Sink and tap installation · Northern Ireland
Sink and tap installation in County Armagh
Our sink and tap installation work covers the whole of County Armagh, including Craigavon, Portadown and Armagh.
What prompts sink and tap installation in County Armagh?
A County Armagh kitchen with the sink in an awkward corner may work better with the sink under the window or on an island, which means new supplies and a new waste run.
Homeowners across County Armagh adding a boiling water tap often need a socket or spur in the sink cupboard, a filter and space for the tank planned in.
What does sink and tap installation in County Armagh include?
The exact scope is agreed after the survey, but a typical job in County Armagh covers:
- New sink fitted, sealed and connected to the existing supplies and waste
- Isolation valves on the hot and cold supplies, with flexible tap tails connected
- Waste, overflow and trap fitted, with dishwasher and washing machine waste connections
- Inset sink cut-outs made on site in laminate and wood worktops
- Ceramic farmhouse-style sinks set on a suitable supporting base unit and sealed
- Boiling water tap fitted with its tank, filter and power supply in the cupboard
- Sink moved to a new position with new supply and waste runs
- Every joint leak tested, with water flow and drainage checked before handover
How much does sink and tap installation cost in County Armagh?
Use these ranges to plan your budget. They include VAT, reflect costs in Northern Ireland, and are firmed up once we have seen your County Armagh kitchen. Costs across Northern Ireland tend to sit under UK averages, which these ranges reflect.
| Typical project | Guide price |
|---|---|
| Sink and tap plumbed inIsolation valves, waste and trap | £180–£350 |
| Boiling water tap installedTank under the sink, filter and power supply | £130–£310 |
| Sink moved to a new positionNew supplies and waste run | £350–£880 |
| Undermount sink in a stone worktopCut-out and polishing are done by the stone fabricator | Priced with the worktop |
Guide ranges cover labour and fittings such as valves, tails and wastes; the sink and tap themselves are extra, and undermount cut-outs in stone are priced with the worktop by the fabricator. Prices include VAT at 20%.
Kitchens in homes across County Armagh
Across County Armagh you will often find Georgian townhouses, red-brick terraces, new town houses and rural bungalows, and each shapes the kitchen differently. Georgian houses in Armagh often have kitchens in former back rooms, while new-town houses in Craigavon and rural bungalows tend to have compact rectangular kitchens.
Hardness in County Armagh depends on the source, from soft to moderately hard, so check with your water supplier before choosing a filter. Country lanes and farm entrances can be tight for delivery lorries, and older terraced streets may have limited parking, so delivery is planned ahead.
Rural bungalow refits are common, often adding a utility room for boots and laundry, more storage and an open kitchen-dining area. Terraces and Georgian town houses tend to have smaller kitchens, where careful planning around period features, chimney breasts and uneven walls matters.
Rules for sink and tap installation in County Armagh
In Northern Ireland, a like-for-like sink and tap replacement needs no building control application, and water fittings should meet the water fittings regulations that apply there. New connections to underground drains go to council building control. There is no Part P-style notification for domestic electrics, but a supply for a boiling water tap should be installed and tested to BS 7671 and certified.
Armagh's Georgian centre is a conservation area with many listed buildings, so new external vents or changes to historic features there may need consent first.
Before you start
- Moving the sink means new supply and waste runs, so check the waste can fall properly to the drain or stack from the new position.
- If a dishwasher or washing machine sits next to the sink, plan their waste connections and the trap layout together with the sink.
- Keep isolation valves reachable under the sink, so the tap can be serviced or a leak stopped without turning off the whole house supply.
- Check a boiling water tap's minimum water pressure and cupboard space before buying, as the tank, filter and power supply all sit under the sink.
- For a ceramic farmhouse-style sink in your County Armagh kitchen, confirm the base unit is designed for it, as a standard sink unit may not carry the weight.
- Empty the sink cupboard before fitting day, and plan where cleaning products will go while the waste, trap and valves are being changed.
Questions about sink and tap installation in County Armagh
How much does sink and tap installation cost in County Armagh?
Sink and tap installation in County Armagh typically costs £180 to £350 including VAT for plumbing in a new sink and tap, based on prices in Northern Ireland. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.
Do you cover the whole of County Armagh?
Yes. We carry out sink and tap installation across County Armagh, including Craigavon, Portadown and Armagh. Every job starts with a free survey visit and an itemised written quote.
Can a dishwasher and washing machine drain through the sink waste?
Yes, in most kitchens. The sink trap can take an appliance connection on a spigot, or a separate standpipe can be fitted. The appliance hose needs to rise to the height its manufacturer specifies before it drops to the waste, so dirty water cannot siphon back. Two appliances can usually share a double-spigot trap, which we plan with the sink.
Do I need isolation valves under my kitchen sink?
They are strongly advised, and we fit them as standard. An isolation valve on each supply to the tap, and on each appliance supply, lets you turn off the water to one fitting without shutting off the whole house. That makes changing a tap cartridge or dealing with a leak far simpler. The valves are left where they can still be reached once the cupboard is in use.
What do I need for a boiling water tap?
A boiling water tap needs a tank in the cupboard under the sink, usually a socket or fused spur to power it, and often a filter, particularly where the water is hard. Some models have a minimum water pressure, so check yours before buying. The tap also needs a correctly sized hole in the sink or worktop and enough clear cupboard space for the tank and pipework.
Sink and tap installation in towns across County Armagh
Choose a town for local guide prices and postcode coverage:
- Sink and tap installation in Craigavon
- Sink and tap installation in Portadown
- Sink and tap installation in Armagh