Hob and oven installation in Felling

Thinking about hob and oven installation in Felling?

Keen cooks across Tyne and Wear often choose a range cooker, which needs a level floor, the right clearances to the units and a stability bracket on gas models.

A new kitchen layout in Felling sometimes puts the hob on an island or another wall, so gas pipework or a cooker circuit has to follow it to the new position. Homes right across Felling are covered, as are nearby places such as Gateshead, Newcastle upon Tyne and the villages in between.

What is in a typical job?

Your written quote lists everything included. For hob and oven installation, that normally means:

Induction and ceramic hobs wired to a suitable cooker circuit and tested
Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models
Old hob or oven disconnected safely and taken away for recycling
Gas supply moved to a new hob position, with pipework tested and made good

What does hob and oven installation cost in Felling?

The figures below are guide prices for Felling, including VAT and adjusted for typical costs across the North East. The fixed price comes after we have measured up. Prices in the North East usually come in below the national guide, as labour rates are lower than in the South East.

What does hob and oven installation cost in Felling?
Typical project	Guide price
Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested	£110–£270
Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test	£110–£220
Range cooker installedGas or dual fuel, levelled, stability bracket fitted	£140–£360
New gas pipe run to a new hob positionPipework, testing and making good	£220–£720

Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.

Local homes and their kitchens

Across Tyne and Wear you will often find tyneside flats, Victorian terraces, 1930s semis and post-war council-built houses, and each shapes the kitchen differently. Tyneside flats often have a narrow kitchen in the rear offshoot, while 1930s semis and ex-council houses tend to have a small square kitchen at the back.

Back lanes behind terraced streets can help deliveries, but upper Tyneside flats have their own internal stair, so long worktops need careful handling. Hardness varies across Tyne and Wear, from fairly soft around Newcastle to harder in parts of Sunderland, so check with your supplier before choosing a filter.

What rules apply to hob and oven installation in Felling?

In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.

In conservation areas and listed buildings, such as parts of central Newcastle and Tynemouth, a new external vent or changes to historic features may need consent.

Tips before you start

Keep the hob's cut-out template and installation manual with the worktop plan, so a stone worktop for your kitchen in Tyne and Wear can be cut correctly by the fabricator.
Ask the Gas Safe engineer for a record of the work and keep it with your home documents, especially if you let a property in Tyne and Wear.
Confirm whether your new oven sits under the worktop or in a tall housing, because the ventilation and fixing requirements differ between the two.
If the new hob sits away from the existing gas supply, allow for a new pipe run by a Gas Safe registered engineer.

Questions about hob and oven installation in Felling

How much does hob and oven installation cost in Felling?

Hob and oven installation in Felling typically costs £110 to £270 including VAT for connecting a gas hob to an existing supply, based on prices in the North East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you work near Felling as well?

Yes. As well as Felling itself, we cover the rest of Tyne and Wear and nearby towns such as Gateshead and Newcastle upon Tyne. The process is the same wherever the kitchen is.

Why does a range cooker need a stability bracket?

Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.

Does an induction hob need a new circuit?

Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.

Who is allowed to connect a gas hob?

By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.

Hob and oven installation near Felling

We also carry out hob and oven installation in these towns near Felling: