Hob and oven installation · Shropshire
Hob and oven installation in Wellington
From the survey to handover, hob and oven installation in Wellington is run by us as one job, with the fitters and trades booked in the right order.
Is hob and oven installation right for your Wellington kitchen?
If the oven in your Wellington kitchen has failed, a like-for-like built-in replacement is usually a short job, provided the new model fits the existing housing.
Some people in Wellington buy a hob and oven online and need them fitted properly, with gas work by a Gas Safe registered engineer and electrics tested and certified. We work throughout Wellington (TF1) and across the wider Shropshire area.
What we cover for hob and oven installation in Wellington
After the survey visit we write the scope down. For hob and oven installation in Wellington it usually covers:
- Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models
- Old hob or oven disconnected safely and taken away for recycling
- Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
- Built-in single and double ovens fixed into housings with their ventilation gaps
- Induction and ceramic hobs wired to a suitable cooker circuit and tested
- Gas supply moved to a new hob position, with pipework tested and made good
How much does hob and oven installation cost in Wellington?
Use these ranges to plan your budget. They include VAT, reflect costs in the West Midlands, and are firmed up once we have seen your Wellington kitchen. Costs in the West Midlands sit close to the national guide.
| Typical project | Guide price |
|---|---|
| Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested | £120–£300 |
| Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test | £120–£250 |
| Range cooker installedGas or dual fuel, levelled, stability bracket fitted | £150–£400 |
| New gas pipe run to a new hob positionPipework, testing and making good | £250–£800 |
Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.
What kind of kitchens do we fit in Wellington?
The housing mix across Shropshire includes timber-framed cottages, Victorian terraces, post-war new town houses and farmhouses, so no two kitchen fits are quite alike. Telford's new-town houses often have a compact galley or L-shaped kitchen, while older cottages in Shrewsbury and Ludlow may have small rooms with low beams.
Much of Shropshire has moderately hard to hard water, so limescale on taps and boiling water taps is worth planning for; check with your supplier. Rural lanes, farm tracks and medieval town centres with restricted parking can all complicate deliveries, so vehicle size and timing are planned in advance.
Building regulations, electrics and gas in Wellington
In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.
Shrewsbury and Ludlow have many listed timber-framed buildings and conservation areas, so new vents or internal alterations may need listed building consent or planning permission.
Planning ahead
- Confirm whether your new oven sits under the worktop or in a tall housing, because the ventilation and fixing requirements differ between the two.
- If you are moving the hob in your Wellington kitchen, choose the cooker hood at the same time so the extraction and ducting can follow it.
- Keep the hob's cut-out template and installation manual with the worktop plan, so a stone worktop for your kitchen in Shropshire can be cut correctly by the fabricator.
- Check the induction hob's power rating against your existing cooker circuit, as induction hobs often need a dedicated circuit from the consumer unit.
Questions about hob and oven installation in Wellington
How much does hob and oven installation cost in Wellington?
For connecting a gas hob to an existing supply, budget around £120 to £300 including VAT in Wellington. That reflects typical costs in the West Midlands; we confirm the actual figure in writing once we have measured up.
Can you measure up in Wellington before quoting?
Yes. Every quote starts with a free, no-obligation survey visit to your home in Wellington. We measure the room, check the walls, floor and service positions, then send an itemised written quote.
Does an induction hob need a new circuit?
Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.
Why does a range cooker need a stability bracket?
Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.
Who is allowed to connect a gas hob?
By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.
Nearby places we cover
Neighbouring towns where we offer hob and oven installation:
- Hob and oven installation in Telford
- Hob and oven installation in Shrewsbury
- Hob and oven installation in Bridgnorth
- Hob and oven installation in Market Drayton
- Hob and oven installation in Stafford
- Hob and oven installation in Wolverhampton
- Hob and oven installation across Shropshire