Sink and tap installation in Gravesend

Is sink and tap installation right for your Gravesend kitchen?

Homeowners across Kent adding a boiling water tap often need a socket or spur in the sink cupboard, a filter and space for the tank planned in.

If a new dishwasher or washing machine is going next to the sink in your Gravesend home, the trap and waste connections usually need changing as well. We work throughout Gravesend (DA12) and across the wider Kent area.

What is included in the work?

After the survey visit we write the scope down. For sink and tap installation in Gravesend it usually covers:

Isolation valves on the hot and cold supplies, with flexible tap tails connected
Boiling water tap fitted with its tank, filter and power supply in the cupboard
Waste, overflow and trap fitted, with dishwasher and washing machine waste connections
Every joint leak tested, with water flow and drainage checked before handover
Inset sink cut-outs made on site in laminate and wood worktops
Sink moved to a new position with new supply and waste runs

What does sink and tap installation cost in Gravesend?

These guide ranges include VAT at 20% and are adjusted for prices in the South East. We confirm your price in writing after a free survey visit. Labour in the South East generally costs more than the UK average, which lifts these ranges a little.

What does sink and tap installation cost in Gravesend?
Typical project	Guide price
Sink and tap plumbed inIsolation valves, waste and trap	£230–£460
Boiling water tap installedTank under the sink, filter and power supply	£170–£400
Sink moved to a new positionNew supplies and waste run	£460–£1,200
Undermount sink in a stone worktopCut-out and polishing are done by the stone fabricator	Priced with the worktop

Guide ranges cover labour and fittings such as valves, tails and wastes; the sink and tap themselves are extra, and undermount cut-outs in stone are priced with the worktop by the fabricator. Prices include VAT at 20%.

Fitting kitchens in older and newer Gravesend homes

The housing mix across Kent includes Victorian terraces, weatherboarded cottages, 1930s semis and oast house conversions, so no two kitchen fits are quite alike. Victorian terraces in the Medway towns and along the coast often have a narrow back-addition kitchen, while 1930s semis usually have a small kitchen beside a separate dining room.

Seaside terraces, permit parking and narrow village lanes can each make deliveries slower, so the route for long worktops is best checked at the survey. Water across Kent is hard, so limescale builds up quickly on taps and boiling water taps, and a scale-reducing filter is worth considering.

Building regulations, electrics and gas in Gravesend

Replacing a sink and tap needs no approval in England, but the plumbing should meet the Water Supply (Water Fittings) Regulations 1999, including isolation valves and backflow protection. Connecting to an existing waste is routine, while a new connection to an underground drain involves building control. A new spur for a boiling water tap on an existing kitchen circuit is not notifiable under Part P, but it must meet BS 7671.

Listed weatherboarded and timber-framed cottages, oast conversions and homes in conservation areas such as historic Canterbury may need consent for new external vents.

Before you book sink and tap installation in Gravesend

Ask whether a boiling water tap for your kitchen in Kent needs a filter, how often it should be changed and where it will sit in the cupboard.
For a ceramic farmhouse-style sink in your Gravesend kitchen, confirm the base unit is designed for it, as a standard sink unit may not carry the weight.
Check the tap's hole size against the sink or worktop before ordering, as some taps need a larger hole than an existing sink provides.
Moving the sink means new supply and waste runs, so check the waste can fall properly to the drain or stack from the new position.

Questions about sink and tap installation in Gravesend

How much does sink and tap installation cost in Gravesend?

Sink and tap installation in Gravesend typically costs £230 to £460 including VAT for plumbing in a new sink and tap, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover all of Gravesend?

Yes. We work across Gravesend, including the DA12 postcode district, and nearby towns such as Swanscombe and Grays. Book a free survey visit and we will arrange a time that suits you.

What do I need for a boiling water tap?

A boiling water tap needs a tank in the cupboard under the sink, usually a socket or fused spur to power it, and often a filter, particularly where the water is hard. Some models have a minimum water pressure, so check yours before buying. The tap also needs a correctly sized hole in the sink or worktop and enough clear cupboard space for the tank and pipework.

Do I need isolation valves under my kitchen sink?

They are strongly advised, and we fit them as standard. An isolation valve on each supply to the tap, and on each appliance supply, lets you turn off the water to one fitting without shutting off the whole house. That makes changing a tap cartridge or dealing with a leak far simpler. The valves are left where they can still be reached once the cupboard is in use.

Can a dishwasher and washing machine drain through the sink waste?

Yes, in most kitchens. The sink trap can take an appliance connection on a spigot, or a separate standpipe can be fitted. The appliance hose needs to rise to the height its manufacturer specifies before it drops to the waste, so dirty water cannot siphon back. Two appliances can usually share a double-spigot trap, which we plan with the sink.

Nearby places we cover

Close to Gravesend? We cover these nearby towns too: