Sink and tap installation · Northern Ireland
Sink and tap installation in County Tyrone
Our sink and tap installation work covers the whole of County Tyrone, including Omagh, Strabane and Dungannon.
Is sink and tap installation right for your County Tyrone kitchen?
If you are fitting new stone worktops in your County Tyrone kitchen, it is a natural point to change to an undermount sink cut and polished by the fabricator.
Some County Tyrone households choose a deep ceramic farmhouse-style sink for a new kitchen and need the base unit and worktop planned around its weight and size.
What does sink and tap installation in County Tyrone include?
Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:
- New sink fitted, sealed and connected to the existing supplies and waste
- Isolation valves on the hot and cold supplies, with flexible tap tails connected
- Waste, overflow and trap fitted, with dishwasher and washing machine waste connections
- Inset sink cut-outs made on site in laminate and wood worktops
- Ceramic farmhouse-style sinks set on a suitable supporting base unit and sealed
- Boiling water tap fitted with its tank, filter and power supply in the cupboard
- Sink moved to a new position with new supply and waste runs
- Every joint leak tested, with water flow and drainage checked before handover
How much does sink and tap installation cost in County Tyrone?
Typical sink and tap installation prices for homes in County Tyrone, including VAT and adjusted for Northern Ireland. Your own figure depends on the size of the kitchen, the layout and what is moving. Prices in Northern Ireland usually come in below the national guide, as labour rates are lower than in the South East.
| Typical project | Guide price |
|---|---|
| Sink and tap plumbed inIsolation valves, waste and trap | £180–£350 |
| Boiling water tap installedTank under the sink, filter and power supply | £130–£310 |
| Sink moved to a new positionNew supplies and waste run | £350–£880 |
| Undermount sink in a stone worktopCut-out and polishing are done by the stone fabricator | Priced with the worktop |
Guide ranges cover labour and fittings such as valves, tails and wastes; the sink and tap themselves are extra, and undermount cut-outs in stone are priced with the worktop by the fabricator. Prices include VAT at 20%.
Kitchens in homes across County Tyrone
The housing mix across County Tyrone includes rural bungalows, farmhouses, red-brick terraces and post-war estate houses, so no two kitchen fits are quite alike. Rural bungalows often have a long kitchen-dining room at the back, while terraced houses in Omagh and Strabane tend to have a narrow kitchen in the return.
Hardness varies across County Tyrone depending on the source, and some rural homes use private supplies, so check before choosing a filter or boiling water tap. Farm lanes, long drives and narrow country roads can limit delivery vehicles, so worktop lengths and delivery times are planned at the survey.
In a rural bungalow or farmhouse, the kitchen often doubles as the main living space, with a range, a large table and a utility for boots. Terraced houses in the towns tend to have small return kitchens that owners open into the living room.
Rules for sink and tap installation in County Tyrone
In Northern Ireland, a like-for-like sink and tap replacement needs no building control application, and water fittings should meet the water fittings regulations that apply there. New connections to underground drains go to council building control. There is no Part P-style notification for domestic electrics, but a supply for a boiling water tap should be installed and tested to BS 7671 and certified.
A kitchen fit itself needs no planning permission, but listed buildings and homes in conservation areas in older town centres may need consent for new external vents.
Before you start
- Keep isolation valves reachable under the sink, so the tap can be serviced or a leak stopped without turning off the whole house supply.
- Moving the sink means new supply and waste runs, so check the waste can fall properly to the drain or stack from the new position.
- Check a boiling water tap's minimum water pressure and cupboard space before buying, as the tank, filter and power supply all sit under the sink.
- An undermount sink in a stone worktop is cut and polished by the fabricator, so choose the sink before the worktops are templated.
- Find the stopcock in your County Tyrone home before the plumber arrives and check it turns off fully, as older stopcocks can stick or let water past.
- For a ceramic farmhouse-style sink in your County Tyrone kitchen, confirm the base unit is designed for it, as a standard sink unit may not carry the weight.
Questions about sink and tap installation in County Tyrone
How much does sink and tap installation cost in County Tyrone?
Sink and tap installation in County Tyrone typically costs £180 to £350 including VAT for plumbing in a new sink and tap, based on prices in Northern Ireland. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.
Do you cover the whole of County Tyrone?
Yes. We carry out sink and tap installation across County Tyrone, including Omagh, Strabane, Dungannon and Cookstown. Every job starts with a free survey visit and an itemised written quote.
What is the difference between an inset and an undermount sink?
An inset sink drops into a cut-out from above, with its rim resting on the worktop, and suits laminate, wood and stone. An undermount sink is fixed beneath the worktop so the edge of the cut-out is exposed, which usually calls for a solid, water-resistant material such as stone or solid surface. Undermount cut-outs in stone are cut and polished by the fabricator.
Do I need isolation valves under my kitchen sink?
They are strongly advised, and we fit them as standard. An isolation valve on each supply to the tap, and on each appliance supply, lets you turn off the water to one fitting without shutting off the whole house. That makes changing a tap cartridge or dealing with a leak far simpler. The valves are left where they can still be reached once the cupboard is in use.
What do I need for a boiling water tap?
A boiling water tap needs a tank in the cupboard under the sink, usually a socket or fused spur to power it, and often a filter, particularly where the water is hard. Some models have a minimum water pressure, so check yours before buying. The tap also needs a correctly sized hole in the sink or worktop and enough clear cupboard space for the tank and pipework.
Sink and tap installation in towns across County Tyrone
Choose a town for local guide prices and postcode coverage:
- Sink and tap installation in Omagh
- Sink and tap installation in Strabane
- Sink and tap installation in Dungannon
- Sink and tap installation in Cookstown