Hob and oven installation · East Sussex
Hob and oven installation in Portslade
Hob and oven installation for Portslade homes: gas, induction and ceramic hobs, built-in ovens and range cookers fitted and connected safely. Every job starts with a free survey visit and a written quote.

Why hob and oven installation for a Portslade home?
Keen cooks across East Sussex often choose a range cooker, which needs a level floor, the right clearances to the units and a stability bracket on gas models.
A new kitchen layout in Portslade sometimes puts the hob on an island or another wall, so gas pipework or a cooker circuit has to follow it to the new position. Homes right across Portslade are covered, as are nearby places such as Hove, Shoreham-by-Sea and the villages in between.
What does hob and oven installation in Portslade include?
The exact scope is agreed after the survey, but a typical job in Portslade covers:
- Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
- Old hob or oven disconnected safely and taken away for recycling
- Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models
- Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
- Built-in single and double ovens fixed into housings with their ventilation gaps
- Gas supply moved to a new hob position, with pipework tested and made good
Hob and oven installation prices in Portslade
Typical hob and oven installation prices for homes in Portslade, including VAT and adjusted for the South East. Your own figure depends on the size of the kitchen, the layout and what is moving. Prices in the South East usually run above the national guide, mainly because labour and parking cost more.
| Typical project | Guide price |
|---|---|
| Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested | £140–£340 |
| Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test | £140–£290 |
| Range cooker installedGas or dual fuel, levelled, stability bracket fitted | £170–£460 |
| New gas pipe run to a new hob positionPipework, testing and making good | £290–£920 |
Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.
Kitchens in homes around Portslade
Across East Sussex you will often find Regency townhouses and flats, Victorian terraces, 1930s semis and seaside bungalows, and each shapes the kitchen differently. Regency and Victorian houses split into flats often have small kitchens in former reception rooms, while 1930s semis usually have a compact kitchen at the back.
East Sussex has hard water, so limescale builds up on taps, kettles and boiling water taps, and a filter or softener is worth considering. Seafront flats without lifts, permit parking and steep streets in the coastal towns can make delivery and waste removal slower, so access needs planning.
Building regulations, electrics and gas in Portslade
In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.
Listed Regency buildings, conservation areas and homes inside the South Downs National Park may need consent for a new external vent, and flat owners usually need freeholder consent.
Worth knowing before the fit
- Ask the Gas Safe engineer for a record of the work and keep it with your home documents, especially if you let a property in East Sussex.
- If you are moving the hob in your Portslade kitchen, choose the cooker hood at the same time so the extraction and ducting can follow it.
- Confirm whether your new oven sits under the worktop or in a tall housing, because the ventilation and fixing requirements differ between the two.
- Check the induction hob's power rating against your existing cooker circuit, as induction hobs often need a dedicated circuit from the consumer unit.
Questions about hob and oven installation in Portslade
How much does hob and oven installation cost in Portslade?
For connecting a gas hob to an existing supply, budget around £140 to £340 including VAT in Portslade. That reflects typical costs in the South East; we confirm the actual figure in writing once we have measured up.
Do you cover all of Portslade?
Yes. We work across Portslade, including the BN41 postcode district, and nearby towns such as Hove and Shoreham-by-Sea. Book a free survey visit and we will arrange a time that suits you.
Does an induction hob need a new circuit?
Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.
Why does a range cooker need a stability bracket?
Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.
Who is allowed to connect a gas hob?
By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.
Nearby places we cover
Close to Portslade? We cover these nearby towns too:
- Hob and oven installation in Hove
- Hob and oven installation in Shoreham-by-Sea
- Hob and oven installation in Brighton
- Hob and oven installation in Lancing
- Hob and oven installation in Worthing
- Hob and oven installation in Rottingdean
- Hob and oven installation across East Sussex
