Cooker hood installation in Wellington

What prompts cooker hood installation in Wellington?

If condensation runs down the windows of your Wellington kitchen whenever you cook, the hood may be recirculating, undersized or ducted through a long, flexible run.

If your Wellington house has thick solid walls, core drilling a neat hole for the duct takes the right equipment and careful positioning of the outside grille. Our Shropshire coverage reaches every part of Wellington (TF1) and out towards Telford.

What does the job involve?

After the survey visit we write the scope down. For cooker hood installation in Wellington it usually covers:

Survey of the hob position, duct route, outside wall and any open-flued appliance
Core drilling through the outside wall and an external grille fitted and sealed
Short, straight runs of rigid ducting wherever the route allows
Island and ceiling hoods fixed into the ceiling structure by two people
Recirculating hoods fitted with carbon filters, and their limits explained
Power supply connected by an electrician and tested to BS 7671

What should you budget for cooker hood installation in Wellington?

These guide ranges include VAT at 20% and are adjusted for prices in the West Midlands. We confirm your price in writing after a free survey visit. For the West Midlands, these ranges are close to the national figures.

What should you budget for cooker hood installation in Wellington?
Typical project	Guide price
Like-for-like cooker hood swapSame position and ducting	£120–£240
New ducted hood through an outside wallCore drilling, ducting run and external grille	£300–£900
Island or ceiling hood installedTwo-person install, fixings to the ceiling structure	£300–£630
Recirculating hood fittedNo ducting; carbon filters need replacing	£120–£300

Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.

Local homes and their kitchens

Typical homes in this part of Shropshire include timber-framed cottages, Victorian terraces, post-war new town houses and farmhouses. Telford's new-town houses often have a compact galley or L-shaped kitchen, while older cottages in Shrewsbury and Ludlow may have small rooms with low beams.

Rural lanes, farm tracks and medieval town centres with restricted parking can all complicate deliveries, so vehicle size and timing are planned in advance. Much of Shropshire has moderately hard to hard water, so limescale on taps and boiling water taps is worth planning for; check with your supplier.

Regulations for kitchen work in Wellington

In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.

Shrewsbury and Ludlow have many listed timber-framed buildings and conservation areas, so new vents or internal alterations may need listed building consent or planning permission.

Getting the most from your cooker hood installation

If you live in a flat in Shropshire, ask the freeholder, factor or managing agent about outside vents before you buy a ducted hood.
For an island hood in your Wellington kitchen, settle the hood position before the ceiling is boarded, so timber supports can be added in the right place.
Before choosing a hood for your Wellington kitchen, find the nearest outside wall to the hob, because the shorter the duct run, the better the extraction.
If the kitchen has an open-flued boiler or gas fire, a Gas Safe registered engineer should carry out a spillage test after the hood is fitted.

Questions about cooker hood installation in Wellington

How much does cooker hood installation cost in Wellington?

Cooker hood installation in Wellington typically costs £120 to £240 including VAT for a like-for-like cooker hood swap, based on prices in the West Midlands. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Which parts of Wellington do you work in?

All of them. Our Shropshire coverage takes in the whole of Wellington, including the TF1 postcode district, as well as surrounding towns such as Telford. If you are unsure, send us your postcode.

Can a ducted cooker hood be fitted in a flat?

Often, but check consents first. A new vent through the outside wall of a flat may need planning permission and the freeholder's written consent, and some leases do not allow it at all. Where an outside vent is not possible, a recirculating hood can be fitted, with a separate extract fan or other ventilation dealing with moisture. Listed buildings may also need listed building consent.

Why might a cooker hood need a spillage test?

Because a hood pulling air out of a room can draw fumes back down the flue of an open-flued gas appliance, such as some older boilers or gas fires. Where the kitchen, or a room open to it, has one, a Gas Safe registered engineer should carry out a spillage test with the hood running at full speed. Room-sealed boilers are not affected in the same way.

How high should a cooker hood be above the hob?

At least the minimum distance given by the manufacturers. Both the hood and the hob instructions set a minimum gap between them, and where they differ the greater figure should be used. Gas hobs usually need more clearance than induction. A hood fitted too low is a fire risk, while one fitted much higher than recommended captures less steam.

Cooker hood installation near Wellington

Neighbouring towns where we offer cooker hood installation: