Sink and tap installation · Northern Ireland
Sink and tap installation in County Down
We carry out sink and tap installation across County Down, from Bangor, County Down to the smaller towns, with a free survey visit and an itemised written quote as standard.
What prompts sink and tap installation in County Down?
Landlords in County Down often swap tired sinks and taps between tenancies, choosing hard-wearing finishes and accessible valves so that later repairs are quick and cheap.
Plenty of people in County Down replace a sink and tap on their own when the tap drips, the bowl is stained or the waste drains slowly, without touching the rest of the kitchen.
What does sink and tap installation in County Down include?
Here is what usually goes into sink and tap installation, adjusted to your County Down kitchen after we have measured it:
- New sink fitted, sealed and connected to the existing supplies and waste
- Isolation valves on the hot and cold supplies, with flexible tap tails connected
- Waste, overflow and trap fitted, with dishwasher and washing machine waste connections
- Inset sink cut-outs made on site in laminate and wood worktops
- Ceramic farmhouse-style sinks set on a suitable supporting base unit and sealed
- Boiling water tap fitted with its tank, filter and power supply in the cupboard
- Sink moved to a new position with new supply and waste runs
- Every joint leak tested, with water flow and drainage checked before handover
How much does sink and tap installation cost in County Down?
The figures below are guide prices for County Down, including VAT and adjusted for typical costs across Northern Ireland. The fixed price comes after we have measured up. Prices in Northern Ireland usually come in below the national guide, as labour rates are lower than in the South East.
| Typical project | Guide price |
|---|---|
| Sink and tap plumbed inIsolation valves, waste and trap | £180–£350 |
| Boiling water tap installedTank under the sink, filter and power supply | £130–£310 |
| Sink moved to a new positionNew supplies and waste run | £350–£880 |
| Undermount sink in a stone worktopCut-out and polishing are done by the stone fabricator | Priced with the worktop |
Guide ranges cover labour and fittings such as valves, tails and wastes; the sink and tap themselves are extra, and undermount cut-outs in stone are priced with the worktop by the fabricator. Prices include VAT at 20%.
Kitchens in homes across County Down
You will find Victorian seaside villas, red-brick terraces, rural bungalows and new-build estates throughout County Down. Victorian villas in the seaside towns often have a separate kitchen and old scullery, while newer estate houses tend to have an open-plan kitchen-diner.
Most of County Down has soft mains water, so limescale is less of a concern and taps, sinks and boiling water taps stay cleaner. Country lanes in the Mournes and on the Ards Peninsula can be narrow for lorries, and seaside flats may have no lift, so access is checked early.
Joining a villa kitchen and old scullery into one room is a common project, and removing a load-bearing wall needs building control approval. Newer estate homes around Newtownards and Banbridge more often need a straight replacement with integrated appliances, an island or peninsula and better lighting.
Rules for sink and tap installation in County Down
In Northern Ireland, a like-for-like sink and tap replacement needs no building control application, and water fittings should meet the water fittings regulations that apply there. New connections to underground drains go to council building control. There is no Part P-style notification for domestic electrics, but a supply for a boiling water tap should be installed and tested to BS 7671 and certified.
Many older towns and villages in County Down have conservation areas or listed buildings, where a new external vent or changes to historic features may need consent.
Before you start
- Ceramic farmhouse-style sinks are heavy and need a base unit designed to carry them, with the worktop planned around the sink.
- Moving the sink means new supply and waste runs, so check the waste can fall properly to the drain or stack from the new position.
- Check a boiling water tap's minimum water pressure and cupboard space before buying, as the tank, filter and power supply all sit under the sink.
- Keep isolation valves reachable under the sink, so the tap can be serviced or a leak stopped without turning off the whole house supply.
- Find the stopcock in your County Down home before the plumber arrives and check it turns off fully, as older stopcocks can stick or let water past.
- Check the tap's hole size against the sink or worktop before ordering, as some taps need a larger hole than an existing sink provides.
Questions about sink and tap installation in County Down
How much does sink and tap installation cost in County Down?
For plumbing in a new sink and tap, budget around £180 to £350 including VAT in County Down. That reflects typical costs in Northern Ireland; we confirm the actual figure in writing once we have measured up.
Do you cover the whole of County Down?
Yes. We carry out sink and tap installation across County Down, including Bangor, County Down, Castlereagh, Newtownards and Banbridge. Every job starts with a free survey visit and an itemised written quote.
What do I need for a boiling water tap?
A boiling water tap needs a tank in the cupboard under the sink, usually a socket or fused spur to power it, and often a filter, particularly where the water is hard. Some models have a minimum water pressure, so check yours before buying. The tap also needs a correctly sized hole in the sink or worktop and enough clear cupboard space for the tank and pipework.
Do I need isolation valves under my kitchen sink?
They are strongly advised, and we fit them as standard. An isolation valve on each supply to the tap, and on each appliance supply, lets you turn off the water to one fitting without shutting off the whole house. That makes changing a tap cartridge or dealing with a leak far simpler. The valves are left where they can still be reached once the cupboard is in use.
Can a dishwasher and washing machine drain through the sink waste?
Yes, in most kitchens. The sink trap can take an appliance connection on a spigot, or a separate standpipe can be fitted. The appliance hose needs to rise to the height its manufacturer specifies before it drops to the waste, so dirty water cannot siphon back. Two appliances can usually share a double-spigot trap, which we plan with the sink.
Sink and tap installation in towns across County Down
Choose a town for local guide prices and postcode coverage:
- Sink and tap installation in Bangor, County Down
- Sink and tap installation in Castlereagh
- Sink and tap installation in Newtownards
- Sink and tap installation in Banbridge
- Sink and tap installation in Downpatrick
- Sink and tap installation in Newry