Utility room fitting · England
Utility room fitting in Gloucestershire
Homeowners and landlords across Gloucestershire can book us for utility room fitting: utility rooms fitted with units, a sink, washer and dryer connections and a worktop over the appliances.
When does utility room fitting make sense in Gloucestershire?
When a new kitchen is being planned in Gloucestershire, moving the laundry to a utility often makes room for deep drawers or a dishwasher in the kitchen itself.
In a Gloucestershire house where the garage is already used for storage rather than the car, some people fit a run of units and the laundry along one wall.
What does utility room fitting in Gloucestershire include?
Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:
- Free survey visit to check water, waste, power and outside wall positions
- Base, wall and tall units fitted, levelled and fixed to the wall
- Worktop over the washing machine and dryer, supported clear of the appliances
- Washing machine supply, waste and isolation valve, tested for leaks
- A vent to outside for a vented dryer, or a drain hose for condenser models
- Stacking kit fitted where the washer and dryer sit one above the other
- Utility sink and tap plumbed in, with new supplies and waste where none exist
- Extract fan fitted to clear moisture from washing and drying
How much does utility room fitting cost in Gloucestershire?
Use these ranges to plan your budget. They include VAT, reflect costs in the South West, and are firmed up once we have seen your Gloucestershire kitchen. Prices across the South West are broadly in line with UK averages.
| Typical project | Guide price |
|---|---|
| Utility units and worktop fitted (fit only)Three to six units, laminate worktop, panels | £1,200–£3,100 |
| Utility room supplied and fittedUnits, worktop, sink, washer and dryer connections | £3,100–£7,200 |
| New utility plumbing for a sink and washing machineSupplies, waste and valves where none exist | £410–£1,000 |
Fit-only and supply-and-fit ranges cover units, worktop and standard sink and appliance connections, with new plumbing where none exists as a separate line; extract fans, dryer vents and new circuits are quoted on top. Prices include VAT at 20%.
Kitchens in homes across Gloucestershire
The housing mix across Gloucestershire includes cotswold stone cottages, Regency townhouses, Victorian terraces and post-war estate houses, so no two kitchen fits are quite alike. Cotswold stone cottages often have a small kitchen in a rear extension, while Regency townhouses in Cheltenham may have a long kitchen at garden level or in a former basement.
Hard water is the norm across most of Gloucestershire, so expect limescale on taps and appliances and think about a filter for a boiling water tap. Stone villages with narrow lanes and limited parking can make deliveries slow, and townhouse flats over several floors may mean carrying units up stairs.
If your home is a Cotswold stone cottage, the walls are often thick and uneven, so tall units and worktops need careful scribing. Regency and Victorian townhouses sometimes have kitchens on lower floors, where damp, low ceilings and the route for waste pipes can shape the layout.
Rules for utility room fitting in Gloucestershire
Fitting a utility room needs no planning permission in England, though a new dryer vent through the outside wall of a flat may need planning permission and the freeholder's consent. Adding sockets to an existing circuit is not notifiable, but a new circuit is, under Part P. Approved Document F sets an extract rate of about 30 litres per second for a utility room, so a new fan should be sized to meet it, and if an open-flued boiler shares the room, a Gas Safe registered engineer should carry out a spillage test once a fan is fitted.
Listed stone cottages, Cheltenham's Regency terraces and homes in conservation areas may need consent before new vents are cut or historic features are removed.
Before you start
- Stacking the dryer on the washing machine saves width, but it needs a stacking kit that suits both machines and enough height for the pair.
- Under-stairs spaces can take a washer and dryer, but check the headroom, the ventilation and room to pull machines out before committing.
- A worktop over appliances needs support at each side and a gap above the machines, so they can be slid out for servicing.
- A utility in a garage needs to be dry, lit and kept above freezing already; converting the garage itself is a separate building job.
- In a Gloucestershire flat, check with the freeholder before a new dryer vent or extract fan is cut through an outside wall.
- If your Gloucestershire home has an open-flued boiler in the utility, ask for a spillage test by a Gas Safe registered engineer once an extract fan goes in.
Questions about utility room fitting in Gloucestershire
How much does utility room fitting cost in Gloucestershire?
Utility room fitting in Gloucestershire typically costs £1,200 to £3,100 including VAT for fitting three to six utility units and a worktop you have bought, based on prices in the South West. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.
Do you cover the whole of Gloucestershire?
Yes. We carry out utility room fitting across Gloucestershire, including Gloucester, Cheltenham, Stroud and Kingswood. Every job starts with a free survey visit and an itemised written quote.
Can a utility room go in a garage or under the stairs?
Often, yes, as long as the space already exists and is usable. In a garage it needs to be dry and protected from frost, with power and a route for water and waste. Under the stairs, check the headroom, the ventilation and whether a door can open fully. We fit units and connect appliances in existing spaces; converting a garage into a habitable room is a separate building project.
Can a worktop go over a washing machine and dryer?
Yes, and it is one of the most common utility layouts. The worktop is supported by units, end panels or a rail at each side rather than resting on the machines, with a small gap above them for vibration and so they can be slid out for servicing. Standard front-loading machines usually fit under a standard-height worktop, but we check the appliance heights against the plan first.
Does a utility room need an extractor fan?
Yes, in most cases. Washing and drying put a lot of moisture into a small space, so extract ventilation is strongly advised: Approved Document F sets a rate of about 30 litres per second for utility rooms in England and Wales, and the building standards in Scotland and Technical Booklet K in Northern Ireland cover ventilation too. An extract fan ducted outside is the usual answer, with a window helping but not replacing it. A vented dryer needs its own duct as well.
Utility room fitting in towns across Gloucestershire
Choose a town for local guide prices and postcode coverage:
- Utility room fitting in Gloucester
- Utility room fitting in Cheltenham
- Utility room fitting in Stroud
- Utility room fitting in Kingswood
- Utility room fitting in Yate
- Utility room fitting in Tewkesbury
- Utility room fitting in Cirencester
- Utility room fitting in Lydney