Kitchen underfloor heating in Wellington

Thinking about kitchen underfloor heating in Wellington?

If you are laying a new tiled floor in your Wellington kitchen anyway, that is the natural moment to put electric heating mats underneath it.

People planning a heat pump in Shropshire sometimes add underfloor heating to the kitchen at the same time, while the old floor is already up and the room is empty. Wellington sits about 3 miles north-west of Telford, and our Shropshire coverage takes in everything in between.

What does the job involve?

After the survey visit we write the scope down. For kitchen underfloor heating in Wellington it usually covers:

A survey of the subfloor, open floor area and existing heating system
Plinth heaters fitted under base units where wall space for a radiator is short
A heating layout drawn to the kitchen plan, clear of units and appliances
Electric mats or cables, or wet pipework connected through a manifold
Door thresholds and plinth heights checked against the new floor build-up
Insulation boards so the floor responds more quickly when the heating comes on

Guide prices for kitchen underfloor heating in Wellington

Typical kitchen underfloor heating prices for homes in Wellington, including VAT and adjusted for the West Midlands. Your own figure depends on the size of the kitchen, the layout and what is moving. Prices across the West Midlands are broadly in line with UK averages.

Guide prices for kitchen underfloor heating in Wellington
Typical project	Guide price
Electric underfloor heating, kitchen floorMat or cable system, insulation board and thermostat	£600–£1,500
Wet underfloor heating, kitchen floorPipes, manifold, screed or overlay boards	£1,500–£4,000
Plinth heater fitted under a base unitElectric or hydronic, where wall space is short	£250–£600

Guide prices cover the heating system, insulation boards, controls and connection with testing; the floor finish, subfloor repairs, a consumer unit upgrade and any boiler or heat pump changes are priced separately. Prices include VAT at 20%.

House types around Wellington and what they mean for a kitchen

Typical homes in this part of Shropshire include timber-framed cottages, Victorian terraces, post-war new town houses and farmhouses. Telford's new-town houses often have a compact galley or L-shaped kitchen, while older cottages in Shrewsbury and Ludlow may have small rooms with low beams.

Much of Shropshire has moderately hard to hard water, so limescale on taps and boiling water taps is worth planning for; check with your supplier. Rural lanes, farm tracks and medieval town centres with restricted parking can all complicate deliveries, so vehicle size and timing are planned in advance.

Building regulations, electrics and gas in Wellington

In England, electric underfloor heating needs a supply and a thermostat. A new dedicated circuit is notifiable under Part P and is certified through a competent person scheme or building control, while a fused spur from an existing circuit is not notifiable in England but must still meet BS 7671 and be certified. A wet system is joined to your existing heating, and any work on a gas boiler is for a Gas Safe registered engineer.

Shrewsbury and Ludlow have many listed timber-framed buildings and conservation areas, so new vents or internal alterations may need listed building consent or planning permission.

Tips before you start

If your Wellington home has a suspended timber floor, ask how the heating will be supported and insulated between the joists.
Ask for the finished floor height to be worked out before you order units for your Wellington kitchen, so plinths and appliances still fit.
Choose your floor finish first and check its maximum surface temperature, as it decides the thermostat setting and the type of system.
Allow time for screed or levelling compound to cure before tiles or other finishes go down, as laying too soon risks cracks and lifting.

Questions about kitchen underfloor heating in Wellington

How much does kitchen underfloor heating cost in Wellington?

Guide prices in Wellington are about £600 to £1,500 including VAT for electric underfloor heating for a kitchen floor. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Can you measure up in Wellington before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Wellington. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Will underfloor heating raise my kitchen floor?

Usually, yes. An electric mat with insulation board and tile adhesive adds a modest height, while a wet system in screed adds more. The new level affects door thresholds, the gap under integrated appliances and plinth heights, so it is measured at the survey and the units are set to suit. Low-profile overlay boards can reduce the rise where height is tight.

Can underfloor heating go under kitchen units?

No, it is not usually laid under fitted units, plinths or appliances. Heat trapped beneath a cabinet or appliance can build up and damage the system or the floor, and it warms nothing useful. The heating layout follows the kitchen plan, covering the open floor, walkways and any dining area, which is why the units are set out before the heating goes down.

How soon can a floor be tiled over underfloor heating?

It depends on what the heating is laid in. Thin levelling compounds over electric mats are generally ready far sooner than a traditional sand and cement screed over wet pipes, which needs much longer to dry. The product instructions set the curing time, and the heating should be brought up to temperature gradually, following the system's commissioning guidance, rather than used to dry the floor.

Kitchen underfloor heating near Wellington

Neighbouring towns where we offer kitchen underfloor heating: