Utility room fitting in Stroud

Thinking about utility room fitting in Stroud?

If the kitchen in your Gloucestershire home is a narrow galley, a separate utility can take the appliances that would otherwise crowd the worktop and storage.

Landlords letting larger family homes across Gloucestershire sometimes add a utility so tenants have room for laundry, coats and cleaning kit without filling the kitchen with appliances. If your home is in Stroud or close by in Gloucester or Cirencester, the same survey, quote and fitting process applies.

What does utility room fitting in Stroud include?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Worktop over the washing machine and dryer, supported clear of the appliances
Extract fan fitted to clear moisture from washing and drying
Free survey visit to check water, waste, power and outside wall positions
A vent to outside for a vented dryer, or a drain hose for condenser models
Stacking kit fitted where the washer and dryer sit one above the other
Washing machine supply, waste and isolation valve, tested for leaks

What does utility room fitting cost in Stroud?

Use these ranges to plan your budget. They include VAT, reflect costs in the South West, and are firmed up once we have seen your Stroud kitchen. Prices across the South West are broadly in line with UK averages.

What does utility room fitting cost in Stroud?
Typical project	Guide price
Utility units and worktop fitted (fit only)Three to six units, laminate worktop, panels	£1,200–£3,100
Utility room supplied and fittedUnits, worktop, sink, washer and dryer connections	£3,100–£7,200
New utility plumbing for a sink and washing machineSupplies, waste and valves where none exist	£410–£1,000

Fit-only and supply-and-fit ranges cover units, worktop and standard sink and appliance connections, with new plumbing where none exists as a separate line; extract fans, dryer vents and new circuits are quoted on top. Prices include VAT at 20%.

Local homes and their kitchens

You will find cotswold stone cottages, Regency townhouses, Victorian terraces and post-war estate houses throughout Gloucestershire. Cotswold stone cottages often have a small kitchen in a rear extension, while Regency townhouses in Cheltenham may have a long kitchen at garden level or in a former basement.

Hard water is the norm across most of Gloucestershire, so expect limescale on taps and appliances and think about a filter for a boiling water tap. Stone villages with narrow lanes and limited parking can make deliveries slow, and townhouse flats over several floors may mean carrying units up stairs.

Regulations for kitchen work in Stroud

Fitting a utility room needs no planning permission in England, though a new dryer vent through the outside wall of a flat may need planning permission and the freeholder's consent. Adding sockets to an existing circuit is not notifiable, but a new circuit is, under Part P. Approved Document F sets an extract rate of about 30 litres per second for a utility room, so a new fan should be sized to meet it, and if an open-flued boiler shares the room, a Gas Safe registered engineer should carry out a spillage test once a fan is fitted.

Listed stone cottages, Cheltenham's Regency terraces and homes in conservation areas may need consent before new vents are cut or historic features are removed.

Tips before you start

Plan the sockets in your Stroud utility so each appliance can be switched off at an accessible switch without moving the machine.
If your Gloucestershire home has an open-flued boiler in the utility, ask for a spillage test by a Gas Safe registered engineer once an extract fan goes in.
Before choosing a dryer for your Stroud utility, check whether there is an outside wall close enough for a short, straight vent duct.
A utility in a garage needs to be dry, lit and kept above freezing already; converting the garage itself is a separate building job.

Questions about utility room fitting in Stroud

How much does utility room fitting cost in Stroud?

Utility room fitting in Stroud typically costs £1,200 to £3,100 including VAT for fitting three to six utility units and a worktop you have bought, based on prices in the South West. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Which parts of Stroud do you work in?

All of them. Our Gloucestershire coverage takes in the whole of Stroud, including the GL5 postcode district, as well as surrounding towns such as Gloucester. If you are unsure, send us your postcode.

Can a worktop go over a washing machine and dryer?

Yes, and it is one of the most common utility layouts. The worktop is supported by units, end panels or a rail at each side rather than resting on the machines, with a small gap above them for vibration and so they can be slid out for servicing. Standard front-loading machines usually fit under a standard-height worktop, but we check the appliance heights against the plan first.

Does a utility room need an extractor fan?

Yes, in most cases. Washing and drying put a lot of moisture into a small space, so extract ventilation is strongly advised: Approved Document F sets a rate of about 30 litres per second for utility rooms in England and Wales, and the building standards in Scotland and Technical Booklet K in Northern Ireland cover ventilation too. An extract fan ducted outside is the usual answer, with a window helping but not replacing it. A vented dryer needs its own duct as well.

Can a utility room go in a garage or under the stairs?

Often, yes, as long as the space already exists and is usable. In a garage it needs to be dry and protected from frost, with power and a route for water and waste. Under the stairs, check the headroom, the ventilation and whether a door can open fully. We fit units and connect appliances in existing spaces; converting a garage into a habitable room is a separate building project.

Utility room fitting in neighbouring towns

Close to Stroud? We cover these nearby towns too: