Hob and oven installation in Frome

Why hob and oven installation for a Frome home?

Many households in Frome switch from gas to induction when they refit, which can mean a new cooker circuit and the old gas supply capped off safely.

Families in Frome adding a double oven may find the existing circuit is not rated for it, so planning the electrics early avoids a delay on fitting day. Kitchens in every part of Frome are covered, and the survey visit is free wherever you are in Somerset.

What is included in the work?

Your written quote lists everything included. For hob and oven installation, that normally means:

Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
Appliance models checked against worktop cut-outs, oven housings and existing supplies
Induction and ceramic hobs wired to a suitable cooker circuit and tested
Old hob or oven disconnected safely and taken away for recycling
Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
Built-in single and double ovens fixed into housings with their ventilation gaps

Guide prices for hob and oven installation in Frome

These guide ranges include VAT at 20% and are adjusted for prices in the South West. We confirm your price in writing after a free survey visit. For the South West, these ranges are close to the national figures.

Guide prices for hob and oven installation in Frome
Typical project	Guide price
Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested	£120–£310
Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test	£120–£260
Range cooker installedGas or dual fuel, levelled, stability bracket fitted	£150–£410
New gas pipe run to a new hob positionPipework, testing and making good	£260–£820

Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.

What kind of kitchens do we fit in Frome?

The housing mix across Somerset includes Georgian townhouses, Victorian terraces, stone cottages and post-war estate houses, so no two kitchen fits are quite alike. Georgian townhouses in Bath often have kitchens at lower-ground level or in flats on upper floors, while Victorian terraces in Taunton and Yeovil tend to have a narrow back galley.

Steep streets and controlled parking in Bath, upper-floor flats without lifts and narrow village lanes can each make delivering worktops slower. Somerset's mains water is mostly hard, so limescale on taps and boiling water taps is common, and a filter or softener can help keep them working well.

What rules apply to hob and oven installation in Frome?

In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.

Bath is a World Heritage city with many listed buildings, and homes in Exmoor National Park or conservation areas may need consent for new vents or internal changes.

Tips before you start

Before buying an induction hob for your Frome home, check the rating of the cooker circuit at the consumer unit, or ask for it to be checked at the survey.
If you are replacing an old cooker with a separate hob and oven in your Frome kitchen, ask for the gas supply position and condition to be checked first.
If your Frome home has an open-flued gas appliance, mention it at the survey, because any new extraction above the hob will need a spillage test.
Measure the oven housing against the installation dimensions, including the ventilation gaps at the back or base that the manufacturer requires.

Questions about hob and oven installation in Frome

How much does hob and oven installation cost in Frome?

Guide prices in Frome are about £120 to £310 including VAT for connecting a gas hob to an existing supply. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Can you measure up in Frome before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Frome. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Does an induction hob need a new circuit?

Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.

Do built-in ovens need ventilation?

Yes. Built-in ovens release heat, and their installation instructions set the gaps and openings the housing must leave, often at the back or beneath the oven. Blocking them can overheat the surrounding units and the oven's own controls. An oven under the worktop and one in a tall housing have different requirements, so we check the instructions for your model before fitting.

Who is allowed to connect a gas hob?

By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.

Hob and oven installation near Frome

Close to Frome? We cover these nearby towns too: