Hob and oven installation · England
Hob and oven installation in Shropshire
Hob and oven installation in Shropshire starts with a free visit to measure up, then a written scope and quote before any work begins.
Why hob and oven installation for a Shropshire home?
Many households in Shropshire switch from gas to induction when they refit, which can mean a new cooker circuit and the old gas supply capped off safely.
A new kitchen layout in Shropshire sometimes puts the hob on an island or another wall, so gas pipework or a cooker circuit has to follow it to the new position.
What does hob and oven installation in Shropshire include?
Your written quote lists everything included. For hob and oven installation, that normally means:
- Appliance models checked against worktop cut-outs, oven housings and existing supplies
- Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
- Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
- Induction and ceramic hobs wired to a suitable cooker circuit and tested
- Built-in single and double ovens fixed into housings with their ventilation gaps
- Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models
- Gas supply moved to a new hob position, with pipework tested and made good
- Old hob or oven disconnected safely and taken away for recycling
How much does hob and oven installation cost in Shropshire?
These guide ranges include VAT at 20% and are adjusted for prices in the West Midlands. We confirm your price in writing after a free survey visit. For the West Midlands, these ranges are close to the national figures.
| Typical project | Guide price |
|---|---|
| Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested | £120–£300 |
| Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test | £120–£250 |
| Range cooker installedGas or dual fuel, levelled, stability bracket fitted | £150–£400 |
| New gas pipe run to a new hob positionPipework, testing and making good | £250–£800 |
Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.
Kitchens in homes across Shropshire
The housing mix across Shropshire includes timber-framed cottages, Victorian terraces, post-war new town houses and farmhouses, so no two kitchen fits are quite alike. Telford's new-town houses often have a compact galley or L-shaped kitchen, while older cottages in Shrewsbury and Ludlow may have small rooms with low beams.
Much of Shropshire has moderately hard to hard water, so limescale on taps and boiling water taps is worth planning for; check with your supplier. Rural lanes, farm tracks and medieval town centres with restricted parking can all complicate deliveries, so vehicle size and timing are planned in advance.
Telford's new-town houses often have small original kitchens, so owners may remove a partition to open them into the dining area. Rural farmhouses and cottages are frequently off the gas grid, so cooking may run on LPG, an oil-fired range or all-electric induction.
Rules for hob and oven installation in Shropshire
In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.
Shrewsbury and Ludlow have many listed timber-framed buildings and conservation areas, so new vents or internal alterations may need listed building consent or planning permission.
Before you start
- Check the induction hob's power rating against your existing cooker circuit, as induction hobs often need a dedicated circuit from the consumer unit.
- Follow the hood and hob manufacturers' instructions on the minimum distance between them; gas hobs usually need more clearance than induction.
- A range cooker needs a level, firm floor and, for gas and dual-fuel models, a stability bracket so it cannot tip when the door is loaded.
- Measure the oven housing against the installation dimensions, including the ventilation gaps at the back or base that the manufacturer requires.
- Confirm whether your new oven sits under the worktop or in a tall housing, because the ventilation and fixing requirements differ between the two.
- If you are moving the hob in your Shropshire kitchen, choose the cooker hood at the same time so the extraction and ducting can follow it.
Questions about hob and oven installation in Shropshire
How much does hob and oven installation cost in Shropshire?
Guide prices in Shropshire are about £120 to £300 including VAT for connecting a gas hob to an existing supply. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.
Do you cover the whole of Shropshire?
Yes. We carry out hob and oven installation across Shropshire, including Telford, Shrewsbury, Wellington and Oswestry. Every job starts with a free survey visit and an itemised written quote.
Does an induction hob need a new circuit?
Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.
Who is allowed to connect a gas hob?
By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.
Why does a range cooker need a stability bracket?
Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.
Hob and oven installation in towns across Shropshire
Choose a town for local guide prices and postcode coverage:
- Hob and oven installation in Telford
- Hob and oven installation in Shrewsbury
- Hob and oven installation in Wellington
- Hob and oven installation in Oswestry
- Hob and oven installation in Bridgnorth
- Hob and oven installation in Market Drayton
- Hob and oven installation in Ludlow
- Hob and oven installation in Whitchurch, Shropshire