Kitchen underfloor heating in Felling

Why do people in Felling choose kitchen underfloor heating?

In a compact Felling kitchen with no room for a radiator at all, a plinth heater tucked under a base unit can be the simplest answer.

Many Felling kitchens lose their only radiator wall to a new run of units, and underfloor heating keeps the room warm without giving up storage. Homes right across Felling are covered, as are nearby places such as Gateshead, Newcastle upon Tyne and the villages in between.

What is included in the work?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

A survey of the subfloor, open floor area and existing heating system
Plinth heaters fitted under base units where wall space for a radiator is short
Electric mats or cables, or wet pipework connected through a manifold
Door thresholds and plinth heights checked against the new floor build-up
Screed, overlay boards or levelling compound, left to cure before finishes
A heating layout drawn to the kitchen plan, clear of units and appliances

What should you budget for kitchen underfloor heating in Felling?

The figures below are guide prices for Felling, including VAT and adjusted for typical costs across the North East. The fixed price comes after we have measured up. Prices in the North East usually come in below the national guide, as labour rates are lower than in the South East.

What should you budget for kitchen underfloor heating in Felling?
Typical project	Guide price
Electric underfloor heating, kitchen floorMat or cable system, insulation board and thermostat	£540–£1,400
Wet underfloor heating, kitchen floorPipes, manifold, screed or overlay boards	£1,400–£3,600
Plinth heater fitted under a base unitElectric or hydronic, where wall space is short	£220–£540

Guide prices cover the heating system, insulation boards, controls and connection with testing; the floor finish, subfloor repairs, a consumer unit upgrade and any boiler or heat pump changes are priced separately. Prices include VAT at 20%.

What kind of kitchens do we fit in Felling?

Across Tyne and Wear you will often find tyneside flats, Victorian terraces, 1930s semis and post-war council-built houses, and each shapes the kitchen differently. Tyneside flats often have a narrow kitchen in the rear offshoot, while 1930s semis and ex-council houses tend to have a small square kitchen at the back.

Hardness varies across Tyne and Wear, from fairly soft around Newcastle to harder in parts of Sunderland, so check with your supplier before choosing a filter. Back lanes behind terraced streets can help deliveries, but upper Tyneside flats have their own internal stair, so long worktops need careful handling.

Do you need approval for kitchen underfloor heating in Felling?

In England, electric underfloor heating needs a supply and a thermostat. A new dedicated circuit is notifiable under Part P and is certified through a competent person scheme or building control, while a fused spur from an existing circuit is not notifiable in England but must still meet BS 7671 and be certified. A wet system is joined to your existing heating, and any work on a gas boiler is for a Gas Safe registered engineer.

In conservation areas and listed buildings, such as parts of central Newcastle and Tynemouth, a new external vent or changes to historic features may need consent.

Practical advice for Felling homeowners

If your Felling home has a suspended timber floor, ask how the heating will be supported and insulated between the joists.
If you have a heat pump or a newer boiler in Tyne and Wear, ask whether it can supply a wet floor zone or whether electric is simpler.
Allow extra days in your Felling kitchen plan for screed or levelling to cure before the tiler arrives, rather than squeezing it into the fit.
Heat is laid only across the open floor, not under fitted units or appliances, so the heated area is smaller than the room.

Questions about kitchen underfloor heating in Felling

How much does kitchen underfloor heating cost in Felling?

Guide prices in Felling are about £540 to £1,400 including VAT for electric underfloor heating for a kitchen floor. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you cover all of Felling?

Yes. We work across Felling, including the NE10 postcode district, and nearby towns such as Gateshead and Newcastle upon Tyne. Book a free survey visit and we will arrange a time that suits you.

Is electric or wet underfloor heating better for a kitchen?

It depends on the floor and the heating you already have. Electric mats are thin, quick to lay and suit a single kitchen floor during a refit. Wet systems use warm water from the boiler or heat pump, need more floor depth and a manifold, and make more sense when a larger area, such as a whole kitchen-diner floor, is being relaid at the same time.

How soon can a floor be tiled over underfloor heating?

It depends on what the heating is laid in. Thin levelling compounds over electric mats are generally ready far sooner than a traditional sand and cement screed over wet pipes, which needs much longer to dry. The product instructions set the curing time, and the heating should be brought up to temperature gradually, following the system's commissioning guidance, rather than used to dry the floor.

Will underfloor heating raise my kitchen floor?

Usually, yes. An electric mat with insulation board and tile adhesive adds a modest height, while a wet system in screed adds more. The new level affects door thresholds, the gap under integrated appliances and plinth heights, so it is measured at the survey and the units are set to suit. Low-profile overlay boards can reduce the rise where height is tight.

Kitchen underfloor heating in neighbouring towns

Neighbouring towns where we offer kitchen underfloor heating: