Sink and tap installation in Morden

Thinking about sink and tap installation in Morden?

Landlords in Greater London often swap tired sinks and taps between tenancies, choosing hard-wearing finishes and accessible valves so that later repairs are quick and cheap.

Some Morden households choose a deep ceramic farmhouse-style sink for a new kitchen and need the base unit and worktop planned around its weight and size. If your home is in Morden or close by in Mitcham or Wimbledon, the same survey, quote and fitting process applies.

What does the job involve?

Your written quote lists everything included. For sink and tap installation, that normally means:

Waste, overflow and trap fitted, with dishwasher and washing machine waste connections
New sink fitted, sealed and connected to the existing supplies and waste
Isolation valves on the hot and cold supplies, with flexible tap tails connected
Sink moved to a new position with new supply and waste runs
Ceramic farmhouse-style sinks set on a suitable supporting base unit and sealed
Every joint leak tested, with water flow and drainage checked before handover

What does sink and tap installation cost in Morden?

The figures below are guide prices for Morden, including VAT and adjusted for typical costs across London. The fixed price comes after we have measured up. Labour in London generally costs more than the UK average, which lifts these ranges a little.

What does sink and tap installation cost in Morden?
Typical project	Guide price
Sink and tap plumbed inIsolation valves, waste and trap	£260–£520
Boiling water tap installedTank under the sink, filter and power supply	£200–£460
Sink moved to a new positionNew supplies and waste run	£520–£1,300
Undermount sink in a stone worktopCut-out and polishing are done by the stone fabricator	Priced with the worktop

Guide ranges cover labour and fittings such as valves, tails and wastes; the sink and tap themselves are extra, and undermount cut-outs in stone are priced with the worktop by the fabricator. Prices include VAT at 20%.

Local homes and their kitchens

In and around Morden, homes range across Victorian and Edwardian terraces, conversion flats, mansion block flats and 1930s semis. Victorian terraces often have a narrow galley beside the side return, while conversion flats and mansion blocks usually fit the kitchen into a small room or along one living-room wall.

London's mains water is hard, so limescale builds quickly on taps and boiling water taps, and a scale-reducing filter is worth planning in. Permit parking, red routes and flats without lifts are common, so parking suspensions, stair carries and lift bookings may need arranging before delivery day.

Building regulations, electrics and gas in Morden

Replacing a sink and tap needs no approval in England, but the plumbing should meet the Water Supply (Water Fittings) Regulations 1999, including isolation valves and backflow protection. Connecting to an existing waste is routine, while a new connection to an underground drain involves building control. A new spur for a boiling water tap on an existing kitchen circuit is not notifiable under Part P, but it must meet BS 7671.

Conservation areas are widespread across London, so a new extractor vent on a front wall may need permission, and leaseholders usually need the freeholder's written consent first.

Getting the most from your sink and tap installation

For a ceramic farmhouse-style sink in your Morden kitchen, confirm the base unit is designed for it, as a standard sink unit may not carry the weight.
Find the stopcock in your Morden home before the plumber arrives and check it turns off fully, as older stopcocks can stick or let water past.
Choose the sink before stone worktops are templated in your Morden kitchen, so the fabricator can cut and polish the undermount opening to suit it.
If a dishwasher or washing machine sits next to the sink, plan their waste connections and the trap layout together with the sink.

Questions about sink and tap installation in Morden

How much does sink and tap installation cost in Morden?

Guide prices in Morden are about £260 to £520 including VAT for plumbing in a new sink and tap. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Which parts of Morden do you work in?

All of them. Our Greater London coverage takes in the whole of Morden, including the SM4 postcode district, as well as surrounding towns such as Mitcham. If you are unsure, send us your postcode.

What is the difference between an inset and an undermount sink?

An inset sink drops into a cut-out from above, with its rim resting on the worktop, and suits laminate, wood and stone. An undermount sink is fixed beneath the worktop so the edge of the cut-out is exposed, which usually calls for a solid, water-resistant material such as stone or solid surface. Undermount cut-outs in stone are cut and polished by the fabricator.

Do I need isolation valves under my kitchen sink?

They are strongly advised, and we fit them as standard. An isolation valve on each supply to the tap, and on each appliance supply, lets you turn off the water to one fitting without shutting off the whole house. That makes changing a tap cartridge or dealing with a leak far simpler. The valves are left where they can still be reached once the cupboard is in use.

What do I need for a boiling water tap?

A boiling water tap needs a tank in the cupboard under the sink, usually a socket or fused spur to power it, and often a filter, particularly where the water is hard. Some models have a minimum water pressure, so check yours before buying. The tap also needs a correctly sized hole in the sink or worktop and enough clear cupboard space for the tank and pipework.

Sink and tap installation in neighbouring towns

We also carry out sink and tap installation in these towns near Morden: