Kitchen strip-out and removal in Wellington

Is kitchen strip-out and removal right for your Wellington kitchen?

Landlords across Shropshire sometimes need a damaged or dated rental kitchen removed between tenancies, so the replacement can be measured accurately from bare walls and fitted quickly.

Homeowners in Wellington often book a strip-out on its own when a builder or another fitter is handling the new kitchen but nobody has planned how the old one comes out safely. We cover all of Wellington, including the TF1 postcode district, and travel out to neighbouring towns across Shropshire.

What does kitchen strip-out and removal in Wellington include?

Here is what usually goes into kitchen strip-out and removal, adjusted to your Wellington kitchen after we have measured it:

Old tiles stripped and walls prepared for plaster, where that is agreed
Water isolated and supplies capped so the rest of the house keeps running water
Survey of gas, electrical and water positions and the route out of the house
Floors, doorways, stairs and the route to the skip or van protected
Gas supply disconnected and capped by a Gas Safe registered engineer
Kitchen circuits isolated and made safe by an electrician

What should you budget for kitchen strip-out and removal in Wellington?

As a starting point for Wellington, these ranges include VAT at 20% and allow for typical labour costs in the West Midlands. Costs in the West Midlands sit close to the national guide.

What should you budget for kitchen strip-out and removal in Wellington?
Typical project	Guide price
Old kitchen removed and disposed ofUnits, worktops and appliances, including skip hire	£200–£500
Removal with services made safeGas capped by a Gas Safe engineer, circuits made safe by an electrician	£300–£700
Strip-out back to bare wallsOld tiles removed and walls prepared for plaster	£500–£1,200

Guide ranges include labour, protection, waste removal or skip hire and, where listed, making services safe; asbestos testing or removal and replastering are priced separately. Prices include VAT at 20%.

Local homes and their kitchens

Typical homes in this part of Shropshire include timber-framed cottages, Victorian terraces, post-war new town houses and farmhouses. Telford's new-town houses often have a compact galley or L-shaped kitchen, while older cottages in Shrewsbury and Ludlow may have small rooms with low beams.

Much of Shropshire has moderately hard to hard water, so limescale on taps and boiling water taps is worth planning for; check with your supplier. Rural lanes, farm tracks and medieval town centres with restricted parking can all complicate deliveries, so vehicle size and timing are planned in advance.

Regulations for kitchen work in Wellington

Removing a kitchen needs no planning permission in England, but a listed home may need listed building consent before historic fittings are taken out. Only a Gas Safe registered engineer may disconnect and cap a gas supply, and circuits should be made safe by an electrician to BS 7671. A skip on the road usually needs a council permit, which the skip firm normally arranges, and waste should go with a carrier registered with the Environment Agency.

Shrewsbury and Ludlow have many listed timber-framed buildings and conservation areas, so new vents or internal alterations may need listed building consent or planning permission.

Planning ahead

Empty every cupboard, the fridge and the freezer the day before the strip-out, and defrost the freezer so it can be carried out without leaking.
Measure the hallway and doors on the route out; long worktops and tall larder units sometimes need cutting down to leave the house without damaging walls.
Let neighbours in your Wellington terrace or block know when the strip-out is booked; it is a noisy day, and a van or skip may need parking space.
Check where a skip can go; one on the road usually needs a council permit, which the skip firm normally arranges.

Questions about kitchen strip-out and removal in Wellington

How much does kitchen strip-out and removal cost in Wellington?

For removing and disposing of an old kitchen, budget around £200 to £500 including VAT in Wellington. That reflects typical costs in the West Midlands; we confirm the actual figure in writing once we have measured up.

Which parts of Wellington do you work in?

All of them. Our Shropshire coverage takes in the whole of Wellington, including the TF1 postcode district, as well as surrounding towns such as Telford. If you are unsure, send us your postcode.

What happens if asbestos is found during a kitchen strip-out?

Work in that area stops. Homes built before 2000 may contain asbestos in textured ceiling coatings, old floor tiles, some boiler cupboard boards and the bitumen pads under old steel sinks. Suspect material is sampled and tested by a specialist, and if it does contain asbestos it is removed by a specialist contractor under the asbestos regulations before the strip-out carries on.

Who disconnects the gas and electrics before a strip-out?

A Gas Safe registered engineer disconnects and caps the gas supply to the hob or cooker, which is a legal requirement everywhere in the UK. An electrician isolates the kitchen circuits and makes the cable ends safe to BS 7671, and the water is turned off and the supplies capped. Only then do the units and appliances come out.

Do I need a skip for a kitchen strip-out?

Not always. A small kitchen can often go in a van in one or two trips, while a larger strip-out with tiles and plaster usually needs a skip. A skip on your drive needs no permit, but one on the road usually needs a permit from the council or roads authority, which the skip firm normally arranges. We agree the method at the survey.

Also covering nearby towns

Neighbouring towns where we offer kitchen strip-out and removal: