Kitchen strip-out and removal in Chatham

Is kitchen strip-out and removal right for your Chatham kitchen?

In a flat in Chatham, removing a kitchen means planning the route out through shared stairs or lifts, protecting common areas and keeping to the building's working hours.

Some Chatham households are fitting a new kitchen themselves and want the heavy, messy part done by others, with gas capped and circuits made safe before they begin. We cover all of Chatham, including the ME4 postcode district, and travel out to neighbouring towns across Kent.

What does the job involve?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Waste taken through licensed routes and old appliances sent for recycling
Kitchen circuits isolated and made safe by an electrician
Wall units, base units, worktops, sink and appliances removed in order
Survey of gas, electrical and water positions and the route out of the house
Old tiles stripped and walls prepared for plaster, where that is agreed
Water isolated and supplies capped so the rest of the house keeps running water

What does kitchen strip-out and removal cost in Chatham?

As a starting point for Chatham, these ranges include VAT at 20% and allow for typical labour costs in the South East. Labour in the South East generally costs more than the UK average, which lifts these ranges a little.

What does kitchen strip-out and removal cost in Chatham?
Typical project	Guide price
Old kitchen removed and disposed ofUnits, worktops and appliances, including skip hire	£230–£580
Removal with services made safeGas capped by a Gas Safe engineer, circuits made safe by an electrician	£340–£800
Strip-out back to bare wallsOld tiles removed and walls prepared for plaster	£580–£1,400

Guide ranges include labour, protection, waste removal or skip hire and, where listed, making services safe; asbestos testing or removal and replastering are priced separately. Prices include VAT at 20%.

Local homes and their kitchens

Across Kent you will often find Victorian terraces, weatherboarded cottages, 1930s semis and oast house conversions, and each shapes the kitchen differently. Victorian terraces in the Medway towns and along the coast often have a narrow back-addition kitchen, while 1930s semis usually have a small kitchen beside a separate dining room.

Seaside terraces, permit parking and narrow village lanes can each make deliveries slower, so the route for long worktops is best checked at the survey. Water across Kent is hard, so limescale builds up quickly on taps and boiling water taps, and a scale-reducing filter is worth considering.

Regulations for kitchen work in Chatham

Removing a kitchen needs no planning permission in England, but a listed home may need listed building consent before historic fittings are taken out. Only a Gas Safe registered engineer may disconnect and cap a gas supply, and circuits should be made safe by an electrician to BS 7671. A skip on the road usually needs a council permit, which the skip firm normally arranges, and waste should go with a carrier registered with the Environment Agency.

Listed weatherboarded and timber-framed cottages, oast conversions and homes in conservation areas such as historic Canterbury may need consent for new external vents.

Worth knowing before the fit

Find your stopcock and gas meter before the day so the plumber and the Gas Safe engineer can isolate supplies in your Chatham home quickly.
If a skip will need to sit on the road outside your Chatham home, speak to the skip firm early, as a permit usually has to be arranged first.
Empty every cupboard, the fridge and the freezer the day before the strip-out, and defrost the freezer so it can be carried out without leaking.
Line up the new kitchen soon after the strip-out, as the room stays without a cooker or sink until the services are reconnected.

Questions about kitchen strip-out and removal in Chatham

How much does kitchen strip-out and removal cost in Chatham?

For removing and disposing of an old kitchen, budget around £230 to £580 including VAT in Chatham. That reflects typical costs in the South East; we confirm the actual figure in writing once we have measured up.

Can you measure up in Chatham before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Chatham. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Can you strip out a kitchen for another fitter or builder?

Yes. We can take out the old kitchen on its own and leave the room ready, with gas capped, circuits made safe and water isolated, so your builder or fitter starts with a clear space. Tell us at the survey what condition the walls and floor should be left in, because stripping back to bare walls is a bigger job than removing units.

Who disconnects the gas and electrics before a strip-out?

A Gas Safe registered engineer disconnects and caps the gas supply to the hob or cooker, which is a legal requirement everywhere in the UK. An electrician isolates the kitchen circuits and makes the cable ends safe to BS 7671, and the water is turned off and the supplies capped. Only then do the units and appliances come out.

What happens if asbestos is found during a kitchen strip-out?

Work in that area stops. Homes built before 2000 may contain asbestos in textured ceiling coatings, old floor tiles, some boiler cupboard boards and the bitumen pads under old steel sinks. Suspect material is sampled and tested by a specialist, and if it does contain asbestos it is removed by a specialist contractor under the asbestos regulations before the strip-out carries on.

Nearby places we cover

Neighbouring towns where we offer kitchen strip-out and removal: