Kitchen electrics in Wellington

When do kitchen electrics make sense in Wellington?

If you are moving the hob to an island or swapping gas for induction in your Wellington home, the kitchen needs a new supply routed to the new cooking position.

Many kitchens in Wellington were wired when a kettle and a toaster were the only things on the worktop, so a refit is the natural time to put sockets where they are really used. Kitchens in every part of Wellington are covered, and the survey visit is free wherever you are in Shropshire.

What do kitchen electrics in Wellington include?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Supplies for the cooker hood, under-cabinet lights and a boiling water tap
Second fix of sockets, switches and appliance connections once tiling is done
First-fix cables and back boxes run before plastering or boarding
Accessible isolation switches for integrated appliances, reachable without pulling units out
A check of the consumer unit, existing circuits and earthing before the layout is fixed
Testing, the correct certificate, and notification of the work where it is required

What should you budget for kitchen electrics in Wellington?

The figures below are guide prices for Wellington, including VAT and adjusted for typical costs across the West Midlands. The fixed price comes after we have measured up. Prices across the West Midlands are broadly in line with UK averages.

What should you budget for kitchen electrics in Wellington?
Typical project	Guide price
Extra sockets or spurs on existing circuitsNew positions to suit the layout	£250–£500
Kitchen electrics for a full refitCircuits, sockets, appliance points and under-cabinet lighting	£500–£1,500
New cooker or induction circuitDedicated circuit from the consumer unit, tested and certified	£300–£700

Guide ranges cover the electrician's labour, cable, back boxes and standard white accessories with testing and certification; a consumer unit upgrade, decorative faceplates and plaster repairs are quoted separately if needed. Prices include VAT at 20%.

Fitting kitchens in older and newer Wellington homes

Across Shropshire you will often find timber-framed cottages, Victorian terraces, post-war new town houses and farmhouses, and each shapes the kitchen differently. Telford's new-town houses often have a compact galley or L-shaped kitchen, while older cottages in Shrewsbury and Ludlow may have small rooms with low beams.

Much of Shropshire has moderately hard to hard water, so limescale on taps and boiling water taps is worth planning for; check with your supplier. Rural lanes, farm tracks and medieval town centres with restricted parking can all complicate deliveries, so vehicle size and timing are planned in advance.

Do you need approval for kitchen electrics in Wellington?

In England, Part P makes a new circuit, such as a dedicated cooker or induction hob circuit, and a replacement consumer unit notifiable. That work is self-certified by an electrician registered with a competent person scheme, who notifies the council, or approved through building control. Adding sockets or spurs to an existing kitchen circuit is not notifiable in England, but it must still meet BS 7671 and should be recorded on a Minor Electrical Installation Works Certificate.

Shrewsbury and Ludlow have many listed timber-framed buildings and conservation areas, so new vents or internal alterations may need listed building consent or planning permission.

Practical advice for Wellington homeowners

Choose socket and switch finishes before second fix, especially metal faceplates, so they arrive in time and sit well with the handles and tap.
If you let a property in Shropshire, keep the kitchen certificates with your electrical inspection report so the next inspector can see what changed.
Find your consumer unit and take a photo of it before the survey of your Wellington home, so the electrician can see straight away whether it has spare ways.
Decide on lighting, island power and any boiling water tap before plastering, as cables are far harder to add after tiling.

Questions about kitchen electrics in Wellington

How much do kitchen electrics cost in Wellington?

Kitchen electrics in Wellington typically cost £250 to £500 including VAT for extra sockets or spurs on existing circuits, based on prices in the West Midlands. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover all of Wellington?

Yes. We work across Wellington, including the TF1 postcode district, and nearby towns such as Telford and Shrewsbury. Book a free survey visit and we will arrange a time that suits you.

Will I need a new consumer unit for a new kitchen?

Not always. If the existing consumer unit has spare ways, RCD protection and is in sound condition, new kitchen circuits can often be added to it. An older board with no RCD protection, no spare space or signs of damage may need replacing first. That is notifiable in England and Wales, and it is quoted separately once the electrician has inspected it at the survey.

Do I need an electrician to add sockets in a kitchen?

Yes, any kitchen wiring is a job for a qualified electrician. In England, adding sockets to an existing circuit is not notifiable, but it must meet BS 7671 and should be recorded on a Minor Works Certificate. In Wales the same job is notifiable because it extends a circuit in a kitchen. Scotland and Northern Ireland have no notification step, but the same wiring standard applies.

What is first fix and second fix in kitchen electrics?

First fix is the hidden part: running cables and fixing back boxes into walls and ceilings after the old kitchen is out and before plastering. Second fix comes after the units, worktops and tiling are in, when sockets, switches and appliance connections are fitted and the whole installation is tested. Getting positions right at first fix matters, because moving a box after tiling means cutting tiles.

Nearby places we cover

We also carry out kitchen electrics in these towns near Wellington: