Replacement kitchen doors in Frome

Why do people in Frome choose replacement kitchen doors?

If you have bought a Frome home where the kitchen layout works but the colour does not, new doors and handles can change the look in a day or two.

If your Somerset kitchen has worktops you still like but dated doors, new fronts in a different style or colour let you keep the surfaces and change the rest. We cover all of Frome, including the BA11 postcode district, and travel out to neighbouring towns across Somerset.

What does the job involve?

Here is what usually goes into replacement kitchen doors, adjusted to your Frome kitchen after we have measured it:

Doors and drawer fronts made to measure or matched to the existing sizes
Hinge holes drilled to line up with the positions on your carcasses
New soft-close hinges fitted and every door adjusted so the gaps run even
Matching end panels, plinths, cornice and pelmet cut and fitted
Free survey visit to check the carcasses and measure every door and drawer front
New fronts fixed to integrated appliances with their door-fixing kits

Guide prices for replacement kitchen doors in Frome

As a starting point for Frome, these ranges include VAT at 20% and allow for typical labour costs in the South West. For the South West, these ranges are close to the national figures.

Guide prices for replacement kitchen doors in Frome
Typical project	Guide price
Doors and drawer fronts supplied and fitted (15–20 doors)Standard ranges, with new hinges and handles	£1,000–£3,100
Bespoke, in-frame or hand-painted doorsMade to measure for your carcasses	£2,100–£5,200
Fitting only, doors you have boughtHanging, adjusting, handles drilled and fitted	£310–£820
Matching end panels, plinths and corniceCut and fitted to suit the new doors	£150–£620

Guide ranges cover doors, drawer fronts, hinges and handles for a typical kitchen of 15 to 20 doors; replacing swollen carcasses, worktops or appliances is priced separately. Prices include VAT at 20%.

House types around Frome and what they mean for a kitchen

In and around Frome, homes range across Georgian townhouses, Victorian terraces, stone cottages and post-war estate houses. Georgian townhouses in Bath often have kitchens at lower-ground level or in flats on upper floors, while Victorian terraces in Taunton and Yeovil tend to have a narrow back galley.

Somerset's mains water is mostly hard, so limescale on taps and boiling water taps is common, and a filter or softener can help keep them working well. Steep streets and controlled parking in Bath, upper-floor flats without lifts and narrow village lanes can each make delivering worktops slower.

What rules apply to replacement kitchen doors in Frome?

Replacing kitchen doors needs no planning permission or Building Regulations approval in England, because nothing structural, electrical or plumbed changes. The exception is a listed building, where original fitted cupboards or joinery may need listed building consent before they are altered. If you add plinth or cornice lighting at the same time, the wiring must meet BS 7671, and a new circuit for it would be notifiable under Part P.

Bath is a World Heritage city with many listed buildings, and homes in Exmoor National Park or conservation areas may need consent for new vents or internal changes.

Getting the most from your replacement kitchen doors

Count every door, drawer front, end panel and plinth before asking for prices, including integrated appliance doors and panels at the ends of runs.
Open the sink cupboard in your Frome kitchen and press the base; soft or swollen board means that unit needs replacing before new doors.
Choose handles after the doors, holding samples against the new colour in your Frome kitchen's daylight before anything is drilled.
A new kitchen makes more sense if the carcasses are damaged, the layout does not work, or the sink and hob need to move.

Questions about replacement kitchen doors in Frome

How much do replacement kitchen doors cost in Frome?

For 15 to 20 doors and drawer fronts, supplied and fitted, budget around £1,000 to £3,100 including VAT in Frome. That reflects typical costs in the South West; we confirm the actual figure in writing once we have measured up.

Which parts of Frome do you work in?

All of them. Our Somerset coverage takes in the whole of Frome, including the BA11 postcode district, as well as surrounding towns such as Warminster. If you are unsure, send us your postcode.

Are new hinges and handles fitted with the doors?

Yes, normally. Old hinges are often worn or set for the old doors, so new soft-close hinges are fitted and adjusted so the doors close quietly and the gaps run even. Handles are drilled from a template so every one sits at the same height and distance from the edge. If you would like to reuse your existing handles, the new doors are drilled to suit them.

What if some of my kitchen units are water damaged?

Damaged units are replaced before the new doors go on, because swollen chipboard does not recover. The sink base is the usual problem, from slow leaks at the trap or tap, followed by units beside the dishwasher. We check every carcass at the survey, look for the cause of any leak, and price replacement units as a separate line so you can see the cost clearly.

Can I change to a completely different door style?

Usually, yes. Slab, shaker and painted doors can all go on standard carcasses if the sizes and hinge positions suit. An in-frame look is more involved, because the doors sit inside a frame built onto the front of the units, so it costs more. A true handleless kitchen uses rails built into the carcasses, so with a door change that look is imitated with edge-profiled doors instead.

Replacement kitchen doors near Frome

Close to Frome? We cover these nearby towns too: