Replacement kitchen doors in Shepton Mallet

Is replacement kitchen doors right for your Shepton Mallet kitchen?

Peeling wrapped doors near the oven or kettle are a common reason people in Shepton Mallet ask about replacements, especially when the units underneath are still fine.

Some Shepton Mallet households getting ready to sell want the kitchen to look fresher in the photographs without the cost and mess of taking it out. If your home is in Shepton Mallet or close by in Wells or Glastonbury, the same survey, quote and fitting process applies.

What is in a typical job?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Drawer fronts fixed to existing drawer boxes, or new boxes where worn
Doors and drawer fronts made to measure or matched to the existing sizes
New soft-close hinges fitted and every door adjusted so the gaps run even
Free survey visit to check the carcasses and measure every door and drawer front
Matching end panels, plinths, cornice and pelmet cut and fitted
Hinge holes drilled to line up with the positions on your carcasses

What should you budget for replacement kitchen doors in Shepton Mallet?

As a starting point for Shepton Mallet, these ranges include VAT at 20% and allow for typical labour costs in the South West. Costs in the South West sit close to the national guide.

What should you budget for replacement kitchen doors in Shepton Mallet?
Typical project	Guide price
Doors and drawer fronts supplied and fitted (15–20 doors)Standard ranges, with new hinges and handles	£1,000–£3,100
Bespoke, in-frame or hand-painted doorsMade to measure for your carcasses	£2,100–£5,200
Fitting only, doors you have boughtHanging, adjusting, handles drilled and fitted	£310–£820
Matching end panels, plinths and corniceCut and fitted to suit the new doors	£150–£620

Guide ranges cover doors, drawer fronts, hinges and handles for a typical kitchen of 15 to 20 doors; replacing swollen carcasses, worktops or appliances is priced separately. Prices include VAT at 20%.

What kind of kitchens do we fit in Shepton Mallet?

Across Somerset you will often find Georgian townhouses, Victorian terraces, stone cottages and post-war estate houses, and each shapes the kitchen differently. Georgian townhouses in Bath often have kitchens at lower-ground level or in flats on upper floors, while Victorian terraces in Taunton and Yeovil tend to have a narrow back galley.

Steep streets and controlled parking in Bath, upper-floor flats without lifts and narrow village lanes can each make delivering worktops slower. Somerset's mains water is mostly hard, so limescale on taps and boiling water taps is common, and a filter or softener can help keep them working well.

Building regulations, electrics and gas in Shepton Mallet

Replacing kitchen doors needs no planning permission or Building Regulations approval in England, because nothing structural, electrical or plumbed changes. The exception is a listed building, where original fitted cupboards or joinery may need listed building consent before they are altered. If you add plinth or cornice lighting at the same time, the wiring must meet BS 7671, and a new circuit for it would be notifiable under Part P.

Bath is a World Heritage city with many listed buildings, and homes in Exmoor National Park or conservation areas may need consent for new vents or internal changes.

Practical advice for Shepton Mallet homeowners

If you let out a Shepton Mallet property, new doors can often be fitted between tenancies in a day or two once they have been delivered.
Ask whether the cornice and pelmet will be replaced too, as old ones left on a Shepton Mallet kitchen with new doors often show a colour mismatch.
Keep one old door until the new ones are fitted, so sizes and hinge positions can be checked if anything does not line up.
If the worktops are also worn, consider replacing them in the same visit rather than fitting new doors beside tired surfaces.

Questions about replacement kitchen doors in Shepton Mallet

How much do replacement kitchen doors cost in Shepton Mallet?

For 15 to 20 doors and drawer fronts, supplied and fitted, budget around £1,000 to £3,100 including VAT in Shepton Mallet. That reflects typical costs in the South West; we confirm the actual figure in writing once we have measured up.

Which parts of Shepton Mallet do you work in?

All of them. Our Somerset coverage takes in the whole of Shepton Mallet, including the BA4 postcode district, as well as surrounding towns such as Wells. If you are unsure, send us your postcode.

What if some of my kitchen units are water damaged?

Damaged units are replaced before the new doors go on, because swollen chipboard does not recover. The sink base is the usual problem, from slow leaks at the trap or tap, followed by units beside the dishwasher. We check every carcass at the survey, look for the cause of any leak, and price replacement units as a separate line so you can see the cost clearly.

Are new hinges and handles fitted with the doors?

Yes, normally. Old hinges are often worn or set for the old doors, so new soft-close hinges are fitted and adjusted so the doors close quietly and the gaps run even. Handles are drilled from a template so every one sits at the same height and distance from the edge. If you would like to reuse your existing handles, the new doors are drilled to suit them.

Can I change to a completely different door style?

Usually, yes. Slab, shaker and painted doors can all go on standard carcasses if the sizes and hinge positions suit. An in-frame look is more involved, because the doors sit inside a frame built onto the front of the units, so it costs more. A true handleless kitchen uses rails built into the carcasses, so with a door change that look is imitated with edge-profiled doors instead.

Replacement kitchen doors near Shepton Mallet

Neighbouring towns where we offer replacement kitchen doors: