Sink and tap installation · County Armagh
Sink and tap installation in Armagh
Sink and tap installation in Armagh starts with a free survey visit: we measure up, check the walls, floor and service positions, and explain what the job involves before anything is priced.
What prompts sink and tap installation in Armagh?
An Armagh kitchen with the sink in an awkward corner may work better with the sink under the window or on an island, which means new supplies and a new waste run.
People in Armagh with low water pressure sometimes find a new tap disappointing, so checking the pressure before choosing a tap or boiling water tap saves trouble later. Kitchens in every part of Armagh are covered, and the survey visit is free wherever you are in County Armagh.
What is in a typical job?
Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:
- Isolation valves on the hot and cold supplies, with flexible tap tails connected
- Waste, overflow and trap fitted, with dishwasher and washing machine waste connections
- Every joint leak tested, with water flow and drainage checked before handover
- Ceramic farmhouse-style sinks set on a suitable supporting base unit and sealed
- Inset sink cut-outs made on site in laminate and wood worktops
- Sink moved to a new position with new supply and waste runs
How much does sink and tap installation cost in Armagh?
The figures below are guide prices for Armagh, including VAT and adjusted for typical costs across Northern Ireland. The fixed price comes after we have measured up. Prices in Northern Ireland usually come in below the national guide, as labour rates are lower than in the South East.
| Typical project | Guide price |
|---|---|
| Sink and tap plumbed inIsolation valves, waste and trap | £180–£350 |
| Boiling water tap installedTank under the sink, filter and power supply | £130–£310 |
| Sink moved to a new positionNew supplies and waste run | £350–£880 |
| Undermount sink in a stone worktopCut-out and polishing are done by the stone fabricator | Priced with the worktop |
Guide ranges cover labour and fittings such as valves, tails and wastes; the sink and tap themselves are extra, and undermount cut-outs in stone are priced with the worktop by the fabricator. Prices include VAT at 20%.
House types around Armagh and what they mean for a kitchen
Across County Armagh you will often find Georgian townhouses, red-brick terraces, new town houses and rural bungalows, and each shapes the kitchen differently. Georgian houses in Armagh often have kitchens in former back rooms, while new-town houses in Craigavon and rural bungalows tend to have compact rectangular kitchens.
Hardness in County Armagh depends on the source, from soft to moderately hard, so check with your water supplier before choosing a filter. Country lanes and farm entrances can be tight for delivery lorries, and older terraced streets may have limited parking, so delivery is planned ahead.
What rules apply to sink and tap installation in Armagh?
In Northern Ireland, a like-for-like sink and tap replacement needs no building control application, and water fittings should meet the water fittings regulations that apply there. New connections to underground drains go to council building control. There is no Part P-style notification for domestic electrics, but a supply for a boiling water tap should be installed and tested to BS 7671 and certified.
Armagh's Georgian centre is a conservation area with many listed buildings, so new external vents or changes to historic features there may need consent first.
Before you book sink and tap installation in Armagh
- Find the stopcock in your Armagh home before the plumber arrives and check it turns off fully, as older stopcocks can stick or let water past.
- For a ceramic farmhouse-style sink in your Armagh kitchen, confirm the base unit is designed for it, as a standard sink unit may not carry the weight.
- Empty the sink cupboard before fitting day, and plan where cleaning products will go while the waste, trap and valves are being changed.
- Check a boiling water tap's minimum water pressure and cupboard space before buying, as the tank, filter and power supply all sit under the sink.
Questions about sink and tap installation in Armagh
How much does sink and tap installation cost in Armagh?
Guide prices in Armagh are about £180 to £350 including VAT for plumbing in a new sink and tap. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.
Can you measure up in Armagh before quoting?
Yes. Every quote starts with a free, no-obligation survey visit to your home in Armagh. We measure the room, check the walls, floor and service positions, then send an itemised written quote.
What do I need for a boiling water tap?
A boiling water tap needs a tank in the cupboard under the sink, usually a socket or fused spur to power it, and often a filter, particularly where the water is hard. Some models have a minimum water pressure, so check yours before buying. The tap also needs a correctly sized hole in the sink or worktop and enough clear cupboard space for the tank and pipework.
Do I need isolation valves under my kitchen sink?
They are strongly advised, and we fit them as standard. An isolation valve on each supply to the tap, and on each appliance supply, lets you turn off the water to one fitting without shutting off the whole house. That makes changing a tap cartridge or dealing with a leak far simpler. The valves are left where they can still be reached once the cupboard is in use.
Can a dishwasher and washing machine drain through the sink waste?
Yes, in most kitchens. The sink trap can take an appliance connection on a spigot, or a separate standpipe can be fitted. The appliance hose needs to rise to the height its manufacturer specifies before it drops to the waste, so dirty water cannot siphon back. Two appliances can usually share a double-spigot trap, which we plan with the sink.
Sink and tap installation in neighbouring towns
We also carry out sink and tap installation in these towns near Armagh:
- Sink and tap installation in Portadown
- Sink and tap installation in Dungannon
- Sink and tap installation in Craigavon
- Sink and tap installation in Banbridge
- Sink and tap installation in Newry
- Sink and tap installation in Cookstown
- Sink and tap installation across County Armagh