Sink and tap installation in Craigavon

What prompts sink and tap installation in Craigavon?

People in Craigavon with low water pressure sometimes find a new tap disappointing, so checking the pressure before choosing a tap or boiling water tap saves trouble later.

If you are fitting new stone worktops in your Craigavon kitchen, it is a natural point to change to an undermount sink cut and polished by the fabricator. We cover all of Craigavon, including the BT62, BT63, BT64, BT65, BT66 and BT67 postcode districts, and travel out to neighbouring towns across County Armagh.

What is included in the work?

The exact scope is agreed after the survey, but a typical job in Craigavon covers:

Boiling water tap fitted with its tank, filter and power supply in the cupboard
Waste, overflow and trap fitted, with dishwasher and washing machine waste connections
New sink fitted, sealed and connected to the existing supplies and waste
Ceramic farmhouse-style sinks set on a suitable supporting base unit and sealed
Isolation valves on the hot and cold supplies, with flexible tap tails connected
Every joint leak tested, with water flow and drainage checked before handover

What should you budget for sink and tap installation in Craigavon?

The figures below are guide prices for Craigavon, including VAT and adjusted for typical costs across Northern Ireland. The fixed price comes after we have measured up. Prices in Northern Ireland usually come in below the national guide, as labour rates are lower than in the South East.

What should you budget for sink and tap installation in Craigavon?
Typical project	Guide price
Sink and tap plumbed inIsolation valves, waste and trap	£180–£350
Boiling water tap installedTank under the sink, filter and power supply	£130–£310
Sink moved to a new positionNew supplies and waste run	£350–£880
Undermount sink in a stone worktopCut-out and polishing are done by the stone fabricator	Priced with the worktop

Guide ranges cover labour and fittings such as valves, tails and wastes; the sink and tap themselves are extra, and undermount cut-outs in stone are priced with the worktop by the fabricator. Prices include VAT at 20%.

What kind of kitchens do we fit in Craigavon?

The housing mix across County Armagh includes Georgian townhouses, red-brick terraces, new town houses and rural bungalows, so no two kitchen fits are quite alike. Georgian houses in Armagh often have kitchens in former back rooms, while new-town houses in Craigavon and rural bungalows tend to have compact rectangular kitchens.

Country lanes and farm entrances can be tight for delivery lorries, and older terraced streets may have limited parking, so delivery is planned ahead. Hardness in County Armagh depends on the source, from soft to moderately hard, so check with your water supplier before choosing a filter.

Regulations for kitchen work in Craigavon

In Northern Ireland, a like-for-like sink and tap replacement needs no building control application, and water fittings should meet the water fittings regulations that apply there. New connections to underground drains go to council building control. There is no Part P-style notification for domestic electrics, but a supply for a boiling water tap should be installed and tested to BS 7671 and certified.

Armagh's Georgian centre is a conservation area with many listed buildings, so new external vents or changes to historic features there may need consent first.

Getting the most from your sink and tap installation

Before buying a boiling water tap for your Craigavon home, check its minimum water pressure and how much space it needs in the sink cupboard.
For a ceramic farmhouse-style sink in your Craigavon kitchen, confirm the base unit is designed for it, as a standard sink unit may not carry the weight.
Check the tap's hole size against the sink or worktop before ordering, as some taps need a larger hole than an existing sink provides.
Moving the sink means new supply and waste runs, so check the waste can fall properly to the drain or stack from the new position.

Questions about sink and tap installation in Craigavon

How much does sink and tap installation cost in Craigavon?

Guide prices in Craigavon are about £180 to £350 including VAT for plumbing in a new sink and tap. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you cover all of Craigavon?

Yes. We work across Craigavon, including the BT62, BT63, BT64, BT65, BT66 and BT67 postcode districts, and nearby towns such as Portadown and Banbridge. Book a free survey visit and we will arrange a time that suits you.

Do I need isolation valves under my kitchen sink?

They are strongly advised, and we fit them as standard. An isolation valve on each supply to the tap, and on each appliance supply, lets you turn off the water to one fitting without shutting off the whole house. That makes changing a tap cartridge or dealing with a leak far simpler. The valves are left where they can still be reached once the cupboard is in use.

What is the difference between an inset and an undermount sink?

An inset sink drops into a cut-out from above, with its rim resting on the worktop, and suits laminate, wood and stone. An undermount sink is fixed beneath the worktop so the edge of the cut-out is exposed, which usually calls for a solid, water-resistant material such as stone or solid surface. Undermount cut-outs in stone are cut and polished by the fabricator.

What do I need for a boiling water tap?

A boiling water tap needs a tank in the cupboard under the sink, usually a socket or fused spur to power it, and often a filter, particularly where the water is hard. Some models have a minimum water pressure, so check yours before buying. The tap also needs a correctly sized hole in the sink or worktop and enough clear cupboard space for the tank and pipework.

Also covering nearby towns

Neighbouring towns where we offer sink and tap installation: