Hob and oven installation in Exeter

Is hob and oven installation right for your Exeter kitchen?

A new kitchen layout in Exeter sometimes puts the hob on an island or another wall, so gas pipework or a cooker circuit has to follow it to the new position.

Landlords in Devon replacing a worn cooker between tenancies need a safe gas connection or a suitable circuit, with the work properly recorded for their property files. We cover all of Exeter, including the EX2 postcode district, and travel out to neighbouring towns across Devon.

What is included in the work?

Your written quote lists everything included. For hob and oven installation, that normally means:

Gas supply moved to a new hob position, with pipework tested and made good
Built-in single and double ovens fixed into housings with their ventilation gaps
Appliance models checked against worktop cut-outs, oven housings and existing supplies
Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
Induction and ceramic hobs wired to a suitable cooker circuit and tested
Old hob or oven disconnected safely and taken away for recycling

Guide prices for hob and oven installation in Exeter

Use these ranges to plan your budget. They include VAT, reflect costs in the South West, and are firmed up once we have seen your Exeter kitchen. Prices across the South West are broadly in line with UK averages.

Guide prices for hob and oven installation in Exeter
Typical project	Guide price
Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested	£120–£310
Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test	£120–£260
Range cooker installedGas or dual fuel, levelled, stability bracket fitted	£150–£410
New gas pipe run to a new hob positionPipework, testing and making good	£260–£820

Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.

Kitchens in homes around Exeter

Across Devon you will often find cob and thatched cottages, Victorian terraces, post-war houses and flats and seaside bungalows, and each shapes the kitchen differently. Victorian terraces in Exeter and Torbay often have a narrow back kitchen, while post-war houses and seaside bungalows usually have a square room that suits an L-shape.

Single-track lanes, steep town streets and cottages with no parking can make deliveries slow, so long worktops and tall units need a planned route into the house. Much of Devon has soft mains water, which is kind to taps and appliances, though some eastern parts are harder, so check with your supplier.

What rules apply to hob and oven installation in Exeter?

In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.

Homes within Dartmoor or Exmoor national parks, listed thatched cottages and conservation areas may need consent before a new extractor vent goes through an outside wall.

Planning ahead

Before buying an induction hob for your Exeter home, check the rating of the cooker circuit at the consumer unit, or ask for it to be checked at the survey.
If your Exeter home has an open-flued gas appliance, mention it at the survey, because any new extraction above the hob will need a spillage test.
Keep the hob's cut-out template and installation manual with the worktop plan, so a stone worktop for your kitchen in Devon can be cut correctly by the fabricator.
If the new hob sits away from the existing gas supply, allow for a new pipe run by a Gas Safe registered engineer.

Questions about hob and oven installation in Exeter

How much does hob and oven installation cost in Exeter?

Hob and oven installation in Exeter typically costs £120 to £310 including VAT for connecting a gas hob to an existing supply, based on prices in the South West. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover all of Exeter?

Yes. We work across Exeter, including the EX2 postcode district, and nearby towns such as Exmouth and Tiverton. Book a free survey visit and we will arrange a time that suits you.

Does an induction hob need a new circuit?

Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.

Do built-in ovens need ventilation?

Yes. Built-in ovens release heat, and their installation instructions set the gaps and openings the housing must leave, often at the back or beneath the oven. Blocking them can overheat the surrounding units and the oven's own controls. An oven under the worktop and one in a tall housing have different requirements, so we check the instructions for your model before fitting.

Why does a range cooker need a stability bracket?

Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.

Hob and oven installation near Exeter

Neighbouring towns where we offer hob and oven installation: