Cooker hood installation in Wells

Thinking about cooker hood installation in Wells?

If your Wells house has thick solid walls, core drilling a neat hole for the duct takes the right equipment and careful positioning of the outside grille.

People in flats across Somerset sometimes rely on recirculating hoods because an outside vent needs consent from the building's owners, and want to know what else improves ventilation. We work throughout Wells (BA5) and across the wider Somerset area.

What does cooker hood installation in Wells include?

After the survey visit we write the scope down. For cooker hood installation in Wells it usually covers:

Recirculating hoods fitted with carbon filters, and their limits explained
Core drilling through the outside wall and an external grille fitted and sealed
Island and ceiling hoods fixed into the ceiling structure by two people
Short, straight runs of rigid ducting wherever the route allows
Survey of the hob position, duct route, outside wall and any open-flued appliance
Power supply connected by an electrician and tested to BS 7671

What should you budget for cooker hood installation in Wells?

As a starting point for Wells, these ranges include VAT at 20% and allow for typical labour costs in the South West. For the South West, these ranges are close to the national figures.

What should you budget for cooker hood installation in Wells?
Typical project	Guide price
Like-for-like cooker hood swapSame position and ducting	£120–£250
New ducted hood through an outside wallCore drilling, ducting run and external grille	£310–£930
Island or ceiling hood installedTwo-person install, fixings to the ceiling structure	£310–£650
Recirculating hood fittedNo ducting; carbon filters need replacing	£120–£310

Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.

House types around Wells and what they mean for a kitchen

Across Somerset you will often find Georgian townhouses, Victorian terraces, stone cottages and post-war estate houses, and each shapes the kitchen differently. Georgian townhouses in Bath often have kitchens at lower-ground level or in flats on upper floors, while Victorian terraces in Taunton and Yeovil tend to have a narrow back galley.

Steep streets and controlled parking in Bath, upper-floor flats without lifts and narrow village lanes can each make delivering worktops slower. Somerset's mains water is mostly hard, so limescale on taps and boiling water taps is common, and a filter or softener can help keep them working well.

What rules apply to cooker hood installation in Wells?

In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.

Bath is a World Heritage city with many listed buildings, and homes in Exmoor National Park or conservation areas may need consent for new vents or internal changes.

Getting the most from your cooker hood installation

Check whether your Wells home has an open-flued boiler or gas fire, and mention it at the survey so a spillage test can be planned.
If you live in a flat in Somerset, ask the freeholder, factor or managing agent about outside vents before you buy a ducted hood.
For an island hood in your Wells kitchen, settle the hood position before the ceiling is boarded, so timber supports can be added in the right place.
Keep the duct run short and straight with rigid ducting, because every bend and extra metre of flexible hose reduces how much air the hood moves.

Questions about cooker hood installation in Wells

How much does cooker hood installation cost in Wells?

Cooker hood installation in Wells typically costs £120 to £250 including VAT for a like-for-like cooker hood swap, based on prices in the South West. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover all of Wells?

Yes. We work across Wells, including the BA5 postcode district, and nearby towns such as Shepton Mallet and Glastonbury. Book a free survey visit and we will arrange a time that suits you.

Why might a cooker hood need a spillage test?

Because a hood pulling air out of a room can draw fumes back down the flue of an open-flued gas appliance, such as some older boilers or gas fires. Where the kitchen, or a room open to it, has one, a Gas Safe registered engineer should carry out a spillage test with the hood running at full speed. Room-sealed boilers are not affected in the same way.

How high should a cooker hood be above the hob?

At least the minimum distance given by the manufacturers. Both the hood and the hob instructions set a minimum gap between them, and where they differ the greater figure should be used. Gas hobs usually need more clearance than induction. A hood fitted too low is a fire risk, while one fitted much higher than recommended captures less steam.

Can a ducted cooker hood be fitted in a flat?

Often, but check consents first. A new vent through the outside wall of a flat may need planning permission and the freeholder's written consent, and some leases do not allow it at all. Where an outside vent is not possible, a recirculating hood can be fitted, with a separate extract fan or other ventilation dealing with moisture. Listed buildings may also need listed building consent.

Nearby places we cover

Close to Wells? We cover these nearby towns too: