Kitchen electrics in Shrewsbury

Why do people in Shrewsbury choose kitchen electrics?

Buyers of older houses across Shropshire sometimes find a consumer unit with no RCD protection or spare space, and want it dealt with before a new kitchen goes in.

Many kitchens in Shrewsbury were wired when a kettle and a toaster were the only things on the worktop, so a refit is the natural time to put sockets where they are really used. Our Shropshire coverage reaches every part of Shrewsbury (SY1) and out towards Wellington.

What do kitchen electrics in Shrewsbury include?

The exact scope is agreed after the survey, but a typical job in Shrewsbury covers:

First-fix cables and back boxes run before plastering or boarding
Supplies for the cooker hood, under-cabinet lights and a boiling water tap
Accessible isolation switches for integrated appliances, reachable without pulling units out
A check of the consumer unit, existing circuits and earthing before the layout is fixed
Second fix of sockets, switches and appliance connections once tiling is done
Testing, the correct certificate, and notification of the work where it is required

Guide prices for kitchen electrics in Shrewsbury

As a starting point for Shrewsbury, these ranges include VAT at 20% and allow for typical labour costs in the West Midlands. Prices across the West Midlands are broadly in line with UK averages.

Guide prices for kitchen electrics in Shrewsbury
Typical project	Guide price
Extra sockets or spurs on existing circuitsNew positions to suit the layout	£250–£500
Kitchen electrics for a full refitCircuits, sockets, appliance points and under-cabinet lighting	£500–£1,500
New cooker or induction circuitDedicated circuit from the consumer unit, tested and certified	£300–£700

Guide ranges cover the electrician's labour, cable, back boxes and standard white accessories with testing and certification; a consumer unit upgrade, decorative faceplates and plaster repairs are quoted separately if needed. Prices include VAT at 20%.

Fitting kitchens in older and newer Shrewsbury homes

The housing mix across Shropshire includes timber-framed cottages, Victorian terraces, post-war new town houses and farmhouses, so no two kitchen fits are quite alike. Telford's new-town houses often have a compact galley or L-shaped kitchen, while older cottages in Shrewsbury and Ludlow may have small rooms with low beams.

Rural lanes, farm tracks and medieval town centres with restricted parking can all complicate deliveries, so vehicle size and timing are planned in advance. Much of Shropshire has moderately hard to hard water, so limescale on taps and boiling water taps is worth planning for; check with your supplier.

Regulations for kitchen work in Shrewsbury

In England, Part P makes a new circuit, such as a dedicated cooker or induction hob circuit, and a replacement consumer unit notifiable. That work is self-certified by an electrician registered with a competent person scheme, who notifies the council, or approved through building control. Adding sockets or spurs to an existing kitchen circuit is not notifiable in England, but it must still meet BS 7671 and should be recorded on a Minor Electrical Installation Works Certificate.

Shrewsbury and Ludlow have many listed timber-framed buildings and conservation areas, so new vents or internal alterations may need listed building consent or planning permission.

Worth knowing before the fit

Keep your appliance manuals to hand, as the installation pages state the power rating and the type of isolation each appliance needs.
Find your consumer unit and take a photo of it before the survey of your Shrewsbury home, so the electrician can see straight away whether it has spare ways.
Walk round your Shrewsbury kitchen with the plan and mark where each small appliance will sit; the socket schedule is built from that list.
Count the appliances that will live on the worktop, then add a couple of spare sockets; extension leads across a worktop are a poor substitute.

Questions about kitchen electrics in Shrewsbury

How much do kitchen electrics cost in Shrewsbury?

For extra sockets or spurs on existing circuits, budget around £250 to £500 including VAT in Shrewsbury. That reflects typical costs in the West Midlands; we confirm the actual figure in writing once we have measured up.

Do you work near Shrewsbury as well?

Yes. As well as Shrewsbury itself, we cover the rest of Shropshire and nearby towns such as Wellington and Telford. The process is the same wherever the kitchen is.

What is first fix and second fix in kitchen electrics?

First fix is the hidden part: running cables and fixing back boxes into walls and ceilings after the old kitchen is out and before plastering. Second fix comes after the units, worktops and tiling are in, when sockets, switches and appliance connections are fitted and the whole installation is tested. Getting positions right at first fix matters, because moving a box after tiling means cutting tiles.

Will I need a new consumer unit for a new kitchen?

Not always. If the existing consumer unit has spare ways, RCD protection and is in sound condition, new kitchen circuits can often be added to it. An older board with no RCD protection, no spare space or signs of damage may need replacing first. That is notifiable in England and Wales, and it is quoted separately once the electrician has inspected it at the survey.

Does an induction hob need its own circuit?

Usually, yes. Most induction hobs draw too much power to run from a plug socket, so they are wired to a dedicated cooker circuit from the consumer unit. One circuit can sometimes feed both a hob and an oven if the cable and protection are sized for them. The electrician checks the hob rating against the existing circuit at the survey and tells you whether a new one is needed.

Nearby places we cover

Close to Shrewsbury? We cover these nearby towns too: