Hob and oven installation · West Sussex
Hob and oven installation in Worthing
Looking for hob and oven installation in Worthing? We survey, quote and carry out hob and oven installation for homes across Worthing and the rest of West Sussex, with one contract from the first measure to the final check.
When does hob and oven installation make sense in Worthing?
Some people in Worthing buy a hob and oven online and need them fitted properly, with gas work by a Gas Safe registered engineer and electrics tested and certified.
If your Worthing kitchen has an old ceramic hob with a cracked top, an induction replacement may fit the same cut-out, though the circuit still needs checking. Kitchens in every part of Worthing are covered, and the survey visit is free wherever you are in West Sussex.
What does the job involve?
Your written quote lists everything included. For hob and oven installation, that normally means:
- Appliance models checked against worktop cut-outs, oven housings and existing supplies
- Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
- Old hob or oven disconnected safely and taken away for recycling
- Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models
- Built-in single and double ovens fixed into housings with their ventilation gaps
- Induction and ceramic hobs wired to a suitable cooker circuit and tested
How much does hob and oven installation cost in Worthing?
These guide ranges include VAT at 20% and are adjusted for prices in the South East. We confirm your price in writing after a free survey visit. Expect costs in the South East to sit somewhat above UK averages, reflecting local labour rates.
| Typical project | Guide price |
|---|---|
| Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested | £140–£340 |
| Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test | £140–£290 |
| Range cooker installedGas or dual fuel, levelled, stability bracket fitted | £170–£460 |
| New gas pipe run to a new hob positionPipework, testing and making good | £290–£920 |
Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.
Fitting kitchens in older and newer Worthing homes
In and around Worthing, homes range across 1930s semis, flint and brick cottages, post-war new town houses and seaside bungalows. Crawley's new-town houses often have a compact galley, while seaside bungalows in Worthing and Bognor Regis tend to have a small square kitchen beside the dining area.
West Sussex has mostly hard water, so limescale on taps, sinks and boiling water taps is common and a filter is worth considering. Coastal flats may have no lift, and village lanes on the edge of the Downs can be narrow for delivery lorries, so the delivery route is checked at the survey.
Regulations for kitchen work in Worthing
In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.
Homes in the South Downs National Park, listed flint cottages and conservation areas such as central Chichester may need consent for a new external vent.
Before you book hob and oven installation in Worthing
- Keep the hob's cut-out template and installation manual with the worktop plan, so a stone worktop for your kitchen in West Sussex can be cut correctly by the fabricator.
- Confirm whether your new oven sits under the worktop or in a tall housing, because the ventilation and fixing requirements differ between the two.
- Before buying an induction hob for your Worthing home, check the rating of the cooker circuit at the consumer unit, or ask for it to be checked at the survey.
- If the new hob sits away from the existing gas supply, allow for a new pipe run by a Gas Safe registered engineer.
Questions about hob and oven installation in Worthing
How much does hob and oven installation cost in Worthing?
Hob and oven installation in Worthing typically costs £140 to £340 including VAT for connecting a gas hob to an existing supply, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.
Do you cover all of Worthing?
Yes. We work across Worthing, including the BN11 postcode district, and nearby towns such as Lancing and Shoreham-by-Sea. Book a free survey visit and we will arrange a time that suits you.
Why does a range cooker need a stability bracket?
Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.
Who is allowed to connect a gas hob?
By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.
Does an induction hob need a new circuit?
Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.
Nearby places we cover
Close to Worthing? We cover these nearby towns too:
- Hob and oven installation in Lancing
- Hob and oven installation in Shoreham-by-Sea
- Hob and oven installation in Portslade
- Hob and oven installation in Littlehampton
- Hob and oven installation in Hove
- Hob and oven installation in Brighton
- Hob and oven installation across West Sussex