Kitchen Installers UK

Utility room fitting · Gloucestershire

Utility room fitting in Tewkesbury

We take on utility room fitting in Tewkesbury and the surrounding GL20 postcodes, working to a written scope so you know exactly what is included before anyone starts.

Guide price£410 to £7,200
Postcodes includeGL20
Timescale1 to 3 days on site
A utility room with a stacked washing machine and dryer, a small sink, a tall cupboard and a laminate worktop

Who usually needs utility room fitting in Tewkesbury?

If the kitchen in your Gloucestershire home is a narrow galley, a separate utility can take the appliances that would otherwise crowd the worktop and storage.

Landlords letting larger family homes across Gloucestershire sometimes add a utility so tenants have room for laundry, coats and cleaning kit without filling the kitchen with appliances. We cover all of Tewkesbury, including the GL20 postcode district, and travel out to neighbouring towns across Gloucestershire.

What is in a typical job?

Here is what usually goes into utility room fitting, adjusted to your Tewkesbury kitchen after we have measured it:

  • Free survey visit to check water, waste, power and outside wall positions
  • A vent to outside for a vented dryer, or a drain hose for condenser models
  • Washing machine supply, waste and isolation valve, tested for leaks
  • Extract fan fitted to clear moisture from washing and drying
  • Stacking kit fitted where the washer and dryer sit one above the other
  • Worktop over the washing machine and dryer, supported clear of the appliances

What does utility room fitting cost in Tewkesbury?

Typical utility room fitting prices for homes in Tewkesbury, including VAT and adjusted for the South West. Your own figure depends on the size of the kitchen, the layout and what is moving. Costs in the South West sit close to the national guide.

What does utility room fitting cost in Tewkesbury?
Typical projectGuide price
Utility units and worktop fitted (fit only)Three to six units, laminate worktop, panels£1,200–£3,100
Utility room supplied and fittedUnits, worktop, sink, washer and dryer connections£3,100–£7,200
New utility plumbing for a sink and washing machineSupplies, waste and valves where none exist£410–£1,000

Fit-only and supply-and-fit ranges cover units, worktop and standard sink and appliance connections, with new plumbing where none exists as a separate line; extract fans, dryer vents and new circuits are quoted on top. Prices include VAT at 20%.

Kitchens in homes around Tewkesbury

Typical homes in this part of Gloucestershire include cotswold stone cottages, Regency townhouses, Victorian terraces and post-war estate houses. Cotswold stone cottages often have a small kitchen in a rear extension, while Regency townhouses in Cheltenham may have a long kitchen at garden level or in a former basement.

Hard water is the norm across most of Gloucestershire, so expect limescale on taps and appliances and think about a filter for a boiling water tap. Stone villages with narrow lanes and limited parking can make deliveries slow, and townhouse flats over several floors may mean carrying units up stairs.

Regulations for kitchen work in Tewkesbury

Fitting a utility room needs no planning permission in England, though a new dryer vent through the outside wall of a flat may need planning permission and the freeholder's consent. Adding sockets to an existing circuit is not notifiable, but a new circuit is, under Part P. Approved Document F sets an extract rate of about 30 litres per second for a utility room, so a new fan should be sized to meet it, and if an open-flued boiler shares the room, a Gas Safe registered engineer should carry out a spillage test once a fan is fitted.

Listed stone cottages, Cheltenham's Regency terraces and homes in conservation areas may need consent before new vents are cut or historic features are removed.

Practical advice for Tewkesbury homeowners

  • Ask for an isolation valve on the washing machine supply that can be reached without pulling the machine out from under the worktop.
  • If the utility will be in the garage of your Tewkesbury home, make sure the space stays above freezing in winter for the pipes and machines.
  • Leave room behind the washing machine for the hoses; pushing it hard against the wall can kink them and stop the water draining properly.
  • Check which dryer you have: a vented dryer needs a duct to an outside wall, while condenser and heat pump dryers need emptying or a drain.

Questions about utility room fitting in Tewkesbury

How much does utility room fitting cost in Tewkesbury?

Utility room fitting in Tewkesbury typically costs £1,200 to £3,100 including VAT for fitting three to six utility units and a worktop you have bought, based on prices in the South West. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Can you measure up in Tewkesbury before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Tewkesbury. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Can a utility room go in a garage or under the stairs?

Often, yes, as long as the space already exists and is usable. In a garage it needs to be dry and protected from frost, with power and a route for water and waste. Under the stairs, check the headroom, the ventilation and whether a door can open fully. We fit units and connect appliances in existing spaces; converting a garage into a habitable room is a separate building project.

Can a worktop go over a washing machine and dryer?

Yes, and it is one of the most common utility layouts. The worktop is supported by units, end panels or a rail at each side rather than resting on the machines, with a small gap above them for vibration and so they can be slid out for servicing. Standard front-loading machines usually fit under a standard-height worktop, but we check the appliance heights against the plan first.

Does a condenser or heat pump dryer need an outside vent?

No. Condenser and heat pump dryers do not need an outside vent, so they can go where a vented dryer cannot. They collect water in a container that has to be emptied, or they can be connected to the waste so they drain automatically, which is easy when the dryer sits beside the washing machine. They still give off some warmth, so the space needs air around it. A vented dryer needs a duct to an outside wall.

Nearby places we cover

We also carry out utility room fitting in these towns near Tewkesbury:

More services for Tewkesbury kitchens

Free survey visit

Book a free survey visit in Tewkesbury

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price