Hob and oven installation in Bath

Who usually needs hob and oven installation in Bath?

Families in Bath adding a double oven may find the existing circuit is not rated for it, so planning the electrics early avoids a delay on fitting day.

Many households in Bath switch from gas to induction when they refit, which can mean a new cooker circuit and the old gas supply capped off safely. We cover all of Bath, including the BA1 postcode district, and travel out to neighbouring towns across Somerset.

What is in a typical job?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Appliance models checked against worktop cut-outs, oven housings and existing supplies
Induction and ceramic hobs wired to a suitable cooker circuit and tested
Built-in single and double ovens fixed into housings with their ventilation gaps
Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models
Gas supply moved to a new hob position, with pipework tested and made good

What should you budget for hob and oven installation in Bath?

The figures below are guide prices for Bath, including VAT and adjusted for typical costs across the South West. The fixed price comes after we have measured up. Costs in the South West sit close to the national guide.

What should you budget for hob and oven installation in Bath?
Typical project	Guide price
Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested	£120–£310
Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test	£120–£260
Range cooker installedGas or dual fuel, levelled, stability bracket fitted	£150–£410
New gas pipe run to a new hob positionPipework, testing and making good	£260–£820

Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.

Local homes and their kitchens

You will find Georgian townhouses, Victorian terraces, stone cottages and post-war estate houses throughout Somerset. Georgian townhouses in Bath often have kitchens at lower-ground level or in flats on upper floors, while Victorian terraces in Taunton and Yeovil tend to have a narrow back galley.

Steep streets and controlled parking in Bath, upper-floor flats without lifts and narrow village lanes can each make delivering worktops slower. Somerset's mains water is mostly hard, so limescale on taps and boiling water taps is common, and a filter or softener can help keep them working well.

Building regulations, electrics and gas in Bath

In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.

Bath is a World Heritage city with many listed buildings, and homes in Exmoor National Park or conservation areas may need consent for new vents or internal changes.

Practical advice for Bath homeowners

If you are moving the hob in your Bath kitchen, choose the cooker hood at the same time so the extraction and ducting can follow it.
Measure the gap for a range cooker at worktop height and at floor level, as older walls and thick skirting can narrow the space more than expected.
Before buying an induction hob for your Bath home, check the rating of the cooker circuit at the consumer unit, or ask for it to be checked at the survey.
Follow the hood and hob manufacturers' instructions on the minimum distance between them; gas hobs usually need more clearance than induction.

Questions about hob and oven installation in Bath

How much does hob and oven installation cost in Bath?

For connecting a gas hob to an existing supply, budget around £120 to £310 including VAT in Bath. That reflects typical costs in the South West; we confirm the actual figure in writing once we have measured up.

Do you cover all of Bath?

Yes. We work across Bath, including the BA1 postcode district, and nearby towns such as Keynsham and Trowbridge. Book a free survey visit and we will arrange a time that suits you.

Who is allowed to connect a gas hob?

By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.

Does an induction hob need a new circuit?

Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.

Do built-in ovens need ventilation?

Yes. Built-in ovens release heat, and their installation instructions set the gaps and openings the housing must leave, often at the back or beneath the oven. Blocking them can overheat the surrounding units and the oven's own controls. An oven under the worktop and one in a tall housing have different requirements, so we check the instructions for your model before fitting.

Also covering nearby towns

Neighbouring towns where we offer hob and oven installation: