Kitchen Installers UK

Hob and oven installation · East Sussex

Hob and oven installation in Hove

If you live in Hove and need hob and oven installation, we can measure the room, send an itemised written quote and book every trade in the right order until the kitchen is handed over.

Guide price£140 to £920
Postcodes includeBN3
Timescale2 to 4 hours for most hobs and ovens
A black induction hob set into a pale quartz worktop, with a built-in oven in a tall housing to one side

Thinking about hob and oven installation in Hove?

Families in Hove adding a double oven may find the existing circuit is not rated for it, so planning the electrics early avoids a delay on fitting day.

If the oven in your Hove kitchen has failed, a like-for-like built-in replacement is usually a short job, provided the new model fits the existing housing. If your home is in Hove or close by in Brighton or Portslade, the same survey, quote and fitting process applies.

What we cover for hob and oven installation in Hove

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

  • Induction and ceramic hobs wired to a suitable cooker circuit and tested
  • Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
  • Appliance models checked against worktop cut-outs, oven housings and existing supplies
  • Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
  • Built-in single and double ovens fixed into housings with their ventilation gaps
  • Old hob or oven disconnected safely and taken away for recycling

Guide prices for hob and oven installation in Hove

Typical hob and oven installation prices for homes in Hove, including VAT and adjusted for the South East. Your own figure depends on the size of the kitchen, the layout and what is moving. Labour in the South East generally costs more than the UK average, which lifts these ranges a little.

Guide prices for hob and oven installation in Hove
Typical projectGuide price
Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested£140–£340
Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test£140–£290
Range cooker installedGas or dual fuel, levelled, stability bracket fitted£170–£460
New gas pipe run to a new hob positionPipework, testing and making good£290–£920

Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.

Fitting kitchens in older and newer Hove homes

Across East Sussex you will often find Regency townhouses and flats, Victorian terraces, 1930s semis and seaside bungalows, and each shapes the kitchen differently. Regency and Victorian houses split into flats often have small kitchens in former reception rooms, while 1930s semis usually have a compact kitchen at the back.

Seafront flats without lifts, permit parking and steep streets in the coastal towns can make delivery and waste removal slower, so access needs planning. East Sussex has hard water, so limescale builds up on taps, kettles and boiling water taps, and a filter or softener is worth considering.

What rules apply to hob and oven installation in Hove?

In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.

Listed Regency buildings, conservation areas and homes inside the South Downs National Park may need consent for a new external vent, and flat owners usually need freeholder consent.

Planning ahead

  • Ask the Gas Safe engineer for a record of the work and keep it with your home documents, especially if you let a property in East Sussex.
  • Confirm whether your new oven sits under the worktop or in a tall housing, because the ventilation and fixing requirements differ between the two.
  • If you are replacing an old cooker with a separate hob and oven in your Hove kitchen, ask for the gas supply position and condition to be checked first.
  • If the new hob sits away from the existing gas supply, allow for a new pipe run by a Gas Safe registered engineer.

Questions about hob and oven installation in Hove

How much does hob and oven installation cost in Hove?

Hob and oven installation in Hove typically costs £140 to £340 including VAT for connecting a gas hob to an existing supply, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you work near Hove as well?

Yes. As well as Hove itself, we cover the rest of East Sussex and nearby towns such as Brighton and Portslade. The process is the same wherever the kitchen is.

Why does a range cooker need a stability bracket?

Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.

Do built-in ovens need ventilation?

Yes. Built-in ovens release heat, and their installation instructions set the gaps and openings the housing must leave, often at the back or beneath the oven. Blocking them can overheat the surrounding units and the oven's own controls. An oven under the worktop and one in a tall housing have different requirements, so we check the instructions for your model before fitting.

Who is allowed to connect a gas hob?

By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.

Hob and oven installation in neighbouring towns

Close to Hove? We cover these nearby towns too:

Combine hob and oven installation with other work

Free survey visit

Book a free survey visit in Hove

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price