Sink and tap installation in Worthing

Why sink and tap installation for a Worthing home?

People in Worthing with low water pressure sometimes find a new tap disappointing, so checking the pressure before choosing a tap or boiling water tap saves trouble later.

If a new dishwasher or washing machine is going next to the sink in your Worthing home, the trap and waste connections usually need changing as well. We cover all of Worthing, including the BN11 postcode district, and travel out to neighbouring towns across West Sussex.

What is included in the work?

Your written quote lists everything included. For sink and tap installation, that normally means:

New sink fitted, sealed and connected to the existing supplies and waste
Boiling water tap fitted with its tank, filter and power supply in the cupboard
Every joint leak tested, with water flow and drainage checked before handover
Sink moved to a new position with new supply and waste runs
Isolation valves on the hot and cold supplies, with flexible tap tails connected
Inset sink cut-outs made on site in laminate and wood worktops

Sink and tap installation prices in Worthing

The figures below are guide prices for Worthing, including VAT and adjusted for typical costs across the South East. The fixed price comes after we have measured up. Prices in the South East usually run above the national guide, mainly because labour and parking cost more.

Sink and tap installation prices in Worthing
Typical project	Guide price
Sink and tap plumbed inIsolation valves, waste and trap	£230–£460
Boiling water tap installedTank under the sink, filter and power supply	£170–£400
Sink moved to a new positionNew supplies and waste run	£460–£1,200
Undermount sink in a stone worktopCut-out and polishing are done by the stone fabricator	Priced with the worktop

Guide ranges cover labour and fittings such as valves, tails and wastes; the sink and tap themselves are extra, and undermount cut-outs in stone are priced with the worktop by the fabricator. Prices include VAT at 20%.

House types around Worthing and what they mean for a kitchen

In and around Worthing, homes range across 1930s semis, flint and brick cottages, post-war new town houses and seaside bungalows. Crawley's new-town houses often have a compact galley, while seaside bungalows in Worthing and Bognor Regis tend to have a small square kitchen beside the dining area.

West Sussex has mostly hard water, so limescale on taps, sinks and boiling water taps is common and a filter is worth considering. Coastal flats may have no lift, and village lanes on the edge of the Downs can be narrow for delivery lorries, so the delivery route is checked at the survey.

Do you need approval for sink and tap installation in Worthing?

Replacing a sink and tap needs no approval in England, but the plumbing should meet the Water Supply (Water Fittings) Regulations 1999, including isolation valves and backflow protection. Connecting to an existing waste is routine, while a new connection to an underground drain involves building control. A new spur for a boiling water tap on an existing kitchen circuit is not notifiable under Part P, but it must meet BS 7671.

Homes in the South Downs National Park, listed flint cottages and conservation areas such as central Chichester may need consent for a new external vent.

Before you book sink and tap installation in Worthing

Ask whether a boiling water tap for your kitchen in West Sussex needs a filter, how often it should be changed and where it will sit in the cupboard.
For a ceramic farmhouse-style sink in your Worthing kitchen, confirm the base unit is designed for it, as a standard sink unit may not carry the weight.
Empty the sink cupboard before fitting day, and plan where cleaning products will go while the waste, trap and valves are being changed.
Keep isolation valves reachable under the sink, so the tap can be serviced or a leak stopped without turning off the whole house supply.

Questions about sink and tap installation in Worthing

How much does sink and tap installation cost in Worthing?

Sink and tap installation in Worthing typically costs £230 to £460 including VAT for plumbing in a new sink and tap, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Can you measure up in Worthing before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Worthing. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

What do I need for a boiling water tap?

A boiling water tap needs a tank in the cupboard under the sink, usually a socket or fused spur to power it, and often a filter, particularly where the water is hard. Some models have a minimum water pressure, so check yours before buying. The tap also needs a correctly sized hole in the sink or worktop and enough clear cupboard space for the tank and pipework.

What is the difference between an inset and an undermount sink?

An inset sink drops into a cut-out from above, with its rim resting on the worktop, and suits laminate, wood and stone. An undermount sink is fixed beneath the worktop so the edge of the cut-out is exposed, which usually calls for a solid, water-resistant material such as stone or solid surface. Undermount cut-outs in stone are cut and polished by the fabricator.

Can a dishwasher and washing machine drain through the sink waste?

Yes, in most kitchens. The sink trap can take an appliance connection on a spigot, or a separate standpipe can be fitted. The appliance hose needs to rise to the height its manufacturer specifies before it drops to the waste, so dirty water cannot siphon back. Two appliances can usually share a double-spigot trap, which we plan with the sink.

Nearby places we cover

We also carry out sink and tap installation in these towns near Worthing: