Utility room fitting · Gloucestershire
Utility room fitting in Lydney
From the survey to handover, utility room fitting in Lydney is run by us as one job, with the fitters and trades booked in the right order.
When does utility room fitting make sense in Lydney?
Families in Lydney often want the washing machine out of the kitchen, so the noise, the wet laundry and the drying racks have a room of their own.
If the kitchen in your Gloucestershire home is a narrow galley, a separate utility can take the appliances that would otherwise crowd the worktop and storage. If your home is in Lydney or close by in Yate or Stroud, the same survey, quote and fitting process applies.
What we cover for utility room fitting in Lydney
Here is what usually goes into utility room fitting, adjusted to your Lydney kitchen after we have measured it:
- Stacking kit fitted where the washer and dryer sit one above the other
- Utility sink and tap plumbed in, with new supplies and waste where none exist
- A vent to outside for a vented dryer, or a drain hose for condenser models
- Extract fan fitted to clear moisture from washing and drying
- Free survey visit to check water, waste, power and outside wall positions
- Base, wall and tall units fitted, levelled and fixed to the wall
How much does utility room fitting cost in Lydney?
As a starting point for Lydney, these ranges include VAT at 20% and allow for typical labour costs in the South West. Prices across the South West are broadly in line with UK averages.
| Typical project | Guide price |
|---|---|
| Utility units and worktop fitted (fit only)Three to six units, laminate worktop, panels | £1,200–£3,100 |
| Utility room supplied and fittedUnits, worktop, sink, washer and dryer connections | £3,100–£7,200 |
| New utility plumbing for a sink and washing machineSupplies, waste and valves where none exist | £410–£1,000 |
Fit-only and supply-and-fit ranges cover units, worktop and standard sink and appliance connections, with new plumbing where none exists as a separate line; extract fans, dryer vents and new circuits are quoted on top. Prices include VAT at 20%.
What kind of kitchens do we fit in Lydney?
Across Gloucestershire you will often find cotswold stone cottages, Regency townhouses, Victorian terraces and post-war estate houses, and each shapes the kitchen differently. Cotswold stone cottages often have a small kitchen in a rear extension, while Regency townhouses in Cheltenham may have a long kitchen at garden level or in a former basement.
Hard water is the norm across most of Gloucestershire, so expect limescale on taps and appliances and think about a filter for a boiling water tap. Stone villages with narrow lanes and limited parking can make deliveries slow, and townhouse flats over several floors may mean carrying units up stairs.
What rules apply to utility room fitting in Lydney?
Fitting a utility room needs no planning permission in England, though a new dryer vent through the outside wall of a flat may need planning permission and the freeholder's consent. Adding sockets to an existing circuit is not notifiable, but a new circuit is, under Part P. Approved Document F sets an extract rate of about 30 litres per second for a utility room, so a new fan should be sized to meet it, and if an open-flued boiler shares the room, a Gas Safe registered engineer should carry out a spillage test once a fan is fitted.
Listed stone cottages, Cheltenham's Regency terraces and homes in conservation areas may need consent before new vents are cut or historic features are removed.
Worth knowing before the fit
- Plan the sockets in your Lydney utility so each appliance can be switched off at an accessible switch without moving the machine.
- Measure the washer and dryer heights, including any stacking kit, before ordering wall units or shelves to go above them.
- Ask for an isolation valve on the washing machine supply that can be reached without pulling the machine out from under the worktop.
- If there is no water or waste in the space, new plumbing has to reach it, which is simplest close to an existing kitchen or bathroom.
Questions about utility room fitting in Lydney
How much does utility room fitting cost in Lydney?
Guide prices in Lydney are about £1,200 to £3,100 including VAT for fitting three to six utility units and a worktop you have bought. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.
Can you measure up in Lydney before quoting?
Yes. Every quote starts with a free, no-obligation survey visit to your home in Lydney. We measure the room, check the walls, floor and service positions, then send an itemised written quote.
Can a utility room go in a garage or under the stairs?
Often, yes, as long as the space already exists and is usable. In a garage it needs to be dry and protected from frost, with power and a route for water and waste. Under the stairs, check the headroom, the ventilation and whether a door can open fully. We fit units and connect appliances in existing spaces; converting a garage into a habitable room is a separate building project.
Can a worktop go over a washing machine and dryer?
Yes, and it is one of the most common utility layouts. The worktop is supported by units, end panels or a rail at each side rather than resting on the machines, with a small gap above them for vibration and so they can be slid out for servicing. Standard front-loading machines usually fit under a standard-height worktop, but we check the appliance heights against the plan first.
Does a condenser or heat pump dryer need an outside vent?
No. Condenser and heat pump dryers do not need an outside vent, so they can go where a vented dryer cannot. They collect water in a container that has to be emptied, or they can be connected to the waste so they drain automatically, which is easy when the dryer sits beside the washing machine. They still give off some warmth, so the space needs air around it. A vented dryer needs a duct to an outside wall.
Utility room fitting near Lydney
We also carry out utility room fitting in these towns near Lydney:
- Utility room fitting in Yate
- Utility room fitting in Stroud
- Utility room fitting in Gloucester
- Utility room fitting in Kingswood
- Utility room fitting in Portishead
- Utility room fitting in Malmesbury
- Utility room fitting across Gloucestershire