
Can a utility room go in a garage or under the stairs?
Often, yes, as long as the space already exists and is usable. In a garage it needs to be dry and protected from frost, with power and a route for water and waste. Under the stairs, check the headroom, the ventilation and whether a door can open fully. We fit units and connect appliances in existing spaces; converting a garage into a habitable room is a separate building project.
Does a utility room need an extractor fan?
Yes, in most cases. Washing and drying put a lot of moisture into a small space, so extract ventilation is strongly advised: Approved Document F sets a rate of about 30 litres per second for utility rooms in England and Wales, and the building standards in Scotland and Technical Booklet K in Northern Ireland cover ventilation too. An extract fan ducted outside is the usual answer, with a window helping but not replacing it. A vented dryer needs its own duct as well.
Does a condenser or heat pump dryer need an outside vent?
No. Condenser and heat pump dryers do not need an outside vent, so they can go where a vented dryer cannot. They collect water in a container that has to be emptied, or they can be connected to the waste so they drain automatically, which is easy when the dryer sits beside the washing machine. They still give off some warmth, so the space needs air around it. A vented dryer needs a duct to an outside wall.
Also covering nearby towns
We also carry out utility room fitting in these towns near Shepton Mallet:
- Utility room fitting in Wells
- Utility room fitting in Glastonbury
- Utility room fitting in Frome
- Utility room fitting in Bath
- Utility room fitting in Keynsham
- Utility room fitting in Warminster
- Utility room fitting across Somerset
More services for Shepton Mallet kitchens
- Kitchen strip-out and removal in Shepton Mallet
- Kitchen underfloor heating in Shepton Mallet
- Kitchen island installation in Shepton Mallet
- Integrated appliance installation in Shepton Mallet
- Supply and fit kitchens in Shepton Mallet
- Kitchen refurbishment in Shepton Mallet
- All kitchen services in Shepton Mallet