Sink and tap installation in Wimbledon

Why sink and tap installation for a Wimbledon home?

Landlords in Greater London often swap tired sinks and taps between tenancies, choosing hard-wearing finishes and accessible valves so that later repairs are quick and cheap.

A Wimbledon kitchen with the sink in an awkward corner may work better with the sink under the window or on an island, which means new supplies and a new waste run. Our Greater London coverage reaches every part of Wimbledon (SW19) and out towards Morden.

What we cover for sink and tap installation in Wimbledon

After the survey visit we write the scope down. For sink and tap installation in Wimbledon it usually covers:

New sink fitted, sealed and connected to the existing supplies and waste
Every joint leak tested, with water flow and drainage checked before handover
Boiling water tap fitted with its tank, filter and power supply in the cupboard
Inset sink cut-outs made on site in laminate and wood worktops
Ceramic farmhouse-style sinks set on a suitable supporting base unit and sealed
Sink moved to a new position with new supply and waste runs

Guide prices for sink and tap installation in Wimbledon

The figures below are guide prices for Wimbledon, including VAT and adjusted for typical costs across London. The fixed price comes after we have measured up. Labour in London generally costs more than the UK average, which lifts these ranges a little.

Guide prices for sink and tap installation in Wimbledon
Typical project	Guide price
Sink and tap plumbed inIsolation valves, waste and trap	£260–£520
Boiling water tap installedTank under the sink, filter and power supply	£200–£460
Sink moved to a new positionNew supplies and waste run	£520–£1,300
Undermount sink in a stone worktopCut-out and polishing are done by the stone fabricator	Priced with the worktop

Guide ranges cover labour and fittings such as valves, tails and wastes; the sink and tap themselves are extra, and undermount cut-outs in stone are priced with the worktop by the fabricator. Prices include VAT at 20%.

Local homes and their kitchens

Typical homes in this part of Greater London include Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in. Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day.

What rules apply to sink and tap installation in Wimbledon?

Replacing a sink and tap needs no approval in England, but the plumbing should meet the Water Supply (Water Fittings) Regulations 1999, including isolation valves and backflow protection. Connecting to an existing waste is routine, while a new connection to an underground drain involves building control. A new spur for a boiling water tap on an existing kitchen circuit is not notifiable under Part P, but it must meet BS 7671.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Practical advice for Wimbledon homeowners

Check the tap's hole size against the sink or worktop before ordering, as some taps need a larger hole than an existing sink provides.
Ask for the dishwasher and washing machine hoses to be routed so they cannot kink behind the units once the appliances are pushed back into place.
Before buying a boiling water tap for your Wimbledon home, check its minimum water pressure and how much space it needs in the sink cupboard.
Keep isolation valves reachable under the sink, so the tap can be serviced or a leak stopped without turning off the whole house supply.

Questions about sink and tap installation in Wimbledon

How much does sink and tap installation cost in Wimbledon?

Guide prices in Wimbledon are about £260 to £520 including VAT for plumbing in a new sink and tap. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Which parts of Wimbledon do you work in?

All of them. Our Greater London coverage takes in the whole of Wimbledon, including the SW19 postcode district, as well as surrounding towns such as Morden. If you are unsure, send us your postcode.

Can a dishwasher and washing machine drain through the sink waste?

Yes, in most kitchens. The sink trap can take an appliance connection on a spigot, or a separate standpipe can be fitted. The appliance hose needs to rise to the height its manufacturer specifies before it drops to the waste, so dirty water cannot siphon back. Two appliances can usually share a double-spigot trap, which we plan with the sink.

What do I need for a boiling water tap?

A boiling water tap needs a tank in the cupboard under the sink, usually a socket or fused spur to power it, and often a filter, particularly where the water is hard. Some models have a minimum water pressure, so check yours before buying. The tap also needs a correctly sized hole in the sink or worktop and enough clear cupboard space for the tank and pipework.

What is the difference between an inset and an undermount sink?

An inset sink drops into a cut-out from above, with its rim resting on the worktop, and suits laminate, wood and stone. An undermount sink is fixed beneath the worktop so the edge of the cut-out is exposed, which usually calls for a solid, water-resistant material such as stone or solid surface. Undermount cut-outs in stone are cut and polished by the fabricator.

Sink and tap installation near Wimbledon

We also carry out sink and tap installation in these towns near Wimbledon: