Flat-pack kitchen fitting in Shepton Mallet

Why flat-pack kitchen fitting for a Shepton Mallet home?

A Shepton Mallet kitchen with uneven floors or walls that are out of true needs the same care whatever the units, and flat-pack carcasses gain most from being squared before they are scribed.

If you have bought a flat-pack kitchen for your Shepton Mallet home to keep costs down, careful assembly makes sure that saving never shows in the finished kitchen. Our Somerset coverage reaches every part of Shepton Mallet (BA4) and out towards Wells.

What does the job involve?

Here is what usually goes into flat-pack kitchen fitting, adjusted to your Shepton Mallet kitchen after we have measured it:

Panels, plinths, sink, tap and appliance connections to existing points
Free survey visit to check the plan, the boxes and the room
Base units levelled on adjustable legs and fixed to the wall and to each other
Drawer boxes, runners and hinges assembled, fitted and adjusted to line up
Wall units hung on hanging rails or brackets fixed securely into the wall
Back panels fitted fully into their grooves or fixed as the instructions require

What should you budget for flat-pack kitchen fitting in Shepton Mallet?

These guide ranges include VAT at 20% and are adjusted for prices in the South West. We confirm your price in writing after a free survey visit. Prices across the South West are broadly in line with UK averages.

What should you budget for flat-pack kitchen fitting in Shepton Mallet?
Typical project	Guide price
Small flat-pack kitchen, built and fittedCarcasses assembled on site, then fitted as a rigid kitchen would be	£1,900–£3,100
Medium flat-pack kitchen, built and fittedAs above	£2,900–£4,300
Large flat-pack kitchen with tall units, built and fittedAs above	£4,100–£5,700

Flat-pack prices include assembling the carcasses on site and fitting units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved services, tiling and flooring are extra. Prices include VAT at 20%.

Fitting kitchens in older and newer Shepton Mallet homes

Across Somerset you will often find Georgian townhouses, Victorian terraces, stone cottages and post-war estate houses, and each shapes the kitchen differently. Georgian townhouses in Bath often have kitchens at lower-ground level or in flats on upper floors, while Victorian terraces in Taunton and Yeovil tend to have a narrow back galley.

Steep streets and controlled parking in Bath, upper-floor flats without lifts and narrow village lanes can each make delivering worktops slower. Somerset's mains water is mostly hard, so limescale on taps and boiling water taps is common, and a filter or softener can help keep them working well.

Regulations for kitchen work in Shepton Mallet

Assembling and fitting a flat-pack kitchen needs no planning permission in England; if the building is listed, listed building consent may be needed where the work affects its character. Electrics must meet BS 7671: extra sockets or spurs on an existing kitchen circuit are not notifiable, but a new cooker or induction circuit is notifiable under Part P. Gas hobs are connected only by Gas Safe registered engineers, and any new cooker hood should meet Approved Document F.

Bath is a World Heritage city with many listed buildings, and homes in Exmoor National Park or conservation areas may need consent for new vents or internal changes.

Worth knowing before the fit

If your Shepton Mallet home has plasterboard walls, mention it when you book the survey, as wall units may need extra fixings or timber behind the board.
Ask your supplier for a small bag of spare cams, dowels and hinge screws, so a lost fitting does not mean waiting days for a tiny part.
Keep every instruction leaflet; each one shows the cam, dowel and hinge positions for that unit and saves time during assembly.
Ask whether a sink base mat is included, and make sure every cut edge around the sink, waste and pipe holes is sealed.

Questions about flat-pack kitchen fitting in Shepton Mallet

How much does flat-pack kitchen fitting cost in Shepton Mallet?

Flat-pack kitchen fitting in Shepton Mallet typically costs £1,900 to £3,100 including VAT for a small flat-pack kitchen, built and fitted, based on prices in the South West. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Which parts of Shepton Mallet do you work in?

All of them. Our Somerset coverage takes in the whole of Shepton Mallet, including the BA4 postcode district, as well as surrounding towns such as Wells. If you are unsure, send us your postcode.

How do you make sure flat-pack cabinets are square?

Each carcass is built on a flat surface and measured corner to corner before its back panel goes in; equal diagonals mean it is square. The back panel then holds that shape. Units are checked again once they stand on their legs and are fixed together, because a carcass that is even slightly out of square shows up later as doors that never quite line up.

Are flat-pack wall units strong enough once they are hung?

Yes, when they are assembled and hung correctly. Wall units carry their load through the back panel and the hanging fixings, so the back must be fully fitted and the rail or brackets fixed into the wall with fixings that suit its construction. Plasterboard walls may need timber noggins or specialist fixings behind the board. We check the wall types at the survey and plan the fixings before the fit.

How do you protect a flat-pack sink unit from water?

Mainly by sealing. Cut edges of board near the sink, including the holes for pipes and the waste, are sealed before the unit is fitted, and the worktop cut-out is sealed before the sink goes in. A sink base mat adds a second layer of protection against drips. Isolation valves on the supplies also mean that a later leak can be shut off quickly.

Nearby places we cover

Neighbouring towns where we offer flat-pack kitchen fitting: