Sink and tap installation in Chatham

Who usually needs sink and tap installation in Chatham?

Landlords in Kent often swap tired sinks and taps between tenancies, choosing hard-wearing finishes and accessible valves so that later repairs are quick and cheap.

People in Chatham with low water pressure sometimes find a new tap disappointing, so checking the pressure before choosing a tap or boiling water tap saves trouble later. Our Kent coverage reaches every part of Chatham (ME4) and out towards Gillingham.

What does the job involve?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Boiling water tap fitted with its tank, filter and power supply in the cupboard
Inset sink cut-outs made on site in laminate and wood worktops
New sink fitted, sealed and connected to the existing supplies and waste
Every joint leak tested, with water flow and drainage checked before handover
Ceramic farmhouse-style sinks set on a suitable supporting base unit and sealed
Isolation valves on the hot and cold supplies, with flexible tap tails connected

Sink and tap installation prices in Chatham

The figures below are guide prices for Chatham, including VAT and adjusted for typical costs across the South East. The fixed price comes after we have measured up. Prices in the South East usually run above the national guide, mainly because labour and parking cost more.

Sink and tap installation prices in Chatham
Typical project	Guide price
Sink and tap plumbed inIsolation valves, waste and trap	£230–£460
Boiling water tap installedTank under the sink, filter and power supply	£170–£400
Sink moved to a new positionNew supplies and waste run	£460–£1,200
Undermount sink in a stone worktopCut-out and polishing are done by the stone fabricator	Priced with the worktop

Guide ranges cover labour and fittings such as valves, tails and wastes; the sink and tap themselves are extra, and undermount cut-outs in stone are priced with the worktop by the fabricator. Prices include VAT at 20%.

House types around Chatham and what they mean for a kitchen

The housing mix across Kent includes Victorian terraces, weatherboarded cottages, 1930s semis and oast house conversions, so no two kitchen fits are quite alike. Victorian terraces in the Medway towns and along the coast often have a narrow back-addition kitchen, while 1930s semis usually have a small kitchen beside a separate dining room.

Water across Kent is hard, so limescale builds up quickly on taps and boiling water taps, and a scale-reducing filter is worth considering. Seaside terraces, permit parking and narrow village lanes can each make deliveries slower, so the route for long worktops is best checked at the survey.

Regulations for kitchen work in Chatham

Replacing a sink and tap needs no approval in England, but the plumbing should meet the Water Supply (Water Fittings) Regulations 1999, including isolation valves and backflow protection. Connecting to an existing waste is routine, while a new connection to an underground drain involves building control. A new spur for a boiling water tap on an existing kitchen circuit is not notifiable under Part P, but it must meet BS 7671.

Listed weatherboarded and timber-framed cottages, oast conversions and homes in conservation areas such as historic Canterbury may need consent for new external vents.

Getting the most from your sink and tap installation

For a ceramic farmhouse-style sink in your Chatham kitchen, confirm the base unit is designed for it, as a standard sink unit may not carry the weight.
Ask for the dishwasher and washing machine hoses to be routed so they cannot kink behind the units once the appliances are pushed back into place.
Before buying a boiling water tap for your Chatham home, check its minimum water pressure and how much space it needs in the sink cupboard.
Moving the sink means new supply and waste runs, so check the waste can fall properly to the drain or stack from the new position.

Questions about sink and tap installation in Chatham

How much does sink and tap installation cost in Chatham?

Sink and tap installation in Chatham typically costs £230 to £460 including VAT for plumbing in a new sink and tap, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Can you measure up in Chatham before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Chatham. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Do I need isolation valves under my kitchen sink?

They are strongly advised, and we fit them as standard. An isolation valve on each supply to the tap, and on each appliance supply, lets you turn off the water to one fitting without shutting off the whole house. That makes changing a tap cartridge or dealing with a leak far simpler. The valves are left where they can still be reached once the cupboard is in use.

What do I need for a boiling water tap?

A boiling water tap needs a tank in the cupboard under the sink, usually a socket or fused spur to power it, and often a filter, particularly where the water is hard. Some models have a minimum water pressure, so check yours before buying. The tap also needs a correctly sized hole in the sink or worktop and enough clear cupboard space for the tank and pipework.

What is the difference between an inset and an undermount sink?

An inset sink drops into a cut-out from above, with its rim resting on the worktop, and suits laminate, wood and stone. An undermount sink is fixed beneath the worktop so the edge of the cut-out is exposed, which usually calls for a solid, water-resistant material such as stone or solid surface. Undermount cut-outs in stone are cut and polished by the fabricator.

Sink and tap installation in neighbouring towns

We also carry out sink and tap installation in these towns near Chatham: