Sink and tap installation in Gillingham

Why sink and tap installation for a Gillingham home?

Plenty of people in Gillingham replace a sink and tap on their own when the tap drips, the bowl is stained or the waste drains slowly, without touching the rest of the kitchen.

If a new dishwasher or washing machine is going next to the sink in your Gillingham home, the trap and waste connections usually need changing as well. We cover all of Gillingham, including the ME7 postcode district, and travel out to neighbouring towns across Kent.

What does sink and tap installation in Gillingham include?

Here is what usually goes into sink and tap installation, adjusted to your Gillingham kitchen after we have measured it:

Waste, overflow and trap fitted, with dishwasher and washing machine waste connections
Ceramic farmhouse-style sinks set on a suitable supporting base unit and sealed
Every joint leak tested, with water flow and drainage checked before handover
Sink moved to a new position with new supply and waste runs
Inset sink cut-outs made on site in laminate and wood worktops
New sink fitted, sealed and connected to the existing supplies and waste

What does sink and tap installation cost in Gillingham?

Typical sink and tap installation prices for homes in Gillingham, including VAT and adjusted for the South East. Your own figure depends on the size of the kitchen, the layout and what is moving. Expect costs in the South East to sit somewhat above UK averages, reflecting local labour rates.

What does sink and tap installation cost in Gillingham?
Typical project	Guide price
Sink and tap plumbed inIsolation valves, waste and trap	£230–£460
Boiling water tap installedTank under the sink, filter and power supply	£170–£400
Sink moved to a new positionNew supplies and waste run	£460–£1,200
Undermount sink in a stone worktopCut-out and polishing are done by the stone fabricator	Priced with the worktop

Guide ranges cover labour and fittings such as valves, tails and wastes; the sink and tap themselves are extra, and undermount cut-outs in stone are priced with the worktop by the fabricator. Prices include VAT at 20%.

Local homes and their kitchens

You will find Victorian terraces, weatherboarded cottages, 1930s semis and oast house conversions throughout Kent. Victorian terraces in the Medway towns and along the coast often have a narrow back-addition kitchen, while 1930s semis usually have a small kitchen beside a separate dining room.

Seaside terraces, permit parking and narrow village lanes can each make deliveries slower, so the route for long worktops is best checked at the survey. Water across Kent is hard, so limescale builds up quickly on taps and boiling water taps, and a scale-reducing filter is worth considering.

Regulations for kitchen work in Gillingham

Replacing a sink and tap needs no approval in England, but the plumbing should meet the Water Supply (Water Fittings) Regulations 1999, including isolation valves and backflow protection. Connecting to an existing waste is routine, while a new connection to an underground drain involves building control. A new spur for a boiling water tap on an existing kitchen circuit is not notifiable under Part P, but it must meet BS 7671.

Listed weatherboarded and timber-framed cottages, oast conversions and homes in conservation areas such as historic Canterbury may need consent for new external vents.

Getting the most from your sink and tap installation

Check the tap's hole size against the sink or worktop before ordering, as some taps need a larger hole than an existing sink provides.
Choose the sink before stone worktops are templated in your Gillingham kitchen, so the fabricator can cut and polish the undermount opening to suit it.
Ask for the dishwasher and washing machine hoses to be routed so they cannot kink behind the units once the appliances are pushed back into place.
Check a boiling water tap's minimum water pressure and cupboard space before buying, as the tank, filter and power supply all sit under the sink.

Questions about sink and tap installation in Gillingham

How much does sink and tap installation cost in Gillingham?

For plumbing in a new sink and tap, budget around £230 to £460 including VAT in Gillingham. That reflects typical costs in the South East; we confirm the actual figure in writing once we have measured up.

Do you work near Gillingham as well?

Yes. As well as Gillingham itself, we cover the rest of Kent and nearby towns such as Chatham and Rochester. The process is the same wherever the kitchen is.

What is the difference between an inset and an undermount sink?

An inset sink drops into a cut-out from above, with its rim resting on the worktop, and suits laminate, wood and stone. An undermount sink is fixed beneath the worktop so the edge of the cut-out is exposed, which usually calls for a solid, water-resistant material such as stone or solid surface. Undermount cut-outs in stone are cut and polished by the fabricator.

Can a dishwasher and washing machine drain through the sink waste?

Yes, in most kitchens. The sink trap can take an appliance connection on a spigot, or a separate standpipe can be fitted. The appliance hose needs to rise to the height its manufacturer specifies before it drops to the waste, so dirty water cannot siphon back. Two appliances can usually share a double-spigot trap, which we plan with the sink.

What do I need for a boiling water tap?

A boiling water tap needs a tank in the cupboard under the sink, usually a socket or fused spur to power it, and often a filter, particularly where the water is hard. Some models have a minimum water pressure, so check yours before buying. The tap also needs a correctly sized hole in the sink or worktop and enough clear cupboard space for the tank and pipework.

Also covering nearby towns

The same service is available a short drive from Gillingham, including: